IKEA JONAXEL 092.976.57 Clothes Rail instructions manual

The IKEA JONAXEL 092.976.57 is a versatile, wall-mounted clothes rail system designed for organizing clothing and accessories in wardrobes, closets, or utility rooms. It features adjustable height, modular components for customization, and a sturdy steel construction. Below are key sections for safety, parts list, assembly, installation, usage, care, and troubleshooting.

1. Parts Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Installation 6. Adjusting the Rail 7. Usage Tips 8. Care & Maintenance 9. Specifications 10. Troubleshooting

Parts Included

Check that all components are present before starting assembly.

Part DescriptionQuantityImage Reference
Vertical upright (steel)2A
Horizontal clothes rail1B
Wall mounting brackets2C
Height adjustment screws4D
Wall plugs and screwsSetE
End caps2F
Assembly manual1-

Tools Required

You will need the following tools (not included):

Safety Instructions

WARNING! Failure to follow these instructions may result in serious injury or damage.

  1. This product must be securely mounted to a wall. Do not use freestanding.
  2. Ensure the wall is solid and can support the weight of the rail and clothing (max load 30 kg).
  3. Use two people for assembly and installation to prevent accidents.
  4. Keep small parts away from children during assembly.
  5. Do not exceed the maximum weight limit specified.
  6. Check all fittings periodically for tightness.

Assembly Steps

Assemble the components before mounting to the wall.

  1. Attach the two vertical uprights (A) to the wall mounting brackets (C) using the provided screws.
  2. Insert the horizontal clothes rail (B) into the slots on the vertical uprights.
  3. Secure the rail with the height adjustment screws (D) – do not fully tighten yet.
  4. Attach the end caps (F) to both ends of the horizontal rail.
  5. Ensure all connections are hand-tight; final tightening will occur after wall mounting.

Tip: Lay all parts on a soft surface to avoid scratching during assembly.

Wall Installation

Mounting the assembled unit to the wall.

  1. Decide on the installation height (recommended: 180-200 cm from floor for full-length garments).
  2. Hold the assembled unit against the wall in the desired position. Use a level to ensure it is horizontal.
  3. Mark the screw holes on the wall with a pencil.
  4. Drill holes at the marked points using a drill bit suitable for your wall (brick, drywall, etc.).
  5. Insert wall plugs (E) into the holes.
  6. Lift the unit and align with the holes. Insert and tighten all screws securely.
  7. Fully tighten the height adjustment screws (D) on the vertical uprights.

CAUTION! Ensure the unit is level before final tightening. Uneven installation may cause instability.

Adjusting the Rail

The rail height can be adjusted to suit your needs.

  1. Loosen the height adjustment screws (D) on both vertical uprights.
  2. Slide the horizontal rail up or down to the desired height.
  3. Ensure both sides are at the same level.
  4. Re-tighten the adjustment screws firmly.

Note: Adjust height before loading with clothes for easier handling.

Usage Tips

Care & Maintenance

To ensure longevity and appearance:

  1. Wipe with a soft, damp cloth to clean. Do not use abrasive cleaners.
  2. Dry immediately after cleaning.
  3. Check mounting screws and adjustment screws every 6 months for tightness.
  4. Do not hang wet clothing directly on the rail for extended periods to prevent rust.
  5. Avoid exposing to excessive moisture or direct sunlight.

CAUTION! Do not use harsh chemicals or steel wool on the surface.

Specifications

Troubleshooting

IssuePossible CauseSolution
Rail feels looseScrews not tightenedTighten all screws on brackets and adjustment points.
Unit not levelUneven wall or incorrect installationLoosen screws, adjust with level, re-tighten.
Difficulty sliding railAdjustment screws too tight or debris in tracksLoosen screws slightly, clean tracks, re-adjust.
Wall mounting failsWrong wall plugs or insufficient wall strengthUse appropriate wall anchors for your wall type. Consult a professional if needed.
Scratches on surfaceDuring assembly or useHandle with care. Minor scratches can be touched up with matching paint.

Need Help? For missing parts or further assistance, contact IKEA customer service at your local store or visit www.ikea.com.

IKEA JONAXEL 092.976.57 Clothes Rail instructions manual © - All Rights Reserved 2025