IKEA KLIMPFJÄLL 304.346.57 Table instructions manual

The IKEA KLIMPFJÄLL 304.346.57 is a versatile table designed for home or office use, featuring a sturdy construction with adjustable height settings, a smooth tabletop surface, and integrated cable management. Below are key sections for safety, assembly, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Assembly Instructions 4. Specifications 5. Controls and Adjustments 6. Setup and Leveling 7. Using the Table 8. Safety Features 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Tabletop, adjustable legs, cable management tray, height adjustment mechanism, leveling feet.

Feature	Description
Adjustable height	Manual or electric height adjustment (model dependent)
Cable management	Integrated tray and grommets for organized cables
Tabletop material	High-pressure laminate or veneer surface
Leg construction	Steel or powder-coated metal for stability
Leveling feet	Adjustable to compensate for uneven floors
Weight capacity	Supports up to 100 kg (220 lbs) evenly distributed
Finish options	Available in multiple colors (black, white, oak, etc.)
Assembly required	Tools included: Allen key, screws, instructions
Dimensions	Width: 120 cm, Depth: 60 cm, Height: adjustable 70-120 cm
Compatibility	Suitable for home office, study, or conference use

Package Contents

Unpack and verify all parts before assembly.

Tabletop (1 piece)
Legs (4 pieces)
Cross braces or frame (1 set)
Cable management tray (1 piece)
Hardware pack: screws, bolts, washers, Allen key
Leveling feet (4 pieces)
Instruction manual

WARNING! Tabletop is heavy; lift with care using two people. Check for damage upon unpacking.

Assembly Instructions

Follow steps in order; use provided tools.

Prepare workspace: Clear area, lay tabletop upside down on soft surface.
Attach legs: Align leg brackets with pre-drilled holes on tabletop underside.
Secure legs: Use provided screws and Allen key to tighten firmly.
Install cross braces: Connect between legs for added stability.
Attach cable tray: Mount under tabletop using screws.
Install leveling feet: Screw into bottom of each leg.
Flip table upright: Carefully turn table over with assistance.
Final check: Ensure all screws are tight and table is stable.

CAUTION! Do not overtighten screws; use two people for flipping table.

Specifications

Model: KLIMPFJÄLL 304.346.57
Tabletop Dimensions: 120 cm x 60 cm (47 ¼" x 23 ⅝")
Height Range: Adjustable 70-120 cm (27 ½" - 47 ¼")
Tabletop Thickness: 2.5 cm (1")
Material: Particleboard with laminate/veneer finish
Leg Material: Steel, powder-coated
Weight Capacity: 100 kg (220 lbs)
Net Weight: 25 kg (55 lbs)
Package Weight: 28 kg (62 lbs)
Color Options: Black-brown, white, oak veneer

Controls and Adjustments

Height adjustment: Manual crank or electric motor (if equipped). Leveling: Adjust feet for stability.

Manual adjustment: Insert crank into socket on leg, turn clockwise to raise, counterclockwise to lower.

Electric adjustment: Use up/down buttons on control panel (if model includes motor).

Leveling: Rotate feet individually to compensate for uneven floors. Cable management: Route cables through grommets into tray.

Setup and Leveling

Place table on flat surface; adjust feet as needed.

Position table in desired location.
Check stability: Gently rock table to identify unevenness.
Adjust feet: Turn clockwise to lower, counterclockwise to raise each foot.
Recheck stability: Table should not wobble.
Load evenly: Distribute weight across tabletop.

Tip: Use spirit level for precise leveling if available.

Using the Table

Designed for work, study, or dining.

Height adjustment: Adjust to ergonomic position (elbows at 90° when typing).
Cable management: Use grommets and tray to organize wires.
Surface protection: Use coasters for drinks; avoid direct heat.
Weight distribution: Do not exceed 100 kg; avoid placing heavy items on edges.
Movement: Lift to move; do not drag across floor.

WARNING! Do not stand or sit on table; not designed for climbing.

Safety Features

Sturdy construction: Steel legs and cross braces. Anti-tip design: Wide leg stance. Child safety: Rounded corners (on some models).

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Daily: Wipe with soft, damp cloth.

Stains: Use mild soap solution; dry immediately.

Scratches: Use touch-up pen (available separately) for minor damage.

CAUTION! Do not use ammonia, bleach, or abrasive pads; avoid excessive moisture.

Warranty Information

10-year limited warranty. Covers manufacturing defects in materials and workmanship. Does not cover damage from improper assembly, accidents, or normal wear. For warranty claims, contact IKEA customer service with proof of purchase. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table wobbles	Uneven floor or loose legs	Adjust leveling feet; tighten leg screws.
Height adjustment stiff	Debris in mechanism	Clean mechanism; lubricate if specified in manual.
Scratches on surface	Sharp objects or improper care	Use protective pads; apply touch-up pen.
Screws loose over time	Normal vibration/settling	Periodically check and tighten all screws.
Electric adjustment not working	Power connection or motor issue	Check power cord; reset if equipped; contact support.

Reassembly: If moving, disassemble in reverse order of assembly.

Service: Contact IKEA customer service or visit www.ikea.com for spare parts.