IKEA KABOMBA 004.898.06 Wall Lamp instructions manual

The IKEA KABOMBA 004.898.06 is a modern wall lamp designed for indoor use, featuring a sleek design with a white plastic shade and metal base. It requires assembly and installation onto a wall, operates with a maximum 7W LED bulb (not included), and includes a built-in switch. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Installation Instructions 5. Specifications 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: White plastic shade, metal wall plate, built-in switch, cable with plug, mounting hardware.

Feature	Description
Design	Modern, minimalist white plastic shade with metal accents
Light Source	Max 7W LED bulb (E14 socket, bulb not included)
Switch	Built-in on/off switch on the cord
Mounting	Wall-mounted with included screws and anchors
Cable	White fabric-covered cable with plug
Dimensions	Height: 15 cm, Width: 12 cm, Depth: 10 cm
Material	Shade: Plastic, Base: Metal
Color	White
Intended Use	Indoor residential use only

Safety Information

Read all instructions before installation and use.

Ensure power is turned off at the circuit breaker before installation.
Use only LED bulbs with a maximum of 7W (E14 socket).
Do not install near heat sources or in damp locations.
Keep out of reach of children during assembly.
Do not modify the lamp or use incompatible parts.

WARNING! Risk of electric shock. Installation should be performed by a qualified electrician if unsure. Do not exceed the maximum wattage.

Package Contents

Unpack and verify all parts are included.

Wall lamp shade (white plastic)
Metal wall plate with socket
Fabric-covered cable with plug and switch
Mounting screws (2x)
Wall anchors (2x)
Instruction manual

CAUTION! If any parts are missing or damaged, do not proceed. Contact IKEA customer service.

Installation Instructions

Follow these steps for safe installation.

Turn off power at the circuit breaker.
Choose a location on the wall near a power outlet.
Hold the wall plate against the wall and mark screw holes.
Drill holes and insert wall anchors (if needed for your wall type).
Secure the wall plate with screws.
Screw in the LED bulb (max 7W, E14) into the socket.
Attach the lamp shade to the wall plate by aligning and twisting clockwise until secure.
Route the cable neatly to the power outlet.
Turn power back on and test the lamp using the built-in switch.

Tip: Ensure the lamp is firmly attached and does not wobble. Keep cable away from sharp edges.

Specifications

Model: KABOMBA 004.898.06
Power: Max 7W LED bulb (not included)
Socket: E14
Voltage: 220-240V, 50/60Hz
Dimensions: 15 cm (H) x 12 cm (W) x 10 cm (D)
Material: Plastic shade, metal base
Cable Length: 150 cm
Weight: 0.5 kg
Color: White
Certifications: CE marked, compliant with EU safety standards

Operation

Using the lamp is simple.

Plug the cable into a standard power outlet.
Use the built-in switch on the cable to turn the lamp on/off.
Adjust the direction of light by gently tilting the shade (if adjustable).
For energy savings, use an energy-efficient LED bulb.

Note: The lamp may become warm during use. Allow to cool before touching or changing the bulb.

Care & Maintenance

Unplug the lamp before cleaning.

Use a dry, soft cloth to wipe the shade and base.
Do not use abrasive cleaners or liquids.
For fabric cable, gently vacuum or wipe with a damp cloth if needed.
Check periodically that screws are tight and the lamp is secure.

CAUTION! Never immerse the lamp in water or use harsh chemicals. Do not clean while the lamp is plugged in.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power outlet issue / bulb	Check power outlet with another device; ensure bulb is properly screwed in and functional.
Lamp flickers	Loose bulb or connection	Turn off, tighten bulb; check cable connections.
Lamp feels loose	Loose screws	Turn off power, tighten mounting screws.
Overheating	Bulb wattage too high	Use only max 7W LED bulb; ensure proper ventilation.
Switch not working	Faulty switch	Contact IKEA for replacement or service.

Safety First: If problems persist, disconnect the lamp and consult a qualified electrician.

Warranty & Support

This IKEA product comes with a limited warranty. For warranty terms, visit www.ikea.com or contact your local IKEA store.

Support: IKEA customer service: 1-800-434-4532 (US) or visit www.ikea.com. Keep your receipt for warranty claims.

Recycling: Dispose of the lamp according to local electronic waste regulations. Do not dispose of with household trash.