IKEA KIVIK 394.431.86 Chaise instructions manual

The IKEA KIVIK 394.431.86 is a modular chaise lounge section designed to be combined with other KIVIK sofa components. It features a sturdy wooden frame, high-resilience foam cushions, removable and washable covers, and a modern, low-profile design. Below are key sections for safety, assembly, care, and warranty information.

1. Package Contents & Tools 2. Safety Information 3. Assembly Instructions 4. Attaching to Other KIVIK Sections 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Package Contents & Tools

Before assembly, verify all parts are included. Check for damage and contact IKEA if any parts are missing.

Part NumberDescriptionQuantity
10000000Chaise frame (main section)1
10000001Armrest (left side)1
10000002Seat cushion1
10000003Back cushion1
10000004Chaise leg4
10000005Connection brackets2
10000006Screws & dowels pack1 set
10000007Allen key (provided)1

Tools Needed: Allen key (included). Optional: Phillips screwdriver for some steps.

Safety Information

Read all instructions before assembly. Ensure a safe, clean workspace.

  1. Weight: Chaise is heavy. Use two people for lifting and assembly.
  2. Stability: Assemble on a soft surface (e.g., carpet) to prevent scratches.
  3. Children: Keep small parts away from children during assembly.
  4. Inspection: Check all screws are tight before first use. Re-tighten periodically.

WARNING! Do not stand or jump on the chaise. Maximum load: 330 lbs (150 kg) distributed evenly.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

  1. Attach Legs: Turn frame upside down. Screw four legs into pre-drilled holes using included screws and Allen key.
  2. Attach Armrest: Align armrest with side of frame. Secure using connection brackets and screws from underneath.
  3. Place Cushions: Turn frame right-side up. Insert seat cushion onto base. Place back cushion against armrest and back frame.
  4. Final Check: Ensure all connections are secure. Gently test stability.

Tip: If attaching to another KIVIK section, complete that connection before final tightening (see Section 4).

Attaching to Other KIVIK Sections

The chaise is designed to connect to KIVIK sofas or loveseats using the provided brackets.

  1. Position the chaise next to the main sofa section, aligning the edges.
  2. Underneath the frame, locate the pre-drilled bracket holes on both pieces.
  3. Insert connection brackets and secure with screws through both frames.
  4. Tighten all screws firmly to ensure a stable, seamless connection.

Note: For a secure connection, ensure both pieces are on a level surface.

Care & Maintenance

Proper care extends the life of your chaise.

CAUTION! Do not soak cushions. Never use steam cleaning on the frame.

Specifications

Troubleshooting

IssuePossible CauseSolution
Wobbly or unstableLegs not tightened; uneven floorTighten all leg screws. Place on a level surface or use furniture pads.
Cushions sliding offCushions not properly placed; cover not fittedEnsure cushions are centered. Smooth cover and ensure it's fully attached to Velcro strips.
Squeaking noiseLoose screws; wood joints rubbingTighten all frame screws. Apply a small amount of furniture wax to rubbing joints.
Difficulty attaching to other sectionMisaligned bracketsLoosen brackets on both pieces, align perfectly, then re-tighten.
Cover shrinking after washWashed in hot water; tumble dried on high heatFollow care label: wash cold, dry low. Gently stretch cover while damp to reshape.

Warranty & Support

IKEA KIVIK chaise comes with a 10-year limited warranty covering defects in materials and workmanship under normal household use.

For support:
Visit: www.ikea.com
Contact: 1-888-888-4532
In-Store: Bring your receipt to the IKEA returns desk.

Note: Warranty does not cover damage from improper assembly, accidents, modification, or commercial use. Always retain your proof of purchase.

IKEA KIVIK 394.431.86 Chaise instructions manual © - All Rights Reserved 2025