IKEA JÄRPLIDEN 104.996.21 Lighting instructions manual
The IKEA JÄRPLIDEN 104.996.21 is a ceiling/wall lamp designed for indoor use, featuring a metal shade, E27 bulb socket (max 13W LED or equivalent), and a simple, modern design suitable for various rooms. This manual covers safety information, assembly, installation, operation, maintenance, and troubleshooting. Please read all instructions before installation and use.
Safety Information
Read all safety instructions before installation and use. Failure to follow instructions may result in electric shock, fire, or injury.
| Warning | Description |
|---|
| Electrical Safety | Ensure power is switched OFF at the circuit breaker before installation or maintenance. |
| Bulb Wattage | Do not exceed maximum wattage (13W LED or equivalent E27). Using higher wattage may cause overheating and fire. |
| Installation Location | For indoor use only. Do not install in bathrooms, outdoors, or other damp locations unless specifically rated. |
| Children and Pets | Keep out of reach of children and pets during installation and operation. |
| Surface Condition | Ensure mounting surface is stable, dry, and can support the lamp's weight. |
Package Contents
Unpack carefully and verify all parts are included before starting assembly.
- Lamp shade (metal)
- Mounting bracket with screws
- E27 bulb socket assembly
- Power cord (if applicable for plug-in models)
- Instruction manual (this document)
- Mounting hardware (screws, wall plugs)
NOTE: Contact IKEA customer service if any parts are missing or damaged.
Technical Specifications
- Product Name: JÄRPLIDEN
- Article Number: 104.996.21
- Bulb Socket: E27
- Max Wattage: 13W LED or equivalent (do not use incandescent bulbs over specified wattage)
- Voltage: 120V AC, 60Hz (for North America)
- Dimensions: Refer to product packaging for exact measurements.
- Material: Metal shade, plastic/ceramic socket components.
- Weight: Approximately 1.5 kg (varies by model).
- Color: As specified on packaging (e.g., black, white, silver).
Assembly Instructions
Follow these steps to assemble the lamp before installation.
- Place all parts on a clean, soft surface to avoid scratches.
- Attach the bulb socket to the mounting bracket using provided screws (if not pre-assembled).
- Connect the lamp shade to the socket assembly by aligning and twisting clockwise until secure.
- Ensure all connections are tight but do not over-tighten.
- Insert the appropriate bulb (not included) into the E27 socket.
CAUTION! Do not plug in or turn on power during assembly.
Installation Guide
For ceiling or wall mounting. If unsure, consult a qualified electrician.
- Turn OFF power at the circuit breaker for the installation location.
- Mark drilling points on ceiling/wall using the mounting bracket as a template.
- Drill holes and insert wall plugs (if mounting on drywall or masonry).
- Secure the mounting bracket with provided screws.
- Connect electrical wires from ceiling/wall to lamp wires (black to black, white to white, green/bare to ground). Use wire nuts to secure.
- Attach the assembled lamp to the mounting bracket and secure.
- Restore power and test the lamp.
WARNING! Electrical work should be performed by a qualified person if you are not experienced.
Operation
Once installed, operate using the wall switch or pull chain (if equipped).
- Turn ON/OFF using connected switch.
- Use only recommended bulb types and wattages.
- Allow bulb to cool before touching after extended use.
- For dimmable operation, use only dimmable LED bulbs and compatible dimmer switches.
Tip: For optimal light distribution, ensure bulb is properly seated in socket.
Care & Maintenance
Regular care ensures longevity and safe operation.
- Turn OFF power and allow bulb to cool before cleaning.
- Clean shade with a soft, dry cloth. For stubborn dirt, use a damp cloth and mild detergent. Dry thoroughly.
- Do not use abrasive cleaners, solvents, or chemicals.
- Check periodically for loose screws or connections and tighten if necessary.
- Replace bulb when it flickers or fails, following wattage guidelines.
CAUTION! Never immerse the lamp in water or other liquids.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Lamp does not turn on | Power off, bulb burnt out, loose connection | Check circuit breaker; replace bulb; ensure wires are securely connected. |
| Flickering light | Loose bulb, incompatible dimmer, faulty bulb | Tighten bulb; use dimmable bulb with compatible dimmer; replace bulb. |
| Overheating | Bulb wattage too high, poor ventilation | Use correct wattage bulb; ensure lamp is not covered or in enclosed fixture. |
| Lamp loose on wall/ceiling | Mounting screws loose, improper installation | Tighten screws; verify mounting surface can support weight. |
| Buzzing sound | Incompatible bulb or dimmer, electrical issue | Change bulb; check dimmer compatibility; consult electrician if persistent. |
Note: If problems persist, disconnect power and contact IKEA support.
Disposal & Recycling
Dispose of product responsibly according to local regulations.
- Unplug and remove bulb before disposal.
- Recycle metal and plastic components where facilities exist.
- Dispose of bulbs separately (LED bulbs may contain electronic components).
- Contact local waste management for specific disposal guidelines.
Environmental Note: IKEA encourages recycling to reduce environmental impact.
Warranty Information
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty card included in packaging or visit www.ikea.com for details.
- Warranty Period: As per local IKEA policy (typically 1-5 years).
- Coverage: Defects in materials and workmanship under normal use.
- Not Covered: Damage from improper installation, misuse, accidents, or unauthorized modifications.
- Support: For warranty claims or assistance, contact IKEA customer service with article number (104.996.21) and proof of purchase.
Contact: IKEA Customer Support: 1-800-434-4532 (US) or visit www.ikea.com.
IKEA JÄRPLIDEN 104.996.21 Lighting instructions manual © - All Rights Reserved 2025