IKEA INNDYR 604.612.15 Bench instructions manual

The IKEA INNDYR 604.612.15 is a sturdy wooden bench designed for indoor use, featuring a solid construction with a natural finish. It requires assembly and comes with all necessary hardware and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Care & Maintenance 5. Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Key components: Bench seat, Legs (4), Support rails, Screws, Allen key.

Part Number	Description	Quantity
100001	Bench seat (solid wood)	1
100002	Leg (solid wood)	4
100003	Support rail (metal)	2
100004	Wood screw 5x50 mm	12
100005	Allen key (5 mm)	1

Note: Check packaging for small parts bag.

Safety Instructions

Read all instructions before assembly. Use on flat, stable surface.

Adult Assembly: Assembly by two adults recommended.
Tool Safety: Use provided tools only; keep away from children.
Weight Limit: Maximum load 200 kg (440 lbs) distributed evenly.
Surface Protection: Use felt pads on legs to prevent floor scratches.

WARNING! Do not stand or jump on bench. Ensure all screws are tightened securely.

Assembly Steps

Follow steps in order. Allow 30-45 minutes for assembly.

Step 1: Lay bench seat upside down on soft surface (e.g., carpet).
Step 2: Attach legs to seat using screws (3 per leg). Do not fully tighten yet.
Step 3: Attach support rails between legs using remaining screws. Ensure rails are level.
Step 4: Tighten all screws firmly with Allen key. Do not overtighten.
Step 5: Turn bench upright and place on flat floor. Check stability.

Tip: If parts don't align, check orientation; all markings should face inward.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

Wood Care: Wipe spills immediately. Use mild soap if needed.
Hardware Check: Tighten screws every 6 months to maintain stability.
Storage: Keep in dry area; avoid direct sunlight or high humidity.

CAUTION! Do not use abrasive cleaners or soak wood.

Specifications

Dimensions: 120 cm L x 40 cm W x 45 cm H (47" x 16" x 18").
Material: Solid wood (seat and legs); metal (support rails).
Finish: Natural wood with clear protective coating.
Weight Capacity: 200 kg (440 lbs).
Assembly Required: Yes (tools included).
Warranty: 10-year limited warranty (see terms).

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven floor or loose screws	Tighten all screws; place on flat surface; adjust leg pads.
Screws not fitting	Wrong part or misaligned holes	Verify part numbers; align holes before inserting screws.
Wood scratches	Rough handling during assembly	Assemble on soft surface; use included touch-up pen for minor scratches.
Missing parts	Packaging error	Contact IKEA support with product number for replacement parts.

Warranty & Support

10-year limited warranty covers material and manufacturing defects. Not covered: damage from misuse, improper assembly, or normal wear.

Support: For missing parts or assembly help, visit www.ikea.com or call 1-888-888-4532. Have product number (604.612.15) ready.

Recycling: Dispose of packaging responsibly; recycle materials per local regulations.