IKEA INGOLF 001.217.66 Bar Stool instructions manual

The IKEA INGOLF 001.217.66 is a classic wooden bar stool featuring a solid beech frame, a contoured seat for comfort, and a sturdy four-leg design. It requires assembly and is designed for indoor use at kitchen counters, bars, or workstations. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Care & Maintenance 5. Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Check packaging for small hardware bags.

Part Description	Quantity	Image Ref.
Seat (Beech wood)	1	A
Legs (Beech wood)	4	B
Cross braces (Beech wood)	4	C
Wooden dowels	8	D
Allen key	1	E
Hex-head screws	8	F
Plastic screw covers	8	G

Note: Some parts may be pre-assembled. Do not use power tools.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Work Area: Use a clean, flat surface with enough space.
Lifting: Stool is heavy; lift with your legs, not your back.
Assembly: Tighten all screws firmly but do not overtighten.
Stability: Ensure all legs touch the floor evenly before use.
Weight Limit: Maximum load 110 kg (242 lbs).

WARNING! Do not stand on the stool. Use only for seating. Check stability periodically.

Assembly Steps

Estimated assembly time: 20-30 minutes. Follow steps in order.

Attach Legs to Seat: Insert wooden dowels (D) into pre-drilled holes on underside of seat (A). Align legs (B) and press firmly.
Secure Legs: Using the Allen key (E), insert hex-head screws (F) through braces (C) into legs. Tighten securely.
Attach Cross Braces: Connect the four cross braces (C) between legs using remaining screws. Ensure symmetry.
Final Check: Turn stool upright. Press down gently to ensure all joints are tight. Insert plastic screw covers (G).
Adjustment: If stool wobbles, check that all screws are tight and legs are fully inserted.

Tip: Assemble near where the stool will be used to avoid moving it after assembly.

Care & Maintenance

Proper care will extend the life of your stool.

Cleaning: Wipe with a damp cloth. Dry immediately. Do not soak or use abrasive cleaners.
Wood Care: Treat with IKEA wood care products if desired. Avoid direct sunlight and heat sources.
Inspection: Check screws every 3 months and tighten if necessary.
Repairs: Use only original IKEA parts for replacements.

CAUTION! Do not use solvents or ammonia-based cleaners.

Specifications

Product Name: INGOLF Bar Stool
Article Number: 001.217.66
Material: Solid beech, Clear acrylic lacquer
Dimensions: Height: 65 cm (25 5/8"), Seat height: 65 cm (25 5/8"), Width: 34 cm (13 3/8"), Depth: 39 cm (15 3/8")
Weight: 4.5 kg (9.9 lbs)
Packaging: Flat-pack. Recyclable cardboard.
Designer: IKEA of Sweden

Troubleshooting

Issue	Possible Cause	Solution
Stool wobbles	Uneven floor; loose screws; legs not fully inserted	Tighten all screws; check leg insertion; use on level surface.
Screw won't tighten	Cross-threaded; wrong screw	Remove screw, realign, and restart. Ensure correct screw from parts list.
Wood crack or split	Overtightening; manufacturing defect	Stop assembly. Contact IKEA customer service for part replacement.
Missing part	Packaging error	Check all bags and packaging material. Contact IKEA with article number for missing parts.
Seat feels unstable	Dowels not fully seated	Disassemble and re-insert dowels with firm pressure before attaching legs.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or www.IKEA.com for details.

Customer Service: For missing parts, assembly help, or returns, contact your local IKEA store or visit IKEA customer service online.

Recycling: Dispose of packaging responsibly. Wood parts can be recycled or disposed of according to local regulations.

Safety Notice: This product meets applicable safety standards. Retain this manual for future reference.