IKEA INGATORP 004.231.08 Table instructions manual

The IKEA INGATORP 004.231.08 is an extendable dining table with a solid wood construction, featuring a fold-out leaf for additional seating capacity. Designed for easy assembly with included hardware, it offers a classic style suitable for various dining spaces. Below are key sections for safety, parts identification, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Extending the Table 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Key components: Table top, Table legs, Extension leaf, Support bracket, Metal screws, Wooden dowels, Allen key.

Part Name	Quantity	Description
Table top (main)	1	Solid wood main table surface
Extension leaf	1	Fold-out section for table extension
Table leg	4	Solid wood legs with pre-drilled holes
Support bracket	2	Metal brackets for leaf support
Wooden dowel	8	For joining table parts
Screw A (large)	16	For securing legs to table frame
Screw B (small)	12	For attaching brackets and hardware
Allen key	1	Tool for tightening screws

Safety Information

Read all instructions before assembly. Ensure a clean, spacious work area.

Use proper tools: Only use the provided Allen key; do not overtighten screws.
Lift with care: Table top is heavy; use two people to avoid strain or damage.
Check stability: Ensure all screws are tight and table does not wobble before use.
Keep away from heat: Avoid placing near radiators or direct sunlight to prevent warping.

WARNING! Choking hazard: Keep small hardware away from children. Assemble on a soft surface to avoid scratching.

Assembly Instructions

Follow steps in order. Allow 30-45 minutes for assembly.

Attach legs to frame: Align leg with corner brackets; insert and tighten Screw A (4 per leg).
Connect table top: Place top upside down on soft surface; align with leg assembly.
Insert dowels: Apply glue to wooden dowels; insert into pre-drilled holes on underside of table top.
Secure top to frame: Lower frame onto dowels; tighten with Screw B through brackets.
Install extension mechanism: Attach support brackets to underside using Screw B (see diagram).
Check alignment: Ensure all parts are flush; tighten any loose screws.
Turn table upright: Carefully flip table with assistance; place on level floor.

CAUTION! Do not force parts; if something doesn't fit, check alignment. Ensure table is stable before use.

Extending the Table

To use the extension leaf:

Clear the area: Remove all items from table surface.
Pull apart: Grasp both sides of table top and gently pull outward; the leaf will lower into place.
Lock in position: Push down on leaf until it clicks flush with main table top.
To close: Lift leaf slightly, push table halves together, and ensure leaf folds up completely.

Tip: Extend and close the table a few times when empty to ensure smooth operation.

Care & Maintenance

Cleaning: Wipe with a damp cloth; dry immediately. Use mild soap if needed.
Stains: For stubborn stains, use a wood cleaner suitable for finished surfaces.
Protection: Use coasters and placemats to prevent heat marks and scratches.
Maintenance: Periodically check and tighten screws to maintain stability.

CAUTION! Do not use abrasive cleaners, solvents, or steel wool. Avoid excessive moisture.

Specifications

Model: INGATORP 004.231.08
Material: Solid wood (table top and legs)
Finish: Clear lacquer
Dimensions (closed): 47" L x 31" W x 29" H
Dimensions (extended): 70" L x 31" W x 29" H
Weight Capacity: 220 lbs (evenly distributed)
Seating Capacity: 4-6 persons (closed), 6-8 persons (extended)
Warranty: Limited 10-year warranty (see terms)

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor or loose screws	Check floor level; tighten all leg and frame screws.
Leaf does not fold smoothly	Misaligned brackets or debris	Check bracket alignment; clean tracks; lubricate with silicone spray if needed.
Gap between leaf and table top	Leaf not fully locked	Lift and lower leaf again until flush; check support brackets.
Screws not tightening	Stripped threads or misalignment	Do not force; remove screw, check hole, and reinsert carefully.
Scratches on surface	Assembly on hard surface	Use felt pads under objects; touch up with matching wood marker.

Note: For missing parts or damage, contact IKEA customer service with product number.

Warranty & Support

IKEA limited warranty covers manufacturing defects for 10 years from date of purchase. Warranty does not cover damage from improper assembly, accidents, or normal wear. Keep your receipt as proof of purchase.

Contact: For assistance, visit www.ikea.com or call IKEA customer support at 1-888-888-4532. Have product number (004.231.08) ready.