IKEA KLÖVEN 193.031.39 Armchair instructions manual

The IKEA KLÖVEN 193.031.39 is a modern armchair designed for comfort and style. It features a sturdy frame, removable seat cushion, and a timeless design suitable for various room settings. This manual provides essential information for safe assembly, proper use, care, and maintenance of your new armchair. Below are key sections covering safety, parts identification, assembly steps, usage guidelines, and troubleshooting.

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Armchair frame sections, seat cushion, backrest, armrests, legs, and hardware pack.

Safety Information

Read all instructions before assembly. Ensure a clean, spacious work area.

1. Assembly: Requires two adults. Keep children and pets away during assembly.
2. Inspect: Check all parts for damage before assembly. Do not use damaged parts.
3. Tools: Use only the provided Allen key. Do not overtighten screws.
4. Stability: Ensure all connections are tight and chair is stable before use.

WARNING! Maximum load capacity: 250 lbs (113 kg). Do not stand on the chair. Avoid placing near heat sources or in damp areas.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

1. Attach Legs: Place frame upside down on soft surface. Screw front and rear legs into pre-drilled holes using provided bolts.
2. Connect Side Frames: Align left and right frame pieces. Secure using long screws at top and bottom connection points.
3. Install Backrest: Position backrest panel between side frames. Secure with screws through side frames into backrest.
4. Attach Armrests: Place armrests on top of side frames. Fasten with screws from underneath.
5. Final Check: Tighten all screws. Turn chair upright. Place seat cushion onto frame.

Tip: Do not fully tighten any screw until all parts are aligned.

Care & Maintenance

• Fabric Upholstery: Vacuum regularly. Spot clean with mild soap and damp cloth. Do not soak.
• Wooden Parts: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners.
• Cushion: Fluff regularly to maintain shape. Cushion cover is not removable for washing.
• Frame: Check screw tightness every 3 months. Retighten if necessary.
• Storage: Store in dry place. Avoid direct sunlight to prevent fading.

Specifications

• Product Dimensions: 32" W x 35" D x 31" H (81cm x 89cm x 79cm).
• Seat Height: 18" (46cm) from floor.
• Seat Depth: 22" (56cm).
• Weight Capacity: 250 lbs (113 kg).
• Frame Material: Solid wood and engineered wood.
• Upholstery: Polyester fabric.
• Cushion Fill: High-resilience foam.
• Weight: 28 lbs (12.7 kg) assembled.
• Country of Origin: Designed in Sweden, made in Vietnam.

Usage Guidelines

Designed for indoor residential use only.

1. Sitting: Sit centered on cushion. Do not lean excessively to one side.
2. Moving: Lift chair to move; do not drag across floor.
3. Children: Supervise children. Do not allow climbing or jumping.
4. Placement: Place on level, solid floor. Use felt pads under legs on hardwood.

CAUTION! Do not use outdoors or in damp areas like bathrooms.

Disassembly & Moving

To disassemble for moving, reverse assembly steps.

1. Remove cushion and set aside.
2. Using Allen key, remove screws connecting armrests.
3. Remove backrest screws.
4. Separate side frames.
5. Unscrew legs from frame pieces.
6. Pack all parts in original packaging if available.

Note: Keep hardware in labeled bag. Take pictures during disassembly for easier reassembly.

Warranty Information

IKEA limited warranty. For details, see IKEA warranty card included with purchase or visit www.ikea.com.

Coverage: 10-year limited warranty on frame. 1-year warranty on upholstery under normal use.

Support: Contact IKEA customer service at 1-888-888-4532 or visit your local IKEA store.

Troubleshooting

Missing Parts? Contact IKEA for replacement parts: 1-888-888-4532.

Damage During Assembly? Stop assembly. Contact IKEA customer service.