IKEA KALLAX 094.426.16 Base instructions manual

The IKEA KALLAX 094.426.16 Base is a foundational support unit designed for use with KALLAX shelving units. It provides stability and elevation, helping to protect your furniture from floor moisture and creating a more accessible storage height. Below are key sections for safety, features, assembly, installation, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Included 3. Safety Information 4. Assembly Instructions 5. Installation with KALLAX Unit 6. Weight Capacity & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Sturdy base frame, adjustable plastic feet, pre-drilled mounting holes, and all necessary hardware.

Feature	Description
Material	Particleboard, Fiberboard, Plastic, Steel
Finish	White stain, Clear acrylic lacquer
Adjustable Feet	4 plastic feet for stability on uneven floors
Mounting System	Designed for secure attachment to KALLAX shelving units
Function	Elevates unit, provides stability, protects from floor moisture
Color	White
Article Number	094.426.16

Parts & Tools Included

Unpack and verify all parts are present before starting assembly.

Base Frame: 1 piece.
Plastic Adjustable Feet: 4 pieces.
Mounting Screws: Set of screws for attaching base to KALLAX unit.
Allen Key: 1 piece (included for screw tightening).
Instruction Manual: This document.

WARNING! Do not discard any packaging until assembly is complete and all parts are verified.

Safety Information

For your safety and to ensure proper assembly, please read all instructions before beginning.

Work Area: Assemble on a clean, soft surface (e.g., carpet or blanket) to avoid scratching parts.
Lifting: The assembled unit with a KALLAX shelf is heavy. Use two people for lifting and moving.
Secure Attachment: Ensure all screws are tightened firmly to prevent instability.
Children: Do not allow children to play with or climb on the furniture.
Wall Anchoring: For taller KALLAX units used with this base, IKEA recommends anchoring the complete unit to the wall to prevent tipping. Use the wall attachment device included with your KALLAX unit.

CAUTION! Failure to follow safety instructions may result in injury or damage to the product.

Assembly Instructions

Assemble the base frame before attaching it to your KALLAX shelving unit.

Attach the Feet: Turn the base frame upside down on a protected surface. Screw the four plastic adjustable feet into the pre-drilled holes at each corner.
Adjust for Level: Once the feet are attached, turn the base right-side up. Place it where the KALLAX unit will stand. Adjust each foot by twisting until the base is stable and does not rock.
Prepare for Mounting: Do not attach the base to the KALLAX unit until the KALLAX unit itself is fully assembled according to its own instructions.

Tip: Keep the Allen key handy for the final mounting step.

Installation with KALLAX Unit

Mounting the base to your KALLAX shelving unit.

Ensure the KALLAX unit is fully assembled and lying flat on its back on a protected surface.
Position the assembled base frame centrally on the bottom of the KALLAX unit. Align the pre-drilled holes in the base with the corresponding holes/slots on the bottom panel of the KALLAX.
Using the provided screws and Allen key, secure the base to the KALLAX unit. Tighten all screws firmly.
With the help of a second person, carefully lift the combined unit upright.
Place the unit in its desired location. Make final adjustments to the feet to ensure it is level and stable.
CRITICAL: If you are using a tall KALLAX unit (e.g., 4x4 or taller), you MUST secure it to the wall using the wall attachment device to prevent tipping.

Weight Capacity & Specifications

Compatible Units: Designed for KALLAX shelving units.
Max Load: The load capacity is determined by the KALLAX unit placed on top. Do not exceed the total weight limit specified in your KALLAX unit's manual.
Dimensions (Base): Varies by KALLAX size. Designed to match the footprint of the corresponding shelf unit.
Foot Adjustment Range: Allows for leveling on slightly uneven floors.
Material Specifications: Particleboard and fiberboard with white stain and clear acrylic lacquer finish. Plastic and steel hardware.

Care & Maintenance

To maintain the appearance and longevity of your KALLAX base:

Cleaning: Wipe with a damp cloth. Wipe dry with a clean cloth.
Avoid: Do not use abrasive cleaners, scouring pads, or solvents as they may damage the finish.
Moisture: Although the base provides some elevation, avoid prolonged exposure to standing water or excessive moisture.
Inspection: Periodically check that all screws are tight and the unit remains stable.

CAUTION! Never drag the furniture across the floor. Always lift it to move.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Base is wobbly or rocks	Feet not adjusted properly; uneven floor	Re-adjust each foot by twisting until the unit is stable. Place on a more level surface if possible.
Base does not align with KALLAX holes	Wrong base model; KALLAX unit not fully assembled	Verify article number (094.426.16). Ensure KALLAX unit is correctly assembled and lying flat.
Screws are loose	Not fully tightened during assembly	Use the Allen key to firmly tighten all mounting screws.
Unit feels unstable when loaded	Exceeds weight limit; not wall anchored (for tall units)	Reduce load to within KALLAX unit's specified limit. For tall units, anchor to wall immediately.
Finish is stained	Exposure to liquids or harsh chemicals	Clean immediately with a damp cloth and dry. Avoid future exposure. Stains may be permanent.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty document for full terms and conditions.

For Assembly Support: Visit the product page on IKEA-USA.com for digital assembly instructions.

For Missing Parts: Contact your local IKEA store or visit the Returns & Services desk.

IKEA Customer Support: Visit www.ikea-usa.com or call 1-888-888-4532.

Important: Retain your proof of purchase for warranty claims.