IKEA KNOPPÄNG 405.607.92 Picture Frame instructions manual

The IKEA KNOPPÄNG 405.607.92 is a versatile picture frame designed for easy assembly and display of your favorite photos or artwork. It features a simple, modern design suitable for various room styles. Below are key sections covering parts identification, assembly instructions, mounting options, care guidelines, and safety information.

1. Parts Included 2. Tools Required 3. Assembly Instructions 4. Mounting Options 5. Inserting & Changing Pictures 6. Care & Maintenance 7. Specifications 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Parts Included

Before assembly, verify all parts are present. Key components: Frame front (with glass/acrylic), Frame back, Stand leg, Mounting hardware, Instruction sheet.

Part	Quantity	Description
Frame front	1	Main frame with transparent cover
Frame back	1	Back panel with stand slot and hanging slots
Stand leg	1	Foldable leg for tabletop display
Mounting screws	2	For wall mounting (if applicable)
Wall anchors	2	For drywall mounting
Instruction sheet	1	This manual

Tools Required

No special tools needed for basic assembly. For wall mounting: Phillips screwdriver, pencil, level, drill (for hard walls).

For tabletop use: Hands only.
For wall mounting: Phillips screwdriver, pencil, level, drill (optional).

NOTE: Ensure you have the correct tools before starting wall mounting.

Assembly Instructions

Follow these steps for quick assembly. Work on a clean, soft surface to avoid scratches.

Lay the frame front face down on a soft cloth.
Insert your photo or artwork into the frame, ensuring it is centered.
Place the frame back over the photo, aligning it with the front.
Secure the back by pressing the metal or plastic clips around the edges until they snap into place.
For tabletop display: Attach the stand leg to the slot on the back panel and fold it out.

CAUTION! Handle the glass/acrylic front with care to avoid breakage or scratches.

Mounting Options

The frame supports both tabletop and wall mounting.

Tabletop: Use the included stand leg. Ensure the frame is on a stable, level surface.
Wall Mounting: Use the keyhole slots or hanging wire on the back. Mark wall positions with a pencil, use a level, and install screws/anchors.
Orientation: Can be hung vertically or horizontally.

WARNING! For wall mounting, ensure screws are securely fastened into wall studs or use appropriate anchors for wall type. Do not hang over beds or seating areas.

Inserting & Changing Pictures

Easy to update your displayed image.

Lay the frame face down on a soft surface.
Release the clips or tabs holding the back panel.
Remove the back panel and the current picture.
Insert the new picture, ensuring it is centered within the frame opening.
Replace the back panel and secure all clips.
Check the front to ensure the picture is correctly positioned.

Tip: Use a dry, clean cloth to handle the glass/acrylic and picture to avoid smudges.

Care & Maintenance

To keep your frame looking new.

Cleaning: Use a soft, dry or slightly damp cloth to wipe the frame and glass/acrylic. Do not use abrasive cleaners, solvents, or spray directly on the frame.
Storage: Store in a dry place, away from direct sunlight or heat sources to prevent warping or fading.
Handling: Always support the frame from the bottom when moving; do not lift by the stand leg or top edge.

CAUTION! Never use harsh chemicals; they may damage the frame finish or transparency.

Specifications

Model: KNOPPÄNG 405.607.92
Frame Material: Particleboard, Paper foil, Acrylic glass
Cover: Transparent acrylic (shatter-resistant)
Color: Black/Brown (as per variant)
Picture Size: Fits 30x40 cm (approx. 12x16 inch) image
External Dimensions: Approximately 34.5 x 44.5 cm (13.6" x 17.5")
Weight: Approximately 1.5 kg (3.3 lbs)
Mounting: Tabletop stand and wall hanging slots

Safety Information

Important safety notices for use and assembly.

Choking Hazard: Small parts included. Keep away from children under 3 years.
Wall Mounting: Ensure secure installation to prevent falling. Check stability periodically.
Glass/Acrylic: Although acrylic is used, handle with care. If broken, dispose of properly to avoid injury.
Environment: Keep away from open flames, excessive heat, and damp conditions.

WARNING! Do not place heavy objects on top of the frame. Not intended for use as a shelf.

Warranty & Support

IKEA limited warranty applies. For product support or spare parts:

Visit your local IKEA store.
Contact IKEA customer service online at www.ikea.com.
Refer to your purchase receipt for warranty details.

This product is covered by IKEA's guarantee. See the IKEA warranty leaflet for full terms and conditions.

Troubleshooting

Issue	Possible Cause	Solution
Frame won't close	Picture too thick or not aligned	Ensure picture is flat and centered; check for obstructions.
Stand leg is wobbly	Not fully inserted or on uneven surface	Push leg firmly into slot; place on level surface.
Frame leans forward on table	Stand leg not angled correctly	Adjust the leg to a wider angle for better support.
Difficult to hang level	Wall uneven or marks incorrect	Use a level when marking screw positions; double-check measurements.
Dust under glass/acrylic	Dust trapped during assembly	Disassemble carefully, clean picture and inside of cover, reassemble.

Replacement Parts: For missing or damaged parts, contact IKEA customer service with the article number (405.607.92).

Support: www.ikea.com or visit your local IKEA store.