IKEA JONAXEL 504.199.72 Shelf instructions manual

The IKEA JONAXEL 504.199.72 is a modular shelving system designed for flexible storage solutions. It features a sturdy metal frame, adjustable shelves, and a variety of optional accessories for customization. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

Features at a Glance

Key components: Metal frame, adjustable shelves, wall mounting brackets, and optional accessories like baskets and hooks.

Package Contents

Unpack and verify all parts are included before assembly.

• Frame Parts: Vertical posts (4), horizontal beams (as per model).
• Shelves: Adjustable shelves (quantity varies by configuration).
• Hardware: Screws, wall brackets, mounting plugs, Allen key.
• Accessories: If included: baskets, hooks, etc.
• Instruction Manual: This document.

WARNING! Check for damaged parts; do not use if any component is defective.

Safety Instructions

Follow these instructions to ensure safe assembly and use.

1. Stability: Always secure the unit to the wall using provided brackets to prevent tipping.
2. Weight Distribution: Distribute weight evenly across shelves; do not exceed maximum load limits.
3. Assembly: Assemble on a soft surface to avoid scratching parts.
4. Tools: Use only the provided tools or appropriate substitutes.
5. Children: Do not allow children to climb on the shelving unit.

CAUTION! Heavy items should be placed on lower shelves. Ensure the unit is level after installation.

Assembly Instructions

Assemble the frame before attaching shelves and accessories.

1. Prepare Area: Clear a spacious, flat area for assembly.
2. Connect Posts and Beams: Insert horizontal beams into vertical posts; secure with provided screws.
3. Tighten Joints: Use the Allen key to ensure all connections are firm.
4. Attach Shelves: Place shelves on support pins at desired heights.
5. Check Stability: Gently shake the unit to ensure it is sturdy.

Tip: Assemble with a partner for easier handling of larger parts.

Installation & Mounting

Wall mounting is required for stability.

1. Locate Studs: Use a stud finder to locate wall studs.
2. Mark Positions: Hold the unit against the wall; mark bracket screw holes.
3. Drill Holes: Drill pilot holes at marked positions.
4. Attach Brackets: Secure brackets to the wall using screws and plugs.
5. Secure Unit: Hang the shelving unit on the brackets; tighten security screws.

WARNING! If mounting on drywall without studs, use appropriate wall anchors rated for the unit's weight.

Adjusting Shelves

Shelves can be repositioned to accommodate items of different sizes.

1. Remove Items: Clear the shelf before adjustment.
2. Lift and Remove: Lift the shelf up and out of the support pins.
3. Reposition Pins: Move support pins to desired height holes on the vertical posts.
4. Replace Shelf: Lower the shelf onto the pins at the new height.
5. Check Level: Ensure the shelf is level and securely seated.

Note: Adjust shelves before loading with heavy items.

Adding Accessories

Compatible JONAXEL accessories enhance functionality.

• Baskets: Hook onto horizontal beams for additional storage.
• Hooks: Attach to beams for hanging items like towels or bags.
• Rods: Install between posts for hanging clothing.

Installation: Follow accessory-specific instructions; ensure they are securely attached before use.

Care & Maintenance

Proper care ensures longevity of the shelving unit.

1. Cleaning: Wipe with a damp cloth; dry immediately. Do not use abrasive cleaners.
2. Inspection: Periodically check tightness of screws and brackets.
3. Relocation: Empty the unit before moving; disassemble if necessary.

CAUTION! Avoid excessive moisture and direct sunlight to prevent damage.

Weight Limits

Adhere to maximum load capacities for safety.

WARNING! Exceeding weight limits may cause structural failure and injury.

Troubleshooting

Support: For missing parts or further assistance, contact IKEA customer service or visit www.ikea.com.