IKEA KLÖVEN 504.505.28 Chair instructions manual

The IKEA KLÖVEN 504.505.28 is a modern, stackable chair designed for durability and comfort. It features a sturdy steel frame, a curved plywood seat and backrest, and a protective lacquer finish. Suitable for home, office, or commercial use. Below are key sections for safety, assembly, care, usage, and warranty information.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Proper Usage 7. Warranty & Support 8. Troubleshooting

Parts & Tools Included

Before assembly, verify all parts are present and undamaged.

Part Number	Description	Quantity
A	Steel frame (legs & back support)	1
B	Plywood seat	1
C	Plywood backrest	1
D	Plastic glides (foot caps)	4
E	Assembly screws (M6 x 25mm)	8
F	Allen key (4mm)	1
G	Instruction manual	1

Safety Information

Read all instructions before assembly and use.

Assemble on a clean, flat surface to avoid instability.
Use only the provided tools and hardware.
Do not exceed the maximum load capacity of 250 lbs (113 kg).
Ensure all screws are tightened securely before use.
Keep away from direct heat sources and excessive moisture.

WARNING! Improper assembly or overloading can cause injury or damage. Check tightness periodically.

Assembly Instructions

Estimated assembly time: 15-20 minutes.

Attach backrest: Align backrest (C) with pre-drilled holes on frame (A). Insert 4 screws (E) and tighten with Allen key (F).
Attach seat: Place seat (B) onto frame, aligning holes. Insert remaining 4 screws and tighten securely.
Install glides: Press plastic glides (D) onto the bottom of each leg until they click into place.
Final check: Ensure chair does not wobble. Re-tighten screws if necessary.

CAUTION! Do not overtighten screws, as this may strip the threads or damage the wood.

Specifications

Model: KLÖVEN 504.505.28
Dimensions (assembled): 18.1" W x 20.5" D x 31.5" H (46 x 52 x 80 cm)
Seat Height: 17.7" (45 cm)
Weight Capacity: 250 lbs (113 kg)
Frame Material: Powder-coated steel
Seat/Back Material: Molded plywood with clear lacquer finish
Foot Glides: Black plastic, floor-protective
Stackable: Yes, up to 6 chairs
Color: Black frame, Natural wood finish

Care & Maintenance

To maintain appearance and longevity:

Cleaning: Wipe with a soft, damp cloth. For stubborn stains, use mild soap solution. Dry immediately.
Avoid: Abrasive cleaners, solvents, or excessive water.
Protection: Keep away from direct sunlight to prevent fading. Avoid extreme humidity.
Inspection: Periodically check and tighten screws. Replace worn glides if necessary.

Tip: For stacked storage, ensure chairs are clean and dry to prevent sticking or marks.

Proper Usage

Designed for indoor use on level surfaces.

Sit centered on the seat; do not stand or kneel on the chair.
When stacking, lift chairs carefully—do not drag.
Use on flat, stable floors; glides protect against scratches.
Not recommended for outdoor or wet environments.

WARNING! Do not use if any part is damaged, loose, or missing. Contact IKEA for replacement parts.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Warranty Period: Varies by region; typically 10 years for frame, 1 year for finish.
Support: For missing parts, damage, or questions, contact IKEA Customer Service.
Website: www.ikea.com
Phone: 1-800-434-4532 (US)

Note: Keep your receipt as proof of purchase for warranty claims.

Troubleshooting

Issue	Possible Cause	Solution
Chair wobbles	Loose screws or uneven floor	Tighten all screws with Allen key. Place on level surface.
Difficulty assembling	Misaligned holes	Ensure parts are oriented correctly as shown in diagrams.
Scratches on floor	Missing or damaged glides	Check glides are installed. Replace if worn (contact IKEA).
Squeaking noise	Friction between parts	Tighten screws. Apply a small amount of furniture wax to joints if needed.
Finish discoloration	Sun exposure or chemical spill	Clean gently. Avoid direct sunlight and harsh cleaners.

Replacement Parts: Contact IKEA with model number (504.505.28) and part needed.

Disposal: Disassemble for recycling. Separate materials (metal, wood, plastic) according to local regulations.