IKEA KALKNÄS 304.962.64 Cabinet instructions manual

The IKEA KALKNÄS 304.962.64 is a versatile cabinet designed for storage in various rooms. It features a clean, modern design, adjustable shelves, soft-closing doors, and is constructed from particleboard with a white foil finish. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

Parts & Hardware List

Before assembly, verify all parts are present. Check the packaging for small parts bags.

Part Description	Quantity	Image Ref.
Cabinet Side Panel (Left)	1	A
Cabinet Side Panel (Right)	1	B
Cabinet Top Panel	1	C
Cabinet Bottom Panel	1	D
Cabinet Back Panel	1	E
Door Panel	2	F
Adjustable Shelf	2	G
Cam Lock Nut	12	1
Cam Lock Screw	12	2
Door Hinge	4	3
Mounting Screw	4	4
Shelf Support Peg	8	5
Door Handle	2	6

Safety Instructions

Read all instructions before assembly. Ensure a clean, spacious work area.

1. Stability Warning: To prevent tip-over, this cabinet must be securely anchored to the wall using the provided wall attachment device and screws.
2. Lifting: The cabinet is heavy. Use two people for lifting and assembly to avoid injury.
3. Tool Safety: Use appropriate tools. Keep children and pets away from the assembly area.
4. Surface Protection: Assemble on a soft surface (e.g., carpet, blanket) to prevent scratches.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall.

Assembly Steps

Follow the numerical order in the included pictorial guide. Use the Allen key provided.

1. Prepare Panels: Lay out all panels with the finished side facing down as shown in the manual.
2. Attach Bottom to Sides: Insert cam lock screws (2) into the bottom panel (D). Align with side panels (A & B) and tighten cam locks (1) clockwise with the Allen key.
3. Attach Top Panel: Similarly, attach the top panel (C) to the side panels using cam locks.
4. Install Back Panel: Place the back panel (E) into the groove. Secure it with the provided nails or screws, starting from the top center.
5. Install Shelf Supports: Insert shelf support pegs (5) into the pre-drilled holes on the side panels at your desired heights.
6. Attach Door Hinges: Screw hinges (3) to the door panels (F) as indicated. Then attach the doors to the cabinet side panels.
7. Adjust Doors: Use the adjustment screws on the hinges to align the doors so they close evenly and smoothly.
8. Attach Handles: Screw door handles (6) to the doors from the front.
9. Place Shelves: Rest the adjustable shelves (G) on the support pegs.

Tip: Do not fully tighten cam locks until the entire frame is squared up.

Installation & Mounting

Wall anchoring is mandatory for safety.

1. Decide on the final location for the cabinet, ensuring it is level and against a solid wall.
2. Locate wall studs using a stud finder. Mark their positions.
3. Position the cabinet against the wall. Inside the cabinet, find the pre-drilled holes for the anti-tip bracket.
4. Attach the provided anti-tip bracket to the wall stud(s) using suitable screws (not always provided for all wall types).
5. Secure the cabinet to the bracket using the provided mounting screws (4).
6. Use a level to ensure the cabinet is perfectly horizontal. Adjust if necessary.

CAUTION! If you cannot secure the bracket into a wall stud, you must use appropriate wall anchors designed for the weight. Consult a professional if unsure.

Adjustments & Use

Door Adjustment: Doors can be adjusted in three dimensions:

• Height: Loosen the screw securing the hinge to the cabinet, adjust door up/down, retighten.
• Depth: Turn the screw at the back of the hinge arm to move the door closer to or farther from the cabinet frame.
• Side-to-Side: Turn the screw on the side of the hinge to align the gap between doors.

Soft-Close Feature: Hinges have integrated soft-closing. Do not oil them. Shelf Adjustment: Remove shelf, reposition support pegs, and replace shelf. Ensure the shelf is level and fully seated on all pegs.

Care & Maintenance

To clean, use a soft, damp cloth. Wipe dry immediately. For stubborn stains, use a mild soap solution.

DO NOT use abrasive cleaners, scouring pads, or harsh chemicals (acetone, alcohol) as they will damage the foil finish.

DO NOT place hot items directly on surfaces or expose to direct heat sources or prolonged moisture.

Specifications

• Article Number: 304.962.64
• Dimensions (W x H x D): 31 1/2" x 74 3/4" x 15 3/4" (80 x 190 x 40 cm)
• Material: Particleboard, Foil, Plastic edging
• Color: White
• Door Type: Hinged, Soft-closing
• Shelf Type: Adjustable, Maximum load: 22 lbs (10 kg) per shelf
• Weight: 55 lbs (25 kg)
• Required Tools: Phillips screwdriver, Hammer (for back panel), Stud finder, Level

Troubleshooting

Symptom	Possible Cause	Corrective Action
Doors not closing evenly	Hinges misaligned	Adjust the door height/depth screws on the hinges as per section 6.
Cabinet wobbles	Not level; not anchored	Check floor level; ensure cabinet is anchored securely to wall studs.
Shelves sagging	Overloaded	Reduce weight on shelf. Do not exceed 22 lbs (10 kg).
Cam lock won't tighten	Cross-threaded or misaligned	Disassemble, ensure screw is straight in the hole, and re-tighten.
Scratches on surface	Abrasive cleaning	Use recommended cleaning method. Minor scratches can sometimes be concealed with a wax stick.
Soft-close not working	Hinge mechanism obstructed	Check for debris. Ensure door is properly attached. Hinge may need replacement.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty document included with your purchase or available at IKEA stores.

Missing Parts? Contact IKEA customer service with your article number (304.962.64).

Assembly Help: Visit the IKEA website for assembly videos and guides.

Support: IKEA Customer Service: 1-888-888-4532 (IKEA) or visit www.ikea.com.