IKEA KILSVIKEN 393.370.15 Sink instructions manual

The IKEA KILSVIKEN 393.370.15 is a stainless steel double bowl kitchen sink designed for durability and easy cleaning. It features a 50/50 bowl configuration, integrated drainer grooves, sound-absorbing undercoating, and is compatible with most standard kitchen faucets and accessories. Below are key sections for safety, features, installation, care, and warranty information.

Features at a Glance

Key components: Stainless steel double bowl sink, sound-absorbing undercoating, drainer grooves, pre-cut faucet holes, mounting clips, and template.

Safety Information

Read all instructions before installation. Ensure proper support and secure mounting.

1. Always wear safety glasses and gloves during installation.
2. Ensure countertop cutout matches template dimensions exactly.
3. Verify cabinet structure can support sink weight (sink + water + dishes).
4. Turn off water supply before connecting plumbing.
5. Use only silicone sealant rated for kitchen sinks.

WARNING! Sink edges are sharp; handle with care. Do not stand or sit in sink. Ensure proper ventilation when using sealants.

Package Contents

Unpack and verify all components are present.

• 1 x KILSVIKEN stainless steel sink
• 1 x Installation template
• 6 x Mounting clips
• 6 x Clip screws
• 1 x Instruction manual
• 2 x Drain strainers (optional, check local market)

CAUTION! Inspect sink for damage before installation. Contact IKEA if any parts are missing or damaged.

Specifications

• Model: KILSVIKEN 393.370.15
• Overall Dimensions: 33" x 22" (84 cm x 56 cm)
• Bowl Depth: 8" (20 cm) each
• Bowl Dimensions: 14" x 16" each (35.5 cm x 40.5 cm)
• Material Thickness: 18-gauge (1.0 mm)
• Cutout Dimensions: 32-1/2" x 21-1/2" (82.5 cm x 54.5 cm)
• Weight: 24 lbs (11 kg)
• Faucet Hole Size: 1-3/8" standard (35 mm)
• Maximum Water Temperature: 212°F (100°C)
• Warranty: 25-year limited warranty against rust-through

Tools Required

Gather these tools before starting installation:

1. Jigsaw or router with cutting bit
2. Drill with 1/4" drill bit
3. Screwdriver (Phillips #2)
4. Adjustable wrench
5. Silicone sealant gun
6. Tape measure
7. Pencil
8. Safety glasses and gloves
9. Level
10. Clamps (optional)

Tip: Use sharp blades for clean cutouts. Dull blades may damage countertop.

Installation Instructions

Follow these steps for proper sink installation.

1. Prepare countertop: Place template on countertop, align with cabinet. Secure with tape.
2. Mark cutout: Trace template outline with pencil. Double-check measurements.
3. Drill starter holes: Drill 1/4" holes at each inside corner of marked outline.
4. Cut opening: Using jigsaw, cut along marked lines. Keep blade perpendicular.
5. Test fit: Place sink in opening without sealant. Ensure even gap (1/8") all around.
6. Apply sealant: Run bead of silicone sealant along underside of sink rim.
7. Position sink: Carefully lower sink into opening. Press firmly to create seal.
8. Install clips: Attach mounting clips to sink ledge. Tighten screws until snug (do not overtighten).
9. Clean excess: Wipe away excess sealant with damp cloth immediately.
10. Cure time: Allow 24 hours for sealant to fully cure before using sink.

WARNING! Do not overtighten mounting clips. This can warp sink and break seal.

Connecting Plumbing

Connect drain and water supply lines after sink is secured.

1. Install drain strainers: Insert into drain openings, tighten from below.
2. Connect P-trap: Attach to drain tailpiece, align with wall drain.
3. Connect water supply: Attach flexible supply lines to faucet, then to shut-off valves.
4. Check for leaks: Turn on water slowly, inspect all connections.
5. Install optional accessories: Soap dispenser, side spray, etc. if applicable.

Tip: Use plumber's tape on all threaded connections. Hand-tighten first, then 1/4 turn with wrench.

Sealing & Water Testing

Proper sealing prevents water damage to cabinet.

1. After installation, fill both bowls with water to rim.
2. Let stand for 15 minutes while checking underside for leaks.
3. Drain water and inspect seal around rim for gaps.
4. If leaks appear, drain sink completely, dry area, and apply additional sealant.
5. Re-test after 24 hours cure time.

CAUTION! Do not use sink until sealant is fully cured (24 hours).

Care & Cleaning

Proper maintenance extends sink life and maintains appearance.

• Daily cleaning: Use mild dish soap and warm water. Rinse thoroughly.
• Stain removal: Use baking soda paste or stainless steel cleaner. Wipe with grain.
• Mineral deposits: Remove with vinegar solution (1:1 water/vinegar).
• Avoid: Abrasive cleaners, steel wool, bleach, or acidic cleaners.
• Prevent scratches: Use sink grid or mat. Don't cut directly on surface.
• Water spots: Dry with soft cloth after each use to prevent spots.

WARNING! Never use chlorine bleach or oven cleaners. These damage stainless steel.

Warranty Information

IKEA warrants this sink against rust-through for 25 years from date of purchase under normal household use. Warranty covers manufacturing defects in material or workmanship. Does not cover damage from improper installation, accident, misuse, commercial use, or lack of maintenance. For warranty service, contact IKEA customer service with proof of purchase.

Contact: IKEA Customer Service: 1-888-888-4532 or visit www.ikea-usa.com

Troubleshooting

Professional Help: If problems persist, contact professional plumber or IKEA service.

IKEA Support: 1-888-888-4532; www.ikea-usa.com