IKEA IVAR 092.485.44 Side Unit instructions manual

The IKEA IVAR 092.485.44 is a modular pine wood side unit designed for the IVAR storage system. It features a classic, natural wood finish, adjustable shelves, and a versatile design suitable for various rooms. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Installation & Placement 6. Adjusting Shelves 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Side panels, shelves, back panel, top panel, base frame, screws, dowels, cam locks, wall attachment device.

Part Description	Quantity	Image Ref.
Side panel (left)	1	A
Side panel (right)	1	B
Adjustable shelf	2	C
Back panel (fiberboard)	1	D
Top panel	1	E
Base frame front/back rails	2	F
Wooden dowels (8x40mm)	10	G
Cam locks with screws	6	H
Wall attachment device	1 set	I

Tools Required

Tools not included; gather before starting.

Phillips screwdriver (size #2)
Hammer (for dowels)
Pencil
Tape measure
Level (for installation)
Drill (optional, for wall mounting)

NOTE: Using correct tools ensures proper assembly and prevents damage.

Safety Instructions

Read all instructions before assembly.

Work Area: Assemble on clean, flat, protected surface to avoid scratches.
Lifting: Unit is heavy; use two people for lifting and positioning.
Children: Keep children away during assembly due to small parts.
Wall Attachment: MUST secure unit to wall to prevent tipping. Use provided anti-tip device.
Load Capacity: Do not exceed 55 lbs (25 kg) per shelf. Distribute weight evenly.

WARNING! Failure to secure unit to wall can result in serious injury or death from tipping.

Assembly Steps

Follow numerical order shown in included illustration.

Step 1: Attach base frame rails to side panels using dowels (G) and cam locks (H). Ensure front rail is flush with panel fronts.
Step 2: Insert back panel (D) into grooves on side panels. Tap gently with hammer if needed.
Step 3: Attach top panel (E) to side panels using remaining dowels and cam locks. Tighten cam locks clockwise until firm.
Step 4: Place adjustable shelves (C) onto shelf support pins (pre-installed). Adjust height as desired.
Step 5: Check all joints are tight and unit is square.

Tip: Do not fully tighten cam locks until all parts are aligned.

Installation & Placement

Choose location carefully before moving assembled unit.

Surface: Place on even, solid floor. Use furniture pads if on hard flooring.
Wall Attachment: Locate wall studs. Position unit against wall. Attach anti-tip bracket to wall stud using screws (not included for masonry). Attach other part to unit back panel. Tighten securely.
Clearance: Allow 2-inch clearance from heat sources (radiators, vents).
Leveling: Check unit is level side-to-side and front-to-back.

CAUTION! Never place unit on uneven or unstable surfaces.

Adjusting Shelves

Shelves are adjustable for custom storage.

Remove all items from shelf.
Lift shelf slightly and pull forward to disengage from support pins.
Reposition shelf support pins to desired height (holes are pre-drilled).
Place shelf onto new set of pins, ensuring it sits level and secure.

Note: For stability, ensure at least two pins support each shelf end.

Care & Maintenance

Pine wood requires proper care to maintain appearance.

Cleaning: Dust regularly with soft, dry cloth. For stains, use damp cloth with mild soap. Dry immediately.
Protection: Avoid prolonged direct sunlight to prevent fading. Use coasters under drinks.
Repair: Minor scratches can be touched up with IKEA IVAR touch-up pen (sold separately).
Do Not: Use abrasive cleaners, solvents, or wax polishes.

CAUTION! Excess moisture can cause wood to warp.

Specifications

Model: IVAR 092.485.44
Material: Solid pine, fiberboard back panel
Finish: Natural pine, clear lacquered
Dimensions (HxWxD): 31.5" x 23.625" x 13.75" (80cm x 60cm x 35cm)
Shelf Adjustability: 1-inch increments
Weight Capacity: 55 lbs (25 kg) per shelf, 165 lbs (75 kg) total
Weight (unit only): 28.6 lbs (13 kg)
Country of Origin: Designed and quality tested by IKEA of Sweden

Troubleshooting

Issue	Possible Cause	Solution
Unit wobbles	Uneven floor; loose joints	Check floor; tighten all cam locks and screws; adjust furniture pads.
Shelves not level	Support pins not at same height	Ensure pins are in corresponding holes on both sides.
Difficulty assembling joints	Dowels misaligned	Disassemble, ensure dowels fully inserted into correct holes before joining panels.
Back panel won't fit	Grooves obstructed	Check for debris in grooves; gently tap panel from top.
Cam lock won't tighten	Cam screw not engaged	Loosen, ensure screw head is properly in cam mechanism before turning.

Missing Parts? Contact IKEA customer service with article number (092.485.44).

Warranty & Support

IKEA limited warranty applies. See IKEA terms or www.IKEA.com for details.

Customer Support: Visit your local IKEA store or contact:

US: 1-888-888-4532
Website: www.IKEA-usa.com
Online Assembly Guides: www.IKEA.com/assembly

Recycling: Dispose of packaging responsibly. Unit can be disassembled for recycling.