IKEA KALLAX 005.018.89 Base instructions manual

The IKEA KALLAX 005.018.89 is a versatile shelving unit base designed to support and elevate the KALLAX shelving series. It provides a stable foundation, raising the unit off the floor for easier cleaning and a more elevated aesthetic. Constructed from particleboard, fiberboard, and ABS plastic, it features a simple assembly process, adjustable leveling feet for stability on uneven floors, and is designed to match the clean, modern look of IKEA furniture. Below are key sections for safety, features, assembly, installation, care, and troubleshooting.

Product Overview & Features

Key components: Base frame, adjustable leveling feet, assembly hardware.

Included Parts & Tools

Unpack and verify all parts are present before starting.

1. Base Frame: 1 unit.
2. Adjustable Feet: 4 pieces.
3. Assembly Hardware: Screws (quantity as per pack), possibly dowels.
4. Tool: Allen key (if required, often included).

WARNING! Do not discard packaging until assembly is complete and all parts are verified.

Safety Instructions

For your safety and to ensure proper function, please read all instructions before assembly.

1. Work Area: Assemble on a soft, clean surface (e.g., carpet, blanket) to prevent scratches.
2. Lifting: The assembled base with a KALLAX unit is heavy. Lift with your legs, not your back. Use two people.
3. Stability: Always ensure the base is level and on a solid, flat surface. Use the adjustable feet to compensate for uneven floors.
4. Weight Limit: Do not exceed the maximum load capacity specified for the combined base and shelving unit.
5. Children: Do not allow children to climb on or play with the furniture.

CAUTION! An unlevel or overloaded unit can tip over, causing injury or damage.

Assembly Instructions

Follow these steps to assemble the KALLAX base.

1. Prepare: Lay the base frame upside down on a protected surface.
2. Attach Feet: Insert the adjustable feet into the pre-drilled holes at each corner of the frame. They may snap or screw into place.
3. Secure Feet: If screws are provided, use the included tool to tighten them, securing the feet firmly to the frame.
4. Flip Over: Carefully turn the assembled base right-side up.
5. Check Stability: Gently rock the base to ensure all feet are firmly attached and contact the floor.

Tip: Do not fully tighten leveling adjustments until the shelving unit is placed on top and final leveling is performed.

Installation & Leveling

How to install your KALLAX shelving unit onto the base and ensure it is level.

1. Position Base: Place the assembled base in the desired location.
2. Place Shelving Unit: With assistance, carefully lift the empty KALLAX shelving unit and lower it squarely onto the base. Ensure it is centered.
3. Check for Level: Use a spirit level on top of the shelving unit. Check both front-to-back and side-to-side.
4. Adjust Feet: Turn the adjustable feet clockwise to raise that corner or counter-clockwise to lower it. Make small adjustments and re-check with the level.
5. Final Check: Ensure the unit does not rock. Apply gentle pressure to different corners to confirm stability.

Weight Capacity & Specifications

• Article Number: 005.018.89
• Designer: IKEA of Sweden
• Color: White
• Max Load (Base + KALLAX Unit): Refer to the specific KALLAX unit manual. The base is designed to support the maximum load of the compatible shelving unit.
• Dimensions (Base): Varies by compatible KALLAX size (e.g., for a 4x1 unit).
• Adjustment Range (Feet): Approximately 0-20mm per foot.

Care & Maintenance

Unplug any electronics from the shelving unit before cleaning.

1. Surface: Wipe with a damp cloth. Wipe dry with a clean cloth.
2. Stains: Use a mild household cleaner. Test on an inconspicuous area first.
3. Avoid: Do not use abrasive cleaners, scouring pads, or solvents as they can damage the finish.
4. Feet: Check periodically that the feet are tight and the unit remains level, especially after moving.

CAUTION! Never soak the furniture or allow liquid to pool on surfaces or enter joints.

Disassembly & Moving

To move or store the unit, it is recommended to disassemble.

1. Empty Unit: Remove all items from the KALLAX shelving unit.
2. Separate: With assistance, lift the shelving unit straight up and off the base.
3. Adjust Feet: Screw the adjustable feet fully inward to protect them during transport.
4. Transport: Carry pieces separately. Avoid dragging.
5. Reassembly: Follow the assembly and installation instructions again in the new location.

WARNING! A loaded unit is very heavy and unstable. Always empty it before attempting to move.

Warranty Information

This product is covered by IKEA's limited warranty. The warranty period and terms are detailed in the IKEA warranty document provided in-store or on www.ikea.com. Proof of purchase (receipt) is required for all warranty service.

For spare parts, assembly help, or other inquiries, contact IKEA customer service or visit your local IKEA store.

Troubleshooting

Note: For missing parts or major damage, contact IKEA customer support with your article number (005.018.89) and proof of purchase.

IKEA Support: Visit www.ikea.com or your local IKEA store.