IKEA KARMSUND 605.072.61 Mirror instructions manual

The IKEA KARMSUND 605.072.61 is a wall-mounted mirror designed for bathroom or hallway use, featuring a rectangular shape with a black frame, safety backing, and included mounting hardware. Below are key sections for safety, assembly, installation, care, and warranty information.

1. Product Overview 2. Safety Instructions 3. Included Parts 4. Tools Required 5. Assembly Instructions 6. Wall Mounting 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Product Overview

The KARMSUND mirror features a classic rectangular design with a durable black finish frame, tempered glass for safety, and pre-attached hanging hardware for easy installation.

Feature	Description
Frame Material	Steel with black powder-coated finish
Mirror Type	Tempered safety glass with protective backing
Mounting Type	Wall-mounted with keyhole slots
Intended Use	Indoor use in bathrooms, hallways, bedrooms
Weight Capacity	Supports mirror weight only; not for additional items

Safety Instructions

Read all instructions before assembly and installation.

Use only for intended purpose as a wall mirror.
Ensure wall structure can support mirror weight.
Keep away from direct heat sources and excessive moisture.
Do not hang items on the mirror frame.
Keep packaging materials away from children.

WARNING! Mirror is heavy; use two people for handling and installation to prevent injury or damage.

Included Parts

Check that all parts are present before starting.

Mirror: 1 unit with pre-attached hanging brackets
Wall anchors: 4 pieces (size: appropriate for drywall/plaster)
Screws: 4 pieces (compatible with wall anchors)
Template: 1 paper guide for wall marking
Instruction manual: This document

Note: If any parts are missing, contact IKEA customer service.

Tools Required

Tools not included; prepare before installation.

Pencil
Tape measure
Level
Electric drill with appropriate drill bit
Screwdriver (Phillips head)
Stud finder (recommended for secure mounting)

Assembly Instructions

The mirror comes fully assembled; no additional assembly required.

Unpack mirror carefully, removing all protective packaging.
Inspect for any damage during shipping.
Place mirror on soft surface (e.g., carpet or blanket) to avoid scratches.
Verify that hanging brackets are securely attached to back of mirror.

CAUTION! Handle mirror with care; avoid placing pressure on glass surface.

Wall Mounting

Follow these steps for secure installation.

Decide mounting location; ensure wall is flat and sturdy.
Use template: Align template on wall at desired height; mark screw holes with pencil.
Drill holes: Use drill bit slightly smaller than wall anchors; drill at marked points.
Insert wall anchors: Tap anchors gently into holes until flush with wall.
Mount mirror: With help, lift mirror and align keyhole slots over screw heads; lower into place.
Secure: Tighten screws into anchors, leaving slight gap for keyhole slots.
Check level: Use level to ensure mirror is straight; adjust if necessary.

Tip: For plaster or concrete walls, use appropriate anchors; consult hardware store if unsure.

Care & Maintenance

Proper care ensures long-lasting appearance.

Clean glass with soft, lint-free cloth and mild glass cleaner.
Avoid abrasive cleaners or scouring pads.
Wipe frame with damp cloth; dry immediately.
Do not use harsh chemicals on frame finish.

CAUTION! Never spray cleaner directly on mirror; apply to cloth first to prevent liquid seepage behind frame.

Specifications

Model: KARMSUND 605.072.61
Dimensions: Height: 60 cm, Width: 40 cm, Depth: 2.5 cm
Weight: Approximately 5 kg
Frame Color: Black
Glass: Tempered safety glass
Mounting Hardware Included: Yes (screws and wall anchors)
Warranty: Limited 1-year warranty

Troubleshooting

Issue	Possible Cause	Solution
Mirror not level	Uneven wall or incorrect mounting	Loosen screws slightly, adjust mirror, retighten; use level.
Mirror feels loose	Screws not tightened properly	Ensure screws are secure in wall anchors; check anchor installation.
Frame scratches during installation	Rough handling or contact with hard surfaces	Place protective padding during installation; avoid dragging.
Glass appears cloudy	Residue from packaging or cleaning product	Clean with vinegar solution (50/50 water and vinegar) and soft cloth.
Wall anchors not holding	Wrong anchor type for wall material	Remove and install correct anchors for your wall type (e.g., toggle bolts for drywall).

Warranty & Support

This product is covered by a limited 1-year warranty against manufacturing defects. Warranty does not cover damage from improper installation, accidents, or normal wear.

For support, contact IKEA customer service:

Phone: 1-888-888-4532
Website: www.ikea.com
Visit your local IKEA store for assistance.

Note: Keep your receipt as proof of purchase for warranty claims.