IKEA JOGGESÖ 394.956.94 Umbrella instructions manual

The IKEA JOGGESÖ 394.956.94 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a durable polyester canopy, a sturdy aluminum and steel frame, a manual crank or tilt mechanism (depending on model), a weighted base for stability, and UV protection. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Adjustments & Positioning 7. Closing & Storage 8. Safety Features 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Polyester canopy, Aluminum/steel pole, Crank handle, Tilt mechanism (if applicable), Weighted base, Ventilation top.

Feature	Description
Canopy Material	Polyester fabric with water-resistant coating
Frame Material	Aluminum and steel construction for durability
Crank Handle	For easy opening and closing of the canopy
Tilt Mechanism	Allows angle adjustment for sun protection (on select models)
Weighted Base	Provides stability; may be fillable with sand or water
Ventilation Top	Wind vent to reduce pressure and improve stability
UV Protection	Canopy offers UPF 50+ sun protection
Mounting Options	Freestanding with base or through-table installation
Color Options	Typically available in neutral tones (beige, grey, green)
Size	Approx. 3m (9.8 ft) diameter, 2.4m (7.9 ft) height

Assembly Instructions

Unpack all parts and check contents against included list. Assemble on a flat, clean surface.

Assemble the pole: Connect pole sections by twisting or inserting pins as per instructions.
Attach ribs to hub: Slide ribs into the central hub and secure with provided screws.
Attach canopy: Drape canopy over ribs, aligning grommets with rib ends; secure with ties or caps.
Install crank mechanism: Attach crank handle to pole at indicated position.
Prepare base: Fill weighted base with sand or water as recommended for stability.
Insert pole into base: Secure pole into base using locking pin or bolt.

WARNING! Umbrella is heavy; use two people for assembly. Ensure all connections are tight before use.

First-Time Setup

After assembly, position umbrella in desired location.

Place base: Position base on flat, stable ground; ensure it is fully weighted.
Open umbrella: Turn crank handle clockwise to extend canopy fully.
Adjust tilt: If equipped, use tilt lever to set desired angle.
Secure: Check that all locking mechanisms are engaged.

CAUTION! Do not use in high winds. Ensure base is adequately weighted to prevent tipping.

Specifications

Model: JOGGESÖ 394.956.94
Type: Freestanding garden umbrella
Canopy Diameter: Approx. 3 meters (9.8 feet)
Height: Approx. 2.4 meters (7.9 feet)
Frame: Aluminum and steel
Canopy Material: Polyester, water-resistant
Mechanism: Manual crank, optional tilt
Base: Weighted, fillable with sand/water
Weight: Varies; approx. 15-20 kg (33-44 lbs) without base filling
UV Protection: UPF 50+
Color: As per product label

Controls and Operation

Primary controls: Crank handle, Tilt lever (if applicable), Pole lock.

Opening: Turn crank handle clockwise until canopy is fully extended and taut.

Closing: Turn crank handle counterclockwise to lower canopy; secure with strap.

Tilting: Pull tilt lever (if equipped) to release, adjust angle, then re-engage lever.

Rotation: Some models allow pole rotation; loosen rotation lock, turn, then retighten.

Adjustments & Positioning

For optimal sun protection and stability.

Angle adjustment: Use tilt mechanism to block sun at different times of day.
Height adjustment: Not typically adjustable; fixed height design.
Relocation: Empty base if filled with water for moving; refill after repositioning.

Tip: Close umbrella when not in use or in windy conditions to prolong lifespan.

Closing & Storage

Proper closure prevents damage.

Lower canopy: Turn crank counterclockwise until fully closed.
Secure canopy: Use attached strap to tie closed canopy.
For storage: Remove from base if possible; store in dry, cool place.
Long-term: Clean and dry thoroughly before storage; avoid folding when wet.

WARNING! Do not force crank if resistance is felt; check for obstructions. Keep fingers clear of moving parts.

Safety Features

Ventilated canopy: Reduces wind catching. Weighted base: Prevents tipping. Smooth crank operation: Prevents sudden movements.

Safety Tips: Always close in high winds. Ensure base is on level ground. Keep away from fire sources.

Care & Cleaning

Regular maintenance ensures longevity.

Canopy: Use mild soap and water; soft brush for stains. Rinse thoroughly; air dry completely before closing.

Frame: Wipe with damp cloth; dry to prevent corrosion.

Base: Empty and clean periodically if filled with water to prevent algae.

CAUTION! Do not use harsh chemicals or abrasive cleaners. Do not machine wash canopy.

Warranty Information

IKEA limited warranty applies; refer to IKEA warranty terms for details. Typically covers material and manufacturing defects for a specified period from purchase date. Proof of purchase required. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Umbrella won't open	Crank jammed, ribs stuck	Check for obstructions; lubricate crank mechanism if needed; ensure ribs are aligned.
Umbrella tilts or tips	Base not weighted enough, uneven ground	Add more sand/water to base; reposition on level surface.
Canopy sags or doesn't tighten	Ribs not fully extended, canopy misaligned	Open fully; adjust canopy ties; ensure ribs are locked into hub.
Crank handle is stiff	Lack of lubrication, debris	Clean mechanism; apply silicone-based lubricant to moving parts.
Water pooling on canopy	Canopy not taut, material stretching	Open fully to stretch fabric; gently push up from underside to shed water.
Frame corrosion	Exposure to moisture, lack of cleaning	Clean and dry regularly; store indoors during off-season; touch up with paint if needed.

Service: For missing parts or defects, contact IKEA customer service with product number and proof of purchase.