IKEA KALLBLIXT 904.980.00 Wall Lamp instructions manual

The IKEA KALLBLIXT 904.980.00 is a modern wall lamp featuring a minimalist design with a white plastic shade, integrated LED light source, and adjustable arm. It provides direct and indirect lighting, is designed for indoor use, and requires installation on a wall with standard electrical wiring. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation & Adjustments 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: White plastic shade, adjustable arm, integrated non-replaceable LED module, wall mounting bracket, and built-in switch.

Feature	Description
Shade	White plastic, diffuses light evenly
Light Source	Integrated LED, non-replaceable
Arm	Adjustable for directing light
Mounting Bracket	For secure wall attachment
Switch	Built-in on/off switch on lamp body
Power Input	For connection to mains electricity
Light Output	Warm white light, suitable for ambient lighting
Design	Minimalist, modern style
Intended Use	Indoor wall mounting only
IP Rating	IP20 - for dry indoor locations

Installation

Unpack and inspect contents. Ensure you have the correct tools and wall type.

Turn off power: Switch off electricity at the circuit breaker for the installation area.
Mark mounting points: Use the bracket as a template to mark screw holes on the wall.
Drill holes: Use appropriate drill bit for your wall type (plasterboard, brick, etc.).
Mount bracket: Secure the mounting bracket to the wall using provided screws and wall plugs.
Connect wires: Connect lamp wires to household wiring (Live, Neutral, Earth) following local electrical codes.
Attach lamp: Secure the lamp to the mounted bracket.
Restore power: Turn electricity back on at the circuit breaker.

WARNING! Installation must be performed by a qualified electrician. Ensure power is off before beginning work.

First-Time Setup

After installation, test the lamp and make initial adjustments.

Test operation: Turn on the lamp using the built-in switch.
Adjust arm: Position the adjustable arm to direct light as desired.
Check stability: Ensure the lamp is securely mounted and does not wobble.
Verify light output: Confirm the LED is functioning correctly with consistent brightness.

CAUTION! Do not touch the LED module directly. Handle the lamp by its shade or arm only.

Specifications

Model: KALLBLIXT 904.980.00
Light Source: Integrated LED, non-replaceable
Power Consumption: 5W
Luminous Flux: 400 lumens
Color Temperature: 2700K (Warm White)
CRI (Color Rendering Index): >80
Input Voltage: 220-240V AC, 50/60Hz
Dimensions: Height: 30cm, Width: 15cm, Depth: 20cm (extended)
Material: Shade: Plastic, Arm: Metal with plastic coating
Weight: 0.8kg
IP Rating: IP20 (Indoor use only)
Lifespan: 25,000 hours

Controls and Settings

This lamp features a simple on/off switch located on the lamp body. The arm is adjustable to direct light upward or downward.

Switch: Press to turn ON/OFF. No dimming function is available.

Arm Adjustment: Gently move the arm to desired position. The joint allows for smooth movement.

Note: The LED light source is not dimmable and cannot be replaced separately.

Connecting to Power

The lamp must be connected to standard household electrical wiring.

Ensure power is turned OFF at the circuit breaker.
Connect the lamp wires: Brown (Live) to Live, Blue (Neutral) to Neutral, Green/Yellow (Earth) to Earth.
Use appropriate wire connectors and ensure no bare wires are exposed.
Follow all local electrical regulations and codes.

Tip: If unsure about wiring, consult a qualified electrician. Never attempt electrical work without proper knowledge.

Operation & Adjustments

Daily use and positioning of the lamp.

Turning on/off: Use the built-in switch on the lamp body.
Adjusting direction: Gently move the arm to direct light where needed.
Optimal positioning: For reading, direct light downward. For ambient lighting, position upward.
Energy saving: Turn off when not in use to maximize LED lifespan.

WARNING! Do not force the arm beyond its natural movement range. Adjust gently to avoid damage.

Safety Features

Built-in electrical insulation, thermal protection, and secure mounting system.

Electrical Safety: Double insulation design, no need for earth connection if installed correctly.

Thermal Protection: LED driver includes over-temperature protection.

Mounting Security: Bracket designed to support lamp weight safely.

Care & Cleaning

Turn off and unplug (if applicable) before cleaning. Use dry or slightly damp cloth only.

Dust regularly with a soft, dry cloth.
For stains, use a cloth dampened with water only. Do not use cleaning chemicals.
Never immerse the lamp in water or other liquids.
Do not use abrasive cleaners or scouring pads.

CAUTION! Never spray liquids directly onto the lamp. Ensure lamp is completely dry before use.

Regulatory Information

CE marked: Complies with European Low Voltage and EMC directives. RoHS compliant: Contains no hazardous substances above permitted limits. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power supply/switch	Check circuit breaker; ensure switch is ON; verify wiring connections.
Light flickers	Loose connection	Check all electrical connections; ensure wires are securely connected.
Arm is stiff or stuck	Dust accumulation	Gently clean joint area with dry cloth; do not force movement.
Light output dim	End of life	LED may be near end of lifespan; consider replacement of entire unit.
Lamp feels hot	Normal operation/Ventilation	LEDs generate some heat; ensure adequate ventilation around lamp.

Note: The integrated LED cannot be replaced separately. If LED fails, the entire lamp needs replacement.

Service: Contact IKEA customer service or visit www.ikea.com for assistance.