IKEA INGOLF 294.833.33 Chair instructions manual

The IKEA INGOLF 294.833.33 is a sturdy, solid wood chair with a classic design, suitable for dining tables, desks, or as an occasional seat. It features a curved backrest for comfort, a simple yet durable construction, and a natural wood finish. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Care & Maintenance 5. Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Tools Included

All necessary components and tools are included in the package.

Part/ToolQuantityDescription
Chair Back1Curved solid wood backrest with pre-drilled holes
Chair Seat1Solid wood seat with pre-attached mounting hardware
Chair Legs4Solid wood legs with pre-drilled holes
Cross Brace1Wooden brace for added stability
Wooden Dowels8For joining parts
Allen Key1For tightening screws
Screws & BoltsSetAll necessary fasteners
Assembly Manual1This document

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

  1. Assembly requires two people for stability and safety.
  2. Keep small parts away from children to avoid choking hazards.
  3. Assemble on a soft surface (e.g., carpet) to prevent scratching.
  4. Do not overtighten screws; this may damage the wood.
  5. Check all connections are secure before use.

WARNING! Chair is heavy; lift with care to avoid injury. Ensure all connections are tight and stable before sitting.

Step-by-Step Assembly

Follow these steps in order. Estimated assembly time: 15-20 minutes.

  1. Prepare Parts: Lay out all parts and tools. Identify each component.
  2. Attach Back to Seat: Insert wooden dowels into holes on the seat. Align backrest and press firmly. Secure with provided screws using the Allen key.
  3. Attach Legs: Insert dowels into bottom of seat. Align legs and press into place. Secure each leg with screws from underneath.
  4. Install Cross Brace: Position brace between the two rear legs. Attach using screws provided.
  5. Final Check: Ensure all screws are tight. Gently rock the chair to test stability.

Tip: Do not fully tighten any screw until all parts are aligned.

Care & Maintenance

CAUTION! Do not soak or submerge any part in water. Liquid can damage the wood.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Chair wobblesUneven legs or loose screwsPlace on flat surface. Check and tighten all screws, especially on legs and brace.
Parts don't fitMisaligned dowelsDisassemble and ensure dowels are fully inserted into correct holes before joining.
Screw won't tightenStripped thread or misalignmentDo not force. Remove screw, check hole alignment, and try again gently.
Wood crack or splitOvertightening or defectStop assembly. Contact IKEA customer service for replacement part.
Missing partPackaging errorRefer to parts list. Contact IKEA with article number for missing component.

Note: Do not use if chair is unstable. Re-check assembly steps.

Warranty & Support

IKEA offers a limited warranty. See IKEA terms and conditions for details.

Warranty: Covers material and manufacturing defects. Proof of purchase required.

Support: For assembly help, missing parts, or other inquiries:

Recycling: Dispose of packaging responsibly. Check local recycling guidelines.

IKEA INGOLF 294.833.33 Chair instructions manual © - All Rights Reserved 2025