IKEA KINNAHULT 704.884.22 Table Lamp instructions manual

The IKEA KINNAHULT 704.884.22 is a modern table lamp featuring a metal shade and base, designed for use with a maximum 7W LED bulb (E14 socket, not included). It includes an in-line on/off switch on the power cord. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Included 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Placement & Usage 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Metal shade, metal base, E14 bulb socket, power cord with in-line switch.

Feature	Description
Material	Metal shade and base
Bulb Socket	E14 (small screw base)
Max. Wattage	7W LED (equivalent to 60W incandescent)
Power Cord	With integrated on/off switch
Dimensions	Height: Approx. 32 cm / 12.6 inches
Design	Modern, minimalist style
Assembly	Tool-free, simple connection
Intended Use	Indoor table or desk lamp

Parts & Tools Included

Unpack and verify all parts are present before assembly.

Metal lamp base (1 piece)
Metal lamp shade (1 piece)
E14 bulb socket assembly with pre-attached cord (1 set)
Instruction manual (this sheet)

Note: Light bulb and any necessary tools are NOT included.

Assembly Instructions

Ensure the lamp is unplugged during assembly.

Place the metal base on a stable, flat surface.
Take the socket assembly. Thread the power cord through the central hole in the metal base from the bottom up.
Pull the cord through until the socket rests securely on top of the base.
Align the metal shade over the socket. Gently press down until it clicks or sits firmly on the base. Ensure it is straight.
Insert a suitable LED bulb (max 7W, E14 base) into the socket by turning it clockwise. Do not overtighten.
Plug the power cord into a standard wall outlet.

WARNING! Do not use a bulb exceeding the maximum wattage. Ensure all parts are securely connected.

Specifications

Product Name: KINNAHULT
Article Number: 704.884.22
Main Material: Steel, Epoxy/polyester powder coating
Socket Type: E14
Max Power: 7W LED
Voltage: 120V AC, 60Hz (for North America)
Cord Length: Approx. 1.8 m / 71 inches
Product Dimensions: Height: 32 cm, Diameter: 18 cm
Weight: Approx. 1.2 kg

Operation & Controls

The lamp is operated via the in-line switch on the power cord.

To Turn On: Press the switch to the "|" (ON) position. The lamp will illuminate if a working bulb is installed and the lamp is plugged in.

To Turn Off: Press the switch to the "O" (OFF) position.

Tip: For energy savings and safety, turn off and unplug the lamp when not in use for extended periods.

Bulb Replacement

Always allow the bulb to cool before handling.

Ensure the lamp is turned OFF and unplugged from the wall outlet.
Let the existing bulb cool down completely if it was recently on.
Grip the bulb firmly but gently. Turn it counterclockwise to unscrew it from the E14 socket.
Take a new LED bulb (max 7W, E14 base). Align it with the socket and turn it clockwise until snug. Do not force it.
Plug the lamp back in and turn it on to test the new bulb.

CAUTION! Use only LED bulbs with an E14 base, rated for 7W or less. Using a higher wattage bulb may cause overheating and damage.

Placement & Usage

Designed for stable, level indoor surfaces such as bedside tables, desks, or shelves.

Place the lamp on a dry, stable, and heat-resistant surface.
Keep the lamp away from edges where it could be knocked over.
Ensure the power cord is not pinched, frayed, or placed under carpets or heavy furniture.
Do not place the lamp in direct sunlight, near open flames, or in excessively humid areas (e.g., bathrooms).

Tip: Position the lamp to provide focused task lighting or ambient room lighting.

Safety Information

Read all safety instructions before use.

ELECTRICAL SAFETY: This lamp is for indoor use only. Connect only to 120V AC, 60Hz power supply.
BULB: Use only LED bulbs, maximum 7W, E14 base. Incandescent or halogen bulbs may generate excessive heat.
OVERHEATING: Do not cover the lamp or shade with cloth, paper, or any material that could trap heat.
CHILDREN: Keep out of reach of young children. The cord may pose a strangulation hazard.
INSPECTION: Regularly check the cord, plug, and socket for damage. Do not use if damaged.

WARNING! RISK OF FIRE OR ELECTRIC SHOCK. If the lamp malfunctions, emits a burning smell, or the cord becomes hot, unplug it immediately and discontinue use.

Care & Cleaning

Always unplug the lamp and let it cool completely before cleaning.

Use a soft, dry or slightly damp cloth to wipe the metal shade and base.
For tougher marks, use a mild soap solution on the cloth. Do not immerse any part of the lamp in water.
Wipe dry immediately with a clean, soft cloth.
Never use abrasive cleaners, scouring pads, solvents, or chemical sprays.

CAUTION! Do not allow moisture to enter the socket or electrical parts. Never spray cleaner directly onto the lamp.

Warranty & Support

Refer to the IKEA warranty terms provided at the time of purchase or on the IKEA website. This product is designed and intended for household use only under normal conditions.

For product support, spare parts, or more information:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (704.884.22) and your receipt ready.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check wall outlet; try a different bulb; ensure plug is fully inserted and switch is ON.
Lamp flickers	Loose bulb / Faulty bulb / Poor socket contact	Turn off, unplug, and ensure bulb is screwed in tightly. Try a new bulb.
Lamp gets very hot	Wrong bulb type/wattage / Covered vent	Use only a max 7W LED bulb. Ensure shade is not covered and lamp has ventilation.
Shade is loose or wobbly	Not fully seated on base	Turn off and unplug. Press shade down firmly onto base until it sits securely.
Switch does not work	Damaged switch or cord	Discontinue use. Do not attempt to repair the cord yourself. Contact IKEA for support.

Disposal: At end of life, dispose of according to local regulations for electronic waste. Do not dispose of with household trash.