IKEA KLEPPSTAD 804.417.64 Wardrobe instructions manual

The IKEA KLEPPSTAD 804.417.64 is a versatile wardrobe system featuring a white finish, adjustable shelves, hanging rails, and sliding doors. It is designed for easy assembly with pre-drilled holes and cam lock fittings. The wardrobe offers flexible storage solutions for bedrooms, closets, or entryways. Below are key sections for safety, parts list, assembly instructions, installation, care, and troubleshooting.

1. Parts and Hardware 2. Safety Information 3. Assembly Instructions 4. Installation and Mounting 5. Adjusting and Configuring 6. Care and Maintenance 7. Specifications 8. Troubleshooting 9. Warranty and Support

Parts and Hardware

Key components: Wardrobe frame panels, sliding doors, shelves, hanging rails, cam locks, screws, dowels, wall attachment fittings.

Part Name	Description	Quantity
Side panels	Left and right wardrobe sides	2
Top panel	Upper frame piece	1
Bottom panel	Base frame piece	1
Back panel	Fiberboard backboard	1
Sliding doors	White sliding door panels	2
Shelves	Adjustable shelves	2-3
Hanging rail	Clothes hanging rod	1
Cam locks	Furniture connectors	8
Screws and dowels	Assembly hardware	As per pack
Wall attachment fittings	Anti-tip safety brackets	1 set

Safety Information

Read all instructions before assembly. Ensure proper handling and installation.

Assemble on a soft surface to avoid scratches.
Use two people for lifting and positioning.
Secure wardrobe to wall using provided fittings to prevent tipping.
Keep small hardware away from children.

WARNING! Heavy item; lift with care to avoid injury. Always secure to wall for stability.

Assembly Instructions

Follow step-by-step assembly guide. Estimated assembly time: 60-90 minutes.

Unpack and verify all parts against parts list.
Lay side panels flat and attach cam locks to pre-drilled holes.
Connect bottom panel to side panels using cam locks and tighten.
Attach top panel to complete frame rectangle.
Insert back panel into grooves and secure with provided screws.
Install hanging rail at desired height using screws.
Insert adjustable shelves onto shelf pins at preferred positions.
Attach sliding door rails to top and bottom of frame.
Mount doors onto rails and adjust rollers for smooth operation.
Secure wardrobe to wall using anti-tip brackets.

CAUTION! Do not overtighten screws. Ensure all connections are secure before use.

Installation and Mounting

Location: Place on even, solid floor. Avoid damp areas.
Wall Attachment: Must be secured to wall studs using provided brackets.
Clearance: Allow space for doors to slide fully open.
Leveling: Check with spirit level; adjust floor if uneven.

Tip: Use a stud finder to locate wall studs for secure mounting.

Adjusting and Configuring

Customize interior layout to suit storage needs.

Shelves: Move shelf pins to change shelf heights.
Hanging rail: Can be installed at multiple heights.
Doors: Adjust roller height using Allen key for smooth sliding.
Door alignment: Use adjustment screws on rollers to align doors.

For optimal use, distribute weight evenly across shelves and hanging rail.

Care and Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

Wipe spills immediately to prevent staining.
Dust regularly with soft, dry cloth.
Check door rollers periodically for smooth operation.
Tighten screws and fittings if loose over time.

CAUTION! Do not use harsh chemicals; avoid excessive moisture.

Specifications

Model: KLEPPSTAD 804.417.64
Color: White
Dimensions: Height: 200 cm, Width: 100 cm, Depth: 60 cm
Material: Particleboard, fiberboard, plastic fittings
Door Type: Sliding doors
Weight Capacity: Shelves: 15 kg each, Hanging rail: 30 kg
Tools Required: Phillips screwdriver, hammer, Allen key (included)
Warranty: Limited 10-year warranty (see terms)

Troubleshooting

Issue	Possible Cause	Solution
Doors not sliding smoothly	Misaligned rollers or dirty tracks	Adjust rollers with Allen key; clean tracks.
Wardrobe wobbles	Uneven floor or loose connections	Check level; tighten all cam locks and screws.
Shelves sagging	Overloaded or improperly seated	Reduce weight; ensure shelves are correctly on pins.
Gaps in frame	Cam locks not fully tightened	Turn cam locks 90° to lock position.
Difficult assembly	Incorrect part orientation	Refer to manual diagrams; ensure pre-drilled holes align.

Note: If parts are missing or damaged, contact IKEA customer service.

Warranty and Support

IKEA offers a limited 10-year warranty covering material and manufacturing defects. Warranty does not cover damage from improper assembly, accidents, or normal wear. For assistance:

Visit IKEA store or website: www.ikea.com
Customer service: 1-888-888-4532
Assembly service available in select areas.

Always retain receipt and product label for warranty claims.