IKEA INGATORP 094.828.10 Table instructions manual

The IKEA INGATORP 094.828.10 is an extendable dining table with a solid wood frame and a durable, easy-to-clean surface. It features a practical drop-leaf design that allows the table to be expanded for additional guests and folded down to save space. Below are key sections for safety, features, assembly, setup, care, and troubleshooting.

Features at a Glance

Key components: Solid wood frame, extendable tabletop with drop-leaf mechanism, adjustable feet for stability on uneven floors.

Package Contents & Tools

Unpack all parts and verify contents before assembly.

1. Tabletop: 1 piece (may be in multiple sections for extended version).
2. Table Frame: 1 set (legs and aprons).
3. Extension Leaf: 1 piece (if applicable).
4. Hardware Package: Contains screws, cam locks, dowels, and adjustable feet.
5. Assembly Tools: Usually includes an Allen key and possibly a screwdriver.
6. Instruction Manual: This document.

NOTE: Check for any damage during shipping. Contact IKEA customer service if parts are missing or damaged.

Safety Instructions

Follow these guidelines to ensure safe assembly and use.

1. Assemble on a soft, clean surface to avoid scratching the tabletop.
2. Use two people for assembly, as some parts are heavy.
3. Ensure all screws and cam locks are fully tightened before use.
4. Do not exceed the maximum weight capacity of 110 lbs.
5. Keep away from direct heat sources and excessive moisture.
6. Adjust feet to ensure table is stable and does not wobble.

WARNING! Table is heavy; lift with care to avoid injury. Ensure the table is fully assembled and stable before placing items on it.

Assembly Instructions

Estimated assembly time: 45-60 minutes. Follow steps in order.

1. Prepare Workspace: Clear an area large enough to lay out all parts.
2. Attach Legs to Frame: Connect the legs to the side aprons using the provided screws and Allen key.
3. Install Cross Braces: Secure any cross braces between the legs for added stability.
4. Attach Tabletop: Place the tabletop upside down on a soft surface. Position the assembled frame onto the tabletop, aligning the pre-drilled holes.
5. Secure Tabletop: Insert cam locks into their designated holes and tighten with the Allen key to secure the frame to the tabletop.
6. Install Adjustable Feet: Screw the adjustable feet into the bottom of each leg.
7. Final Check: Turn the table right-side up. Check that all connections are tight and the table is stable.

CAUTION! Do not overtighten screws, as this may strip the wood. Assemble on a flat surface to ensure proper alignment.

Setup & Adjustment

After assembly, place the table in its desired location.

1. Leveling: If the floor is uneven, adjust the feet by turning them clockwise to raise or counterclockwise to lower until the table is stable.
2. Positioning: Ensure there is adequate space around the table for chairs and movement, especially when extended.
3. Initial Use: Allow the table to acclimate to room temperature and humidity for 24 hours before heavy use.

Tip: Use a spirit level to check that the tabletop is perfectly horizontal after adjusting the feet.

Specifications

• Product Name: INGATORP
• Article Number: 094.828.10
• Color: Black-Brown (example)
• Material: Tabletop: Particleboard, foil; Frame: Solid wood
• Dimensions (LxWxH): 47 1/4x31 1/2x29 1/2 "
• Extended Length: Up to 70 7/8 "
• Net Weight: Approximately 55 lbs
• Max Load: 110 lbs
• Package Weight: Approximately 60 lbs
• Designer: IKEA of Sweden

Extending & Folding the Table

To accommodate more people, extend the table leaf.

1. Clear the Area: Remove all items from the tabletop.
2. Release Lock: Locate the locking mechanism under the table (usually a lever or latch).
3. Extend Leaf: Gently pull the extension leaf outward until it clicks into the fully extended position. Ensure the support leg (if present) swings down and locks.
4. Secure: Verify the leaf is flush with the main tabletop and the lock is engaged.
5. To Fold: Lift the leaf slightly to release the lock, fold it back down, and secure the locking mechanism.

WARNING! Do not force the mechanism. Ensure the support leg is properly deployed when extended to prevent tipping.

Care & Maintenance

Proper care will extend the life of your table.

• Cleaning: Wipe with a damp, soft cloth. Use a mild detergent if needed. Dry immediately.
• Stains: For stubborn stains, use a recommended wood cleaner. Test on an inconspicuous area first.
• Protection: Use coasters, placemats, and tablecloths to prevent scratches and heat marks.
• Avoid: Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid prolonged exposure to direct sunlight.

CAUTION! Never soak the table with water or cleaning liquids. Do not place hot pots or pans directly on the surface.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at www.ikea.com.

Contact: For warranty claims or service, contact IKEA customer support at 1-888-888-4532 or visit your local IKEA store.

Troubleshooting

Replacement Parts: For missing or damaged parts, contact IKEA customer service with your article number (094.828.10).

Service: 1-888-888-4532; www.ikea.com