IKEA ISJAKT 704.597.16 Floor Lamp instructions manual

The IKEA ISJAKT 704.597.16 is a modern floor lamp designed for ambient lighting, featuring a sturdy metal base, adjustable height or angle mechanism (if applicable), an integrated on/off switch, and compatibility with standard E26/E27 bulb sockets (max wattage as specified). It requires simple assembly and is intended for indoor residential use. Below are key sections for safety, parts identification, assembly instructions, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Care & Maintenance 8. Warranty & Support 9. Troubleshooting

Parts & Components

Key components included in the package: Lamp base (metal), stem/rod sections, lamp shade, bulb socket assembly, hardware pack (screws, bolts), power cord with integrated switch, and instruction manual.

Part Name	Description
Lamp Base	Weighted metal base for stability
Stem Sections	Adjustable rods for height customization
Lamp Shade	Fabric or metal shade to diffuse light
Bulb Socket	E26/E27 standard socket
Power Cord	With integrated on/off switch
Hardware Pack	Screws, bolts, and tools for assembly

Safety Information

Read all instructions before assembly and use.

Use only with recommended bulb type and max wattage (check label on socket).
Unplug lamp before assembly, cleaning, or bulb replacement.
Place on a stable, level surface away from heat sources and water.
Do not use if cord or plug is damaged.

WARNING! Risk of electric shock. Do not disasseyond user-serviceable parts. Keep away from children.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Included Allen key or screwdriver.

Attach base to the bottom stem section using provided bolts.
Connect additional stem sections by twisting clockwise until secure.
Attach the bulb socket assembly to the top stem section.
Place the lamp shade over the socket and secure with the finial (if included).
Route the power cord along the stem and plug into a standard 120V outlet.
Insert recommended bulb (not included).

Tip: Ensure all connections are tight before use. Do not overtighten.

Specifications

Model: ISJAKT 704.597.16
Type: Floor Lamp
Max Height: As per model (e.g., 60 inches)
Bulb Socket: 1 x E26/E27
Max Wattage: Check label on socket (e.g., 60W max)
Recommended Bulb: LED or CFL for energy efficiency
Power: 120V AC, 60Hz
Cord Length: Standard 6 ft
Materials: Metal base, fabric/metal shade

Operation & Controls

Operation is simple: Plug into outlet, use integrated switch on cord to turn ON/OFF.

Adjustability: Some models allow height adjustment via telescopic stem or angle adjustment of the shade. Refer to specific model features.

Switch Types: Rocker switch or push-button on cord.

Bulb Replacement

Unplug lamp and allow bulb to cool if recently used.
Remove lamp shade if necessary (unscrew finial).
Unscrew old bulb from socket.
Screw in new bulb of recommended type and wattage.
Replace shade and secure finial.
Plug in and test.

CAUTION! Do not exceed maximum wattage to prevent overheating.

Care & Maintenance

Unplug before cleaning. Wipe base and stem with a dry or slightly damp cloth. For fabric shades, use a soft brush or vacuum with brush attachment. Do not immerse in water or use abrasive cleaners.

Storage: Disassemble if possible and store in a dry place.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for duration and conditions. For product support, assembly questions, or parts: Visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off	Replace bulb; ensure plug is secure; toggle switch.
Lamp flickers	Loose bulb; faulty bulb; loose connection	Tighten bulb; try different bulb; check cord connections.
Lamp wobbles	Base not secure; uneven floor	Tighten base screws; place on level surface.
Overheating	Bulb wattage too high	Use bulb at or below max rated wattage.
Shade not secure	Finial loose	Tighten finial clockwise.

Note: For electrical issues not resolved, discontinue use and contact IKEA support.

Support: www.ikea.com