IKEA INGOLF 094.826.93 Chair instructions manual

The IKEA INGOLF 094.826.93 is a classic wooden chair with a timeless design, crafted from solid birch wood for durability and strength. It features a curved backrest for comfortable seating, a sturdy four-leg construction, and a smooth lacquered finish. The chair is designed for assembly at home and is suitable for dining rooms, kitchens, or home offices. Below are key sections for safety, parts overview, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Assembly Instructions 4. Safety Information 5. Care & Maintenance 6. Weight Capacity & Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part DescriptionQuantityImage Reference
Chair seat (pre-assembled)1A
Chair backrest1B
Front legs (with pre-attached stretcher)1 setC
Rear legs (with pre-attached stretcher)1 setD
Side stretchers (left & right)2E
Wooden dowels (8x40mm)8F
Cam lock screws4G
Allen key (4mm)1H
Instruction manual1-

Tools Required

Only the provided Allen key is needed for assembly. Ensure you have a clean, flat workspace.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

  1. Attach backrest to seat: Insert two wooden dowels (F) into holes on bottom of backrest (B). Align with holes on rear of seat (A) and press firmly together.
  2. Connect front leg assembly: Place front leg set (C) under front of seat. Insert two cam lock screws (G) through seat into leg brackets. Hand-tighten with Allen key (H).
  3. Connect rear leg assembly: Place rear leg set (D) under rear of seat, aligning with backrest. Insert two cam lock screws through seat into leg brackets. Hand-tighten.
  4. Install side stretchers: Slide left side stretcher (E) between front and rear legs on left side. Repeat on right side. Ensure all joints are snug.
  5. Final tightening: Once all parts are aligned, fully tighten all four cam lock screws using the Allen key. Do not overtighten.
  6. Check stability: Gently rock chair to ensure no wobble. Re-tighten if necessary.

WARNING! Assemble on a soft surface to avoid scratching parts. Keep small parts away from children.

Safety Information

CAUTION! Chair is heavy; lift with care using both hands. Assemble with assistance if needed.

Care & Maintenance

Clean with a damp cloth and mild soap. Wipe dry immediately.

Tip: Protect from prolonged sunlight to prevent fading.

Weight Capacity & Specifications

Troubleshooting

IssuePossible CauseSolution
Chair wobblesLegs not fully tightened or uneven floorTighten all cam lock screws; check floor level; adjust leg glides if available.
Backrest feels looseDowels not fully insertedDisassemble and re-insert dowels firmly; ensure no debris in holes.
Screws won't tightenCross-threaded or misalignedLoosen, realign parts, and re-tighten carefully.
Scratches on woodAssembly on hard surface or during useUse touch-up pen (sold separately) for minor scratches; avoid dragging.
Missing partPackaging errorContact IKEA customer service with product number (094.826.93).

Warranty & Support

IKEA limited warranty applies. See IKEA terms of guarantee for details.

Note: This manual is part of the product. Keep for future reference.

IKEA INGOLF 094.826.93 Chair instructions manual © - All Rights Reserved 2025