IKEA KLIPSK 103.277.00 Bed Tray instructions manual

The IKEA KLIPSK 103.277.00 is a lightweight, portable bed tray designed for use in bed, on the sofa, or on the floor. It features a smooth, easy-to-clean surface, foldable legs for compact storage, and a raised edge to prevent items from sliding off. Below are key sections for safety, assembly, use, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Assembly Instructions 4. Specifications 5. Using Your Bed Tray 6. Folding & Storage 7. Care & Cleaning 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Main tray surface, Four foldable legs, Locking mechanism for legs.

FeatureDescription
Tray SurfaceSmooth, wipe-clean surface with raised edges
Foldable LegsFour legs that fold flat for easy storage
Locking MechanismSecures legs in open (use) or closed (storage) position
Portable DesignLightweight for easy carrying
Multi-UseFor bed, sofa, floor, or as a serving tray

Parts Included

Unpack and verify all parts are present before assembly.

  1. Main tray panel (1 piece)
  2. Foldable legs (4 pieces, pre-attached)
  3. Instruction manual (this document)

WARNING! Keep packaging materials away from children to avoid risk of suffocation.

Assembly Instructions

No tools required. Assembly takes less than 1 minute.

  1. Place the tray on a flat surface with the top facing up.
  2. Gently pull each leg away from the tray until you hear a click, indicating it is locked in the open position.
  3. Check that all four legs are fully extended and locked.
  4. Flip the tray over and ensure it sits stably on all legs.

CAUTION! Do not force the legs. If they do not lock easily, check for obstructions.

Specifications

Using Your Bed Tray

Place the assembled tray on a flat, stable surface.

  1. For use in bed: Position over legs. Ensure the surface underneath is flat.
  2. Place items (laptop, book, plate, cup) within the raised edges.
  3. Avoid placing excessively hot items directly on the surface; use a trivet or pad.
  4. Do not stand or sit on the tray.

Tip: The tray is ideal for breakfast in bed, working on a laptop, or holding crafts.

Folding & Storage

To fold the tray for storage:

  1. Lift the tray and press the locking button/release tab located near the hinge of each leg.
  2. While pressing, gently fold the leg flat against the underside of the tray.
  3. Repeat for all four legs.
  4. Store the folded tray vertically or under a bed/sofa.

WARNING! Keep fingers clear of hinges when folding to avoid pinching.

Care & Cleaning

Unplug any electronic devices before cleaning the tray.

  1. Wipe the surface with a soft, damp cloth. Use mild soap if needed.
  2. Dry immediately with a clean cloth.
  3. Do not immerse in water or use abrasive cleaners, scouring pads, or solvents.

CAUTION! Liquids can damage the particleboard core if left standing. Wipe spills promptly.

Safety Information

Read all instructions before use.

Warranty & Support

Refer to the IKEA warranty terms included with your purchase or available at IKEA stores. For product support, assembly help, or spare parts:

Troubleshooting

SymptomPossible CauseCorrective Action
Leg won't lock openObstruction or misalignmentCheck hinge area for debris. Fold leg closed, then reopen firmly until click.
Tray is wobblyLegs not fully locked or uneven surfaceEnsure all legs click into place. Use on a flat surface.
Leg won't fold for storageLocking mechanism engagedPress the release button/tab firmly while folding.
Stain on surfaceSpill not cleaned promptlyClean with damp cloth and mild soap. Avoid harsh chemicals.
Surface feels soft or damagedLiquid penetration or overloadingDo not exceed weight limit. Wipe spills immediately. Surface damage may not be repairable.

Note: This product does not contain electrical parts; no user-serviceable components inside.

Disposal: Dispose of according to local regulations for furniture/household goods. Recycle where possible.

IKEA KLIPSK 103.277.00 Bed Tray instructions manual © - All Rights Reserved 2025