IKEA KINNAHULT 404.884.14 Floor Lamp instructions manual

The IKEA KINNAHULT 404.884.14 is a modern floor lamp featuring a sleek metal frame, adjustable height, fabric shade, and energy-efficient LED light source. Designed for easy assembly and versatile placement in living rooms, bedrooms, or offices. Below are key sections for safety, parts included, assembly instructions, operation, care, and troubleshooting.

1. Parts Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Lamp Adjustment 7. Bulb Replacement 8. Care & Cleaning 9. Warranty Information 10. Troubleshooting

Parts Included

Check that all parts are present before starting assembly.

Part Number	Description	Quantity
A	Base plate	1
B	Main pole section	1
C	Extension pole	1
D	Lamp head with socket	1
E	Fabric shade	1
F	Mounting screws	4
G	Allen key	1
H	LED bulb (E26 base, 9W)	1

Safety Information

Read all safety instructions before assembly and use.

Ensure the lamp is placed on a stable, level surface to prevent tipping.
Use only the included LED bulb or a compatible E26 base bulb with max 13W.
Disconnect from power before assembly, cleaning, or bulb replacement.
Keep away from water, moisture, and heat sources.
Do not exceed the recommended wattage to avoid overheating.

WARNING! Risk of electric shock. Do not disassemble the lamp beyond instructed steps. Keep out of reach of children.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools needed: Allen key (included).

Attach base: Place base plate (A) on floor. Insert main pole (B) into base and secure with 2 screws using Allen key.
Add extension: Slide extension pole (C) onto main pole. Align holes and secure with provided screw.
Install lamp head: Attach lamp head (D) to top of extension pole. Tighten locking ring by hand.
Attach shade: Place fabric shade (E) over lamp head. Ensure it sits securely on the rim.
Insert bulb: Screw the included LED bulb (H) into the socket. Do not overtighten.
Final check: Ensure all connections are tight and lamp stands upright without wobbling.

CAUTION! Do not force parts. If something doesn't fit, check orientation and try again.

Specifications

Model: KINNAHULT 404.884.14
Height: Adjustable from 48" to 60" (122-152 cm)
Base Diameter: 9.8" (25 cm)
Shade Material: Polyester fabric
Frame Material: Powder-coated steel
Bulb Type: E26 base, LED included (9W, 800 lumens, 3000K warm white)
Max Wattage: 13W
Power Supply: 120V AC, 60Hz
Weight: 5.5 lbs (2.5 kg)

Operation & Controls

The lamp features a foot switch for easy operation.

Foot Switch: Located on the power cord near the base. Press once to turn on, press again to turn off.

Adjustment: Height can be adjusted by loosening the locking screw on the extension pole, sliding to desired height, and retightening.

Shade Orientation: The shade can be rotated slightly to direct light. Do not force beyond its natural movement.

Lamp Adjustment

To adjust the lamp height:

Loosen the locking screw on the extension pole using the Allen key.
Gently slide the extension pole up or down to desired height.
Ensure the lamp head remains level.
Tighten the locking screw firmly.
Check stability by gently pushing the lamp from the side.

Tip: For reading or task lighting, position the lamp so the bottom of the shade is at eye level when seated.

Bulb Replacement

Replace bulb only with lamp unplugged and bulb cooled.

Unplug the lamp from the electrical outlet.
Allow existing bulb to cool completely if recently used.
Gently press fabric shade upward to access bulb.
Unscrew old bulb counterclockwise.
Screw new bulb clockwise into socket. Use only E26 base, max 13W LED or CFL.
Reposition shade securely.
Plug in and test.

WARNING! Do not use incandescent bulbs over 13W as they may overheat the shade and socket.

Care & Cleaning

Unplug before cleaning.

Fabric shade: Use a soft brush or vacuum with brush attachment to remove dust. Do not wash.
Metal frame: Wipe with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately.
Base: Clean with dry cloth. Avoid abrasive cleaners.

CAUTION! Do not immerse any part in water. Do not use chemical cleaners on fabric shade.

Warranty Information

IKEA limited warranty: 1 year from date of purchase for manufacturing defects. Warranty covers replacement of defective parts or product exchange with receipt. Does not cover damage from improper assembly, misuse, accidents, or normal wear. For warranty service, contact IKEA customer service with receipt and product information.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp doesn't turn on	Not plugged in / Bulb faulty / Foot switch issue	Check power outlet; try another bulb; ensure foot switch is pressed firmly.
Lamp wobbles	Base not secure / Floor uneven	Tighten base screws; place on level surface; adjust floor glides if available.
Light flickers	Loose bulb / Faulty bulb	Turn off, unplug, and reseat bulb; replace with known working bulb.
Shade uneven	Not seated properly	Gently rotate shade until it sits evenly on the rim.
Height adjustment stuck	Locking screw too tight	Loosen screw slightly, adjust height, then retighten.

For Support: Contact IKEA customer service at 1-888-888-4532 or visit www.ikea-usa.com.