IKEA IDANÄS 193.900.80 Bed Frame instructions manual

The IKEA IDANÄS 193.900.80 is a modern, sturdy bed frame designed for durability and style. It features a slatted bed base for mattress support, underbed storage options, and a clean Scandinavian design. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Adjusting & Leveling 6. Storage Features 7. Care & Maintenance 8. Disassembly & Moving 9. Warranty Information 10. Troubleshooting

Parts & Hardware

All components included in the package. Check against this list before assembly.

Part Name	Quantity	Description
Side Rails (Long)	2	Main longitudinal frame pieces
Headboard Panel	1	Upright panel for head end
Footboard Panel	1	Lower panel for foot end
Slatted Bed Base	1 set	Wooden slats for mattress support
Center Support Beam	1	Additional middle support (if applicable)
Wooden Dowels	12	For connecting frame pieces
Cam Lock Nuts	8	For securing connections
Hex Key (Allen Wrench)	1	Included tool for assembly
Wood Screws	16	For attaching slats and supports
Plastic Glides	4	Protective feet for floor

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Assemble on a soft, clean surface to avoid scratching parts.
Use two people for lifting and positioning heavy components.
Ensure all screws and connectors are fully tightened before use.
Check that the bed frame is stable and level on the floor.

WARNING! Do not exceed the maximum weight limit (see Specifications). Ensure the mattress size matches the bed frame dimensions. Keep small children away during assembly.

Assembly Steps

Follow these steps in order for proper assembly. Estimated time: 45-60 minutes.

Prepare: Unpack all parts and hardware. Identify each piece using the included guide.
Connect Headboard & Footboard: Attach side rails to headboard and footboard using wooden dowels and cam locks. Tighten with hex key.
Install Center Support: If included, attach the center support beam between side rails for added stability.
Attach Slatted Bed Base: Place slats across the frame, spacing evenly. Secure with provided screws at each end.
Add Glides: Screw plastic glides into the bottom of each leg to protect your floor.
Final Check: Ensure all connections are tight. Gently shake the frame to test stability.

CAUTION! Do not overtighten screws, as this may strip the wood. If a part is damaged, do not use it—contact IKEA for replacement.

Specifications

Model: IDANÄS 193.900.80
Bed Size: Queen (60" x 80" / 152cm x 203cm)
Frame Material: Solid pine, particleboard, fiberboard
Finish: White stain
Max Load: 600 lbs (272 kg) distributed evenly
Height (to top of slats): 12 inches (30.5 cm)
Underbed Clearance: 8 inches (20 cm) for storage
Weight of Frame: 55 lbs (25 kg)
Mattress Type: Compatible with most standard mattresses (no box spring needed)

Adjusting & Leveling

If the bed frame wobbles or is uneven, follow these steps.

Check Floor: Ensure the floor is level. Use a spirit level on the frame.

Adjust Glides: Some glides may be adjustable; turn clockwise to raise, counterclockwise to lower.

Tighten Connections: Re-check all cam locks and screws; tighten if loose.

Add Shims: If necessary, place thin, sturdy shims under low legs (use wood or plastic, not paper).

Storage Features

The design allows for underbed storage. Maximize space safely.

Use low-profile storage bins that fit within the 8-inch clearance.
Do not store heavy items that could stress the slats or frame.
Ensure stored items do not block ventilation around the mattress.
Periodically check that stored items are not pressing against the slats.

Tip: Label bins for easy access. Avoid storing liquids or perishables under the bed.

Care & Maintenance

Proper care extends the life of your bed frame.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Protection: Use a mattress protector to guard against spills and stains.
Inspection: Every 6 months, check and tighten any loose screws or connectors.
Slats: Ensure slats remain evenly spaced and securely attached.

CAUTION! Do not expose to direct sunlight or high humidity for extended periods. Never use wax or polish on the finish.

Disassembly & Moving

To disassemble for moving or storage, reverse the assembly steps.

Remove mattress and all bedding.
Unscrew slats and set aside.
Loosen cam locks with hex key and gently separate side rails from headboard/footboard.
Pack all hardware in a labeled bag and tape to a large component.
Protect wooden surfaces with blankets or bubble wrap during transport.

WARNING! Disassemble carefully to avoid damaging dowel holes. Two people are recommended.

Warranty Information

IKEA Limited Warranty: 10 years from date of purchase. Covers manufacturing defects in materials and workmanship under normal household use. Proof of purchase required. Does not cover damage from improper assembly, accidents, modifications, or commercial use. For warranty service, contact IKEA customer support with model number and receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Squeaking noises	Loose connections or wood friction	Tighten all screws and cam locks. Apply paraffin wax to dowels if needed.
Frame feels unstable	Uneven floor or loose parts	Level the frame using glides or shims. Re-tighten all connections.
Slats sliding or falling	Screws not secure or missing	Ensure each slat end is screwed firmly into the side rail.
Difficulty assembling dowels	Misalignment or debris in holes	Check alignment; clean holes; do not force—reposition parts gently.
Cracks in wood	Overtightening or impact damage	Stop using if crack affects stability. Contact IKEA for part replacement.

Support: For missing parts or further assistance, visit www.ikea.com or call 1-800-434-4532. Have model number (193.900.80) ready.