IKEA ISNÅLEN 005.143.73 Work Lamp instructions manual

The IKEA ISNÅLEN 005.143.73 is a versatile work lamp designed for focused task lighting. It features an adjustable head and arm for precise light direction, a stable base, an energy-efficient LED light source, a touch-sensitive on/off switch, and a modern, minimalist design. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Required 3. Assembly Instructions 4. Specifications 5. Controls and Operation 6. Positioning & Adjustment 7. Replacing the Light Source 8. Care & Cleaning 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Adjustable lamp head, Flexible gooseneck arm, Weighted stable base, Integrated LED module, Touch control switch.

Feature	Description
Adjustable Head	Rotates and tilts to direct light precisely where needed
Flexible Gooseneck Arm	Can be bent and shaped to hold position
Weighted Base	Provides stability on desks and work surfaces
Integrated LED Module	Energy-efficient, long-lasting light source (non-replaceable)
Touch Control Switch	Sensitive touch area on base or neck for on/off operation
Power Input	For connecting the included power adapter
Cable Management	Channel in base to organize power cord

Parts & Tools Required

Unpack and inspect all contents before assembly.

Lamp Base: Weighted base unit.
Gooseneck Arm: Flexible metal arm.
Lamp Head: Housing with integrated LED.
Power Adapter: AC/DC adapter with cable.
Instruction Manual: This document.

Tools Needed: None. Assembly is tool-free.

Assembly Instructions

Follow these steps for correct and safe assembly.

Prepare the Base: Place the weighted base on a flat, stable surface.
Attach the Gooseneck Arm: Insert the threaded end of the gooseneck arm into the socket on the base. Turn clockwise until hand-tight. Do not over-tighten.
Attach the Lamp Head: Align the connector on the lamp head with the top of the gooseneck arm. Push gently and twist clockwise until it clicks into place and is secure.
Connect Power: Plug the DC connector of the power adapter into the port on the base or arm. Route the cable through the cable management channel if present.
Plug In: Plug the AC adapter into a standard 120V wall outlet.

CAUTION! Ensure the lamp is unplugged during assembly. Do not force connections.

Specifications

Model: ISNÅLEN 005.143.73
Light Source: Integrated, non-replaceable LED.
Color Temperature: 4000K (Cool White).
Luminous Flux: 300 lumens.
Power Consumption: 5W.
Input: 100-240V AC, 50/60Hz via adapter.
Output (Adapter): 12V DC.
Arm Length: Approx. 14 inches (35.5 cm).
Base Diameter: Approx. 6 inches (15 cm).
Material: Steel, plastic, weighted filler.

Controls and Operation

Operation is simple and intuitive.

Turning On/Off: Gently touch the touch-sensitive area (usually marked on the base or lower arm). One touch turns the lamp on, another touch turns it off.

Adjusting Light Direction: 1. Head Adjustment: Grip the lamp head and tilt or rotate it to aim the light. 2. Arm Adjustment: Gently bend the flexible gooseneck arm to raise, lower, or reposition the light. It will hold its shape.

Note: There is no brightness dimming function on this model.

Positioning & Adjustment

For optimal use and eye comfort.

Place the lamp on a stable, flat surface near your work area.
Position the lamp so the light shines onto your task (e.g., book, keyboard, craft) from the side or slightly behind to avoid glare on your work or screen.
Adjust the arm and head so the light beam is focused where you need it, without shining directly into your eyes.
Ensure the power cord is safely routed to avoid tripping hazards.

Tip: Avoid looking directly at the LED light source when it is on.

Replacing the Light Source

Important: This lamp uses an integrated LED module. It is not designed for user replacement.

Lifespan: The LED has a very long lifespan under normal use.
If Light Fails: If the lamp stops lighting and power is confirmed, the integrated LED module may have reached end of life.
Action: The entire lamp unit must be replaced. Do not attempt to open the lamp head or repair the LED.

WARNING! Never disassemble the lamp head. There are no user-serviceable parts inside. Risk of electric shock.

Care & Cleaning

Unplug the lamp from the wall outlet before cleaning.

Use a soft, dry or slightly damp cloth to wipe the base, arm, and head.
For stubborn marks, use a mild soap solution. Do not use abrasive cleaners or solvents.
Ensure no moisture enters any openings or seams.
Dry thoroughly with a soft cloth before plugging back in.

CAUTION! Do not immerse any part of the lamp in water or other liquids.

Safety Information

Read all instructions before use.

This lamp is for indoor use only.
Use only with the provided power adapter.
Do not use in damp or wet locations (e.g., bathroom).
Do not place the lamp near heat sources (e.g., radiators, stoves).
Do not cover the lamp or place objects on it while in use.
To reduce the risk of fire or electric shock, do not disassemble or attempt to repair.
Keep out of reach of young children.
The flexible arm is strong but avoid excessive, sharp, or repeated bending which may cause metal fatigue.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for specific terms and duration in your country.

For customer support, spare parts (like the power adapter), or more information: - Visit the IKEA website: www.ikea.com - Contact your local IKEA store. - Refer to the product page for ISNÅLEN (005.143.73).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Loose connection	Check if wall outlet works. Ensure power adapter is firmly plugged into lamp and wall outlet. Try touching the control area firmly.
Light flickers	Loose connection / Adapter issue	Check all connections. Try a different wall outlet. If problem persists, the adapter or LED may be faulty.
Lamp is unstable	Base not on flat surface / Arm over-extended	Place base on a flat, level surface. Reposition the arm so its weight is centered over the base.
Arm does not hold position	Over-flexed / Worn	Gently reshape. Avoid bending it at extreme angles repeatedly. If it becomes permanently loose, it may need replacement.
Touch control is unresponsive	Dirty surface / Internal fault	Clean the touch area with a dry cloth. Unplug for 1 minute, then retry. If still unresponsive, the unit may be defective.

Disposal: Dispose of this product and its electronic components according to local regulations for electronic waste (WEEE). Do not dispose with household trash.