IKEA JONAXEL 092.971.34 Storage Frame instructions manual

The IKEA JONAXEL 092.971.34 is a modular storage frame system designed for flexible organization in various rooms. It features a sturdy metal frame, adjustable shelf positions, and compatibility with multiple JONAXEL storage boxes and accessories. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Product Overview 2. Safety Information 3. Included Parts & Tools 4. Assembly Instructions 5. Installation & Mounting 6. Configuring Shelves & Accessories 7. Weight Limits & Capacity 8. Care & Maintenance 9. Disassembly & Moving 10. Troubleshooting 11. Warranty & Support

Product Overview

Key components: Metal frame uprights, cross beams, shelf supports, mounting hardware, wall attachment device.

Component	Description
Frame Uprights (4)	Vertical metal posts with pre-drilled holes for shelf adjustment
Cross Beams (8)	Horizontal connectors for front and rear of frame
Shelf Supports (16+)	Pegs that insert into upright holes to hold shelves
Mounting Brackets	For securing frame to wall (included)
Assembly Hardware	Screws, bolts, washers, and wall plugs
Hex Key (Allen Wrench)	Tool provided for assembly
Instruction Manual	This guide

Safety Information

Read all instructions before assembly. Ensure proper installation to prevent tipping.

Use on stable, level floor only.
Always secure frame to wall using provided brackets to prevent tipping.
Do not exceed maximum weight limits for shelves and frame.
Keep small children away during assembly.
Use appropriate personal protective equipment if needed.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided anti-tip device.

Included Parts & Tools

Check that all parts are present before starting assembly.

Frame Uprights: 4 pieces (labeled if applicable).
Cross Beams: 8 pieces (4 front, 4 rear).
Shelf Support Pegs: 16 pieces (minimum).
Mounting Kit: Brackets, screws, wall plugs.
Assembly Bolts/Screws: Various sizes as per parts list.
Hex Key (Allen Wrench): 1 piece.

CAUTION! Do not discard any parts until assembly is complete and successful.

Assembly Instructions

Follow steps in order. Two people recommended.

Lay all parts on a soft surface to prevent scratching.
Attach bottom cross beams to uprights to form base rectangle. Hand-tighten bolts.
Add middle and top cross beams to create full frame structure.
Ensure all connections are square and tight using the hex key.
Insert shelf support pegs into desired holes on uprights.
Place shelves onto supports.
Move assembled frame to desired location against wall.

Tip: Do not fully tighten all bolts until the entire frame is squared up.

Installation & Mounting

Wall Attachment is MANDATORY.

Position frame where it will be used, ensuring it is level.
Mark drill holes on wall through mounting bracket holes.
Drill holes into wall studs if possible. Use provided wall plugs for drywall.
Secure brackets to wall with screws.
Attach frame to brackets using provided hardware.
Double-check all connections for tightness.

WARNING! Failure to secure the frame to the wall can result in serious injury or death from tipping.

Configuring Shelves & Accessories

Shelf height is adjustable. Compatible with JONAXEL boxes, baskets, and rods.

Remove shelf by lifting it off support pegs.
Relocate support pegs to different holes on uprights.
Replace shelf onto new peg positions.
Add JONAXEL storage boxes by hooking lip over shelf edge.
Install drawer runners or clothing rods if using corresponding accessories.

Note: Ensure shelves are level and securely seated on all four supports.

Weight Limits & Capacity

Maximum Load per Shelf: 55 lbs (25 kg) evenly distributed.
Total Frame Capacity: 220 lbs (100 kg) across all shelves.
Do Not Stand or Sit on Unit.
Distribute weight evenly. Place heavier items on lower shelves.

CAUTION! Exceeding weight limits can cause frame failure and injury.

Care & Maintenance

Clean with a soft, damp cloth. Dry immediately.

Use mild soap solution if needed. Avoid abrasive cleaners.
Do not use wax, polish, or harsh chemicals on metal surfaces.
Check wall attachment and frame tightness every 6 months.

CAUTION! Do not use steam cleaners or high-pressure washers.

Disassembly & Moving

To move or store the unit, follow reverse assembly order.

Remove all items from shelves and boxes.
Unscrew wall attachment brackets from frame first, then from wall.
Remove shelves.
Loosen and remove cross beams using hex key.
Store all hardware in a labeled bag.
Reassemble at new location, ensuring to re-attach to wall.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Frame wobbles	Uneven floor, loose bolts	Check floor level; tighten all frame connections securely.
Shelf sags or bends	Weight limit exceeded	Reduce load on shelf; ensure weight is evenly distributed.
Cannot insert support peg	Hole misaligned or obstructed	Ensure uprights are aligned; clear any debris from hole.
Hardware missing	Not included or lost	Contact IKEA for replacement parts (see Support).
Frame not level	Assembly error, uneven surface	Disassemble and reassemble on level surface; adjust feet if applicable.

Warranty & Support

Refer to IKEA's limited warranty for terms. This product is designed for indoor use only.

IKEA Support: Visit www.ikea.com for your country or contact your local IKEA store. Have the product name (JONAXEL) and article number (092.971.34) ready.

Spare Parts: Available through IKEA services.