IKEA KLINGSBO 601.285.62 Cabinet instructions manual

The IKEA KLINGSBO 601.285.62 is a versatile wall-mounted cabinet designed for storage in various rooms. It features a glass door, adjustable shelves, and a modern design. Below are key sections for safety, parts list, assembly instructions, mounting, care, and warranty information.

1. Parts and Hardware 2. Safety Information 3. Assembly Instructions 4. Mounting to Wall 5. Adjusting Shelves 6. Care and Maintenance 7. Specifications 8. Troubleshooting 9. Warranty Information

Parts and Hardware

Before assembly, check that you have all parts listed below.

Part Description	Quantity	Image Reference
Cabinet frame (main body)	1	A
Glass door with hinges	1	B
Adjustable shelves	2	C
Back panel	1	D
Wall mounting brackets	2	E
Screws for wall mounting	8	F
Cam locks and dowels	6	G
Door handle	1	H
Assembly tool (Allen key)	1	I

Note: All hardware is included in the package. Do not discard any parts before assembly is complete.

Safety Information

Read all instructions before assembly and use.

Weight Limit: Do not exceed 25 kg (55 lbs) total weight distributed across shelves.
Wall Mounting: Must be mounted to solid wall (studs or masonry). Do not mount to drywall alone.
Child Safety: Secure cabinet to wall to prevent tipping. Keep heavy items on lower shelves.
Glass Door: Handle with care. Do not slam or apply excessive pressure.
Tools: Use appropriate tools. Keep work area clean and well-lit.

WARNING! Failure to properly secure cabinet to wall can result in serious injury or damage.

Assembly Instructions

Follow steps in order. Allow approximately 30-45 minutes for assembly.

Prepare Workspace: Lay all parts on a soft, clean surface to avoid scratches.
Attach Back Panel: Align back panel (D) with pre-drilled holes on cabinet frame (A). Secure using cam locks (G).
Install Shelves: Insert shelf pins into side panels at desired height. Place shelves (C) onto pins.
Attach Door Hinges: Align hinges on glass door (B) with hinge plates on cabinet frame. Secure with provided screws.
Install Door Handle: Attach handle (H) to door using screws from inside of door.
Check Alignment: Open and close door to ensure smooth operation. Adjust hinges if necessary.

Tip: Do not fully tighten screws until all parts are aligned correctly.

Mounting to Wall

This is a critical step for safety. Cabinet must be securely mounted.

Locate Studs: Use a stud finder to locate solid wall studs. Mark positions.
Position Brackets: Hold wall mounting brackets (E) against wall at desired height (recommended 150 cm from floor). Mark screw holes.
Drill Pilot Holes: Drill holes at marked positions using appropriate drill bit for your wall type.
Secure Brackets: Attach brackets to wall using screws (F). Ensure they are level and firmly attached.
Hang Cabinet: With help from another person, lift cabinet and hook onto wall brackets. Ensure it clicks into place.
Final Check: Gently pull cabinet forward to confirm it is securely mounted.

CAUTION! Use two people for lifting and mounting. Do not mount above beds or seating areas.

Adjusting Shelves

Shelves can be adjusted to accommodate items of different heights.

Remove Items: Empty shelf before adjusting.
Lift and Remove: Gently lift shelf up and pull forward to remove from pins.
Reposition Pins: Remove shelf pins and insert into desired holes on side panels.
Replace Shelf: Place shelf back onto pins, ensuring it is level and secure.

Note: Distribute weight evenly. Do not overload adjustable shelves.

Care and Maintenance

Cleaning: Wipe cabinet with a soft, damp cloth. Dry immediately. For glass door, use glass cleaner and soft cloth.
Avoid: Abrasive cleaners, scouring pads, or harsh chemicals. Do not use excessive water.
Inspection: Periodically check wall mounting screws and brackets for tightness.
Environment: Keep away from excessive humidity, heat sources, and direct sunlight to prevent warping or fading.

CAUTION! Do not hang heavy objects on door or use shelves as steps.

Specifications

Attribute	Specification
Model Number	KLINGSBO 601.285.62
Dimensions (HxWxD)	80 cm x 60 cm x 30 cm (31.5" x 23.6" x 11.8")
Weight (empty)	15 kg (33 lbs)
Max Load Capacity	25 kg (55 lbs) total
Material	Particleboard, Fiberboard, Tempered Glass
Color/Finish	White/Glass
Door Type	Hinged glass door with handle
Shelf Type	2 x Adjustable shelves
Mounting	Wall-mounted (hardware included)

Troubleshooting

Issue	Possible Cause	Solution
Cabinet wobbles	Not mounted to studs; loose screws	Remount to solid wall studs; tighten all screws.
Door does not close properly	Hinges misaligned	Loosen hinge screws, adjust door position, retighten.
Shelf sags	Overloaded; pins not fully inserted	Reduce weight; ensure shelf pins are fully seated in holes.
Difficulty assembling parts	Parts misaligned	Check orientation of parts per manual; do not force.
Scratches on surface	Assembly on hard surface	Assemble on soft blanket or carpet to protect finish.

Note: For missing parts or damage, contact IKEA customer service with product number.

Warranty Information

IKEA limited warranty applies. This product is covered by a 10-year limited warranty against manufacturing defects under normal household use. Warranty does not cover damage from improper assembly, accident, modification, or commercial use. Proof of purchase is required.

For Support: Visit www.ikea.com or contact your local IKEA store. Have model number (601.285.62) ready.

Recycling: Dispose of packaging and product responsibly according to local regulations.