IKEA KARLJAN 104.175.26 Chair instructions manual

The IKEA KARLJAN 104.175.26 is a modern, sturdy chair designed for dining or office use. It features a durable metal frame, a comfortable padded seat, and a supportive backrest. The chair is easy to assemble with included tools and hardware. Below are key sections for safety, parts list, step-by-step assembly, care instructions, and warranty information.

Parts & Hardware

Before assembly, verify all parts are present. Check packaging for small hardware bag.

NOTE: Keep packaging until assembly is complete in case parts need to be returned.

Safety Instructions

Read all instructions before assembly. Ensure a clean, spacious work area.

1. Adult Assembly: This product requires assembly. Assemble only by adults.
2. Stable Surface: Place chair on a flat, stable surface during assembly and use.
3. Tool Use: Use only the provided hex key. Do not overtighten screws.
4. Weight Limit: Maximum load: 250 lbs (113 kg). Do not stand on the chair.
5. Inspect: Check all parts for damage before assembly. Do not use if parts are damaged or missing.

WARNING! Failure to follow instructions may result in injury or product damage. Keep small parts away from children.

Assembly Steps

Estimated assembly time: 15-20 minutes. Follow steps in order.

1. Attach Legs to Frame: If legs are separate, insert metal legs (C) into the frame base. Ensure they click into place.
2. Install Plastic Glides: Press plastic glides (D) onto the bottom of each metal leg until secure.
3. Attach Seat to Backrest: Align the seat (B) with the pre-drilled holes on the backrest (A).
4. Secure with Screws: Insert screws (F) through washers (G) and into the aligned holes. Tighten using the hex key (E) until firm but do not strip threads.
5. Attach Seat/Backrest Unit to Frame: Place the assembled seat and backrest onto the metal leg frame (C). Align the mounting holes.
6. Final Screws: Insert and tighten the remaining screws through the frame into the seat base.
7. Final Check: Gently rock the chair to ensure all connections are tight and stable.

Tip: Assemble the chair upside down on a soft surface (like a carpet) to prevent scratching.

Care & Maintenance

Proper care will extend the life of your chair.

• Fabric/Upholstery: Vacuum regularly. Clean spills immediately with a damp cloth and mild soap. Do not soak.
• Metal Frame: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
• Plastic Glides: Check periodically for wear. Replace if cracked or missing to protect floors.
• Tighten Screws: Check screw tightness every few months and retighten if necessary.

CAUTION! Do not use bleach, harsh chemicals, or steam cleaners. Keep away from direct heat sources.

Specifications

• Product Dimensions: Height: 33" (84 cm), Width: 20" (51 cm), Depth: 22" (56 cm).
• Seat Height: 18" (46 cm) from floor.
• Weight Capacity: 250 lbs (113 kg).
• Frame Material: Powder-coated steel.
• Seat Material: Padded foam with polyester fabric cover (model dependent).
• Foot Glides: Black plastic, floor-protecting.
• Packaged Weight: Approx. 15 lbs (6.8 kg).

Adjustments

This is a fixed-height dining/office chair. No mechanical adjustments are available.

Comfort Tip: For added comfort, use a separate cushion or pillow. Ensure it does not obstruct stability.

Troubleshooting

Missing Parts? Contact IKEA customer service with your product number (104.175.26).

Warranty & Support

IKEA products come with a limited warranty. Refer to the IKEA warranty booklet included in packaging or available online for full terms.

• Warranty Period: Varies by region. Typically 1-10 years for different components (frame, fabric).
• Support: For assembly help, missing parts, or product questions:
  Visit: www.ikea.com
  Contact your local IKEA store.
  Use the IKEA app for assembly guides.

© Inter IKEA Systems B.V. 2025. KARLJAN is a trademark of IKEA.