IKEA IVAR 504.845.09 Storage Box instructions manual

The IKEA IVAR 504.845.09 Storage Box is a versatile wooden storage solution designed for use with the IVAR shelving system. It features a simple, natural pine construction, a sliding lid for easy access, and is designed for easy assembly. Below are key sections for safety, features, assembly, installation, use, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Assembly Instructions 4. Specifications 5. Installation & Placement 6. Using the Storage Box 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Solid pine wood construction, sliding lid, pre-drilled holes, assembly hardware included.

Feature	Description
Material	Solid pine, untreated
Dimensions (Assembled)	Width: XX cm, Depth: XX cm, Height: XX cm
Lid Type	Sliding lid for easy access
Compatibility	Designed for IVAR shelving system (sold separately)
Finish	Natural, can be stained, painted, or treated as desired
Assembly	Tool-free or minimal tool assembly with included hardware
Weight Capacity	Up to XX kg when properly installed on IVAR shelf
Ventilation	Gaps in design allow for air circulation

Package Contents

Unpack and verify all parts are present before starting assembly.

Box Sides: 2 pieces.
Box Front/Back Panels: 2 pieces.
Box Bottom Panel: 1 piece.
Sliding Lid: 1 piece.
Lid Stops/Guides: 2 pieces.
Assembly Hardware: Cam locks, dowels, screws as required.
Instruction Manual: This document.

WARNING! Check for splinters or damaged parts. Do not use damaged components.

Assembly Instructions

Assemble on a clean, soft surface to avoid scratches.

Prepare Parts: Lay out all wooden panels and hardware.
Join Sides to Bottom: Insert dowels into side panels and attach to the bottom panel.
Attach Front & Back: Connect the front and back panels to the side and bottom assembly using cam locks or screws.
Secure Structure: Tighten all cam locks clockwise until firm (do not over-tighten).
Install Lid Guides: Attach the small lid stop/guide pieces to the inside top of the front and back panels as indicated.
Insert Sliding Lid: Place the lid onto the guides, ensuring it slides smoothly from side to side.
Final Check: Ensure all joints are tight and the box is square. The lid should slide without catching.

CAUTION! Assemble with care to avoid pinching fingers. Keep small hardware away from children.

Specifications

Article Number: 504.845.09
Design Series: IVAR
Primary Material: Solid pine
Color: Untreated pine (light brown)
Assembled Weight: Approximately XX kg
Max. Load: XX kg (when placed on a supported IVAR shelf)
Environmental Info: Made from renewable solid wood.
Packaging: Flat-pack

Installation & Placement

This box is designed to sit on a shelf within the IVAR system.

Ensure your IVAR shelf is level, secure, and can support the combined weight of the box and its contents.
Place the assembled box onto the shelf.
For stability, it is recommended not to overhang the box beyond the edges of the shelf.
Do not stack multiple boxes unless specified as safe in the IVAR system instructions.

Tip: Distribute weight evenly inside the box. Place heavier items at the bottom.

Using the Storage Box

The sliding lid provides convenient access while keeping contents tidy.

Opening: Slide the lid to the left or right to open.
Closing: Slide the lid back to the center to close. The lid stops prevent it from sliding off completely.
Organization: Ideal for storing toys, crafts, tools, linens, or other household items.
Weight Limit: Adhere to the maximum load capacity. Overloading can damage the box and the shelf.

WARNING! Do not slam the lid shut. Slide gently to avoid damaging the guides or pinching fingers.

Care & Maintenance

Clean with a dry or slightly damp cloth. For deeper cleaning, use a mild soap solution. Dry immediately.

Untreated Wood: The pine is untreated. You may apply IKEA stain, paint, or wood oil to change color and protect the surface. Follow the product instructions for the treatment.
Avoid: Do not use abrasive cleaners, scouring pads, or harsh chemicals.
Moisture: Avoid prolonged exposure to moisture or direct sunlight to prevent warping or discoloration.

CAUTION! If treating with oils or stains, ensure proper ventilation and keep away from open flame.

Safety Information

This is a storage product, not a toy or furniture to climb on.

Keep away from direct heat sources like radiators or fires.
Do not allow children to climb on or hang from the box.
Ensure the box is securely placed on a stable, level shelf.
Check periodically that all joints remain tight and the structure is sound.

Warranty & Support

Refer to the IKEA warranty terms included with your purchase or available at www.ikea.com. This product is covered by IKEA's limited warranty. For spare parts, assembly help, or other support, visit your local IKEA store or contact IKEA customer service online.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Box feels wobbly	Cam locks not fully tightened; dowels not fully inserted	Disassemble slightly, ensure all dowels are fully seated. Re-tighten all cam locks firmly.
Lid sticks or does not slide	Lid guides misaligned; wood swelling	Check guide installation. Lightly sand the edges of the lid if swollen due to humidity.
Lid falls off	Lid stops not installed or damaged	Install or re-attach the lid stop pieces to the front and back panels.
Wood has splinters	Natural wood characteristic; rough edge	Lightly sand the affected area with fine-grit sandpaper. Wear gloves during handling if needed.
Missing part	Packaging error	Contact IKEA customer service with your article number (504.845.09) for spare parts.

Re-tighten: Wood may settle. Check and tighten cam locks after a few weeks of use.

Support: Visit www.ikea.com or your local IKEA store.