IKEA INGOLF 603.538.38 Chair instructions manual

The IKEA INGOLF 603.538.38 is a sturdy wooden chair designed for durability and everyday use. It features a solid wood frame, a contoured seat for comfort, and a classic design suitable for various room settings. This manual provides essential information for safe assembly, proper use, care, and maintenance of your INGOLF chair. Below are key sections covering parts identification, assembly instructions, safety guidelines, care recommendations, and warranty information.

1. Parts Overview 2. Assembly Instructions 3. Safety Guidelines 4. Specifications 5. Care & Maintenance 6. Weight Limit & Usage 7. Troubleshooting 8. Warranty Information

Parts Overview

Before assembly, identify all parts included in the package. Ensure no parts are missing or damaged.

Part Name	Quantity	Description
Chair Seat	1	Solid wood, pre-drilled for legs
Front Legs	2	Shorter legs with pre-attached fittings
Back Legs	2	Taller legs forming the chair back
Crossbar	1	Connects the two back legs for stability
Wood Dowels	8	For joining legs to seat
Allen Key	1	Tool for tightening fittings
Assembly Screws	8	For securing legs to seat
Instruction Manual	1	This document

Assembly Instructions

Follow these steps carefully to assemble your INGOLF chair correctly. Recommended assembly time: 15-20 minutes.

Prepare Workspace: Clear a flat, clean surface. Lay out all parts and tools.
Attach Front Legs: Insert wood dowels into pre-drilled holes on the bottom of the seat. Align front legs and press firmly into place. Secure with provided screws using the Allen key.
Attach Back Legs: Repeat step 2 for the two back legs. Ensure the curved side faces the rear.
Install Crossbar: Position the crossbar between the two back legs at the designated height. Insert dowels and secure with screws.
Final Check: Ensure all connections are tight and the chair sits level on the floor. Do not overtighten screws.

WARNING! Assemble on a soft surface to avoid scratching the wood. Do not use power tools, as they may damage the fittings.

Safety Guidelines

Your safety is important. Please read and follow these guidelines.

Inspect the chair before each use for loose fittings, cracks, or damage.
Ensure the chair is fully assembled and all parts are securely tightened.
Use the chair only on a flat, stable surface.
Do not stand on the chair or use it as a step ladder.
This chair is designed for one person only.
Keep away from direct heat sources and excessive moisture.

CAUTION! Children should not assemble this product. Adult assembly is required.

Specifications

Product Name: INGOLF Chair
Article Number: 603.538.38
Material: Solid wood (Finish may vary: Birch, Oak, etc.)
Dimensions (approx.): Height: 90 cm, Width: 43 cm, Depth: 48 cm, Seat Height: 46 cm
Weight Capacity: Max 110 kg (242 lbs)
Packaging: Flat-pack, requires assembly
Design: IKEA of Sweden

Care & Maintenance

Proper care will extend the life and appearance of your chair.

Cleaning: Wipe with a clean, dry or slightly damp cloth. Do not use abrasive cleaners, scouring pads, or solvents.
Wood Care: To maintain the finish, you can occasionally treat the wood with a suitable furniture polish or beeswax.
Protection: Use felt pads under the legs to protect your floor. Avoid placing in direct sunlight to prevent fading.
Tightening: Periodically check and tighten screws and fittings as wood may expand/contract with changes in humidity.

Tip: Immediately wipe up any spills to prevent staining.

Weight Limit & Usage

Adhering to the intended use ensures safety and product longevity.

Maximum Load: 110 kg (242 lbs). Do not exceed this limit.
Intended Use: For indoor domestic use as a dining or occasional chair.
Not Suitable For: Commercial use, outdoor use, wet environments (e.g., bathrooms), or as a step stool.
Positioning: Always ensure all four legs are in full contact with the floor. Do not tilt back on the rear legs.

Troubleshooting

Issue	Possible Cause	Solution
Chair wobbles	Uneven floor or loose fittings	Check floor level. Tighten all screws and fittings with the Allen key.
Leg does not fit	Dowel misaligned or damaged	Ensure dowels are fully inserted into the correct holes. Do not force parts.
Screw won't tighten	Stripped thread or cross-threaded	Do not overtighten. If thread is damaged, contact IKEA for a replacement part.
Wood crack or split	Damage during assembly or use	Discontinue use immediately. Contact IKEA for advice or replacement.
Missing part	Part not included or lost	Refer to parts list. Contact IKEA customer service with your article number.

Warranty Information

This IKEA product is covered by the IKEA commercial warranty. The warranty period and terms may vary by country. Please refer to the IKEA warranty leaflet included in your packaging or visit www.IKEA.com for details specific to your local market.

Customer Service: For spare parts, assembly questions, or warranty claims, please contact your local IKEA store or visit the IKEA website. Have your article number (603.538.38) ready.

Recycling: At the end of its life, please recycle the materials according to your local regulations. Wood is a renewable resource.