IKEA IDANÄS 104.596.77 Bed Frame instructions manual

The IKEA IDANÄS 104.596.77 is a sturdy, modern bed frame designed for durability and style. It features a solid wood construction, slatted bed base for mattress support, underbed storage options, and a clean Scandinavian design. Below are key sections for safety, assembly, parts list, installation steps, care instructions, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Assembly Tips 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Tools Included

All components needed for assembly are included in the package. Check all parts before starting.

Part Number	Description	Quantity
100001	Bed side rail (left)	1
100002	Bed side rail (right)	1
100003	Headboard	1
100004	Footboard	1
100005	Center support beam	1
100006	Slatted bed base	1 set
100007	Wooden slats	14
200001-200020	Screws, bolts, and washers	As per pack
300001	Allen key (hex key)	1
300002	Combination wrench	1

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Assemble on a clean, flat surface to prevent instability.
Use two people for lifting and assembly to avoid injury.
Keep small parts away from children during assembly.
Tighten all bolts and screws securely to ensure frame stability.
Check that all components are undamaged before assembly.

WARNING! Do not exceed the maximum weight limit of 300 kg (661 lbs). Ensure the bed frame is properly assembled before use.

Step-by-Step Assembly

Follow these steps in order for proper assembly.

Prepare Parts: Lay out all parts and tools. Identify each component using the parts list.
Attach Headboard & Footboard: Connect the headboard (100003) and footboard (100004) to the side rails (100001, 100002) using bolts (200001-200004). Hand-tighten initially.
Install Center Support Beam: Secure the center support beam (100005) to the side rails using screws (200005-200008). Ensure it is centered.
Place Slatted Bed Base: Position the slatted bed base frame (100006) onto the support rails. It should click into place.
Add Wooden Slats: Lay the wooden slats (100007) evenly across the bed base frame. Space them according to the markings.
Final Tightening: Go back and fully tighten all bolts and screws using the provided tools. Do not overtighten.
Check Stability: Gently shake the bed frame to ensure it is stable and does not wobble.

CAUTION! Do not skip any steps. Incorrect assembly can lead to instability and potential injury.

Assembly Tips

Work Area: Choose a room with enough space to lay out all parts.
Tool Check: Ensure the Allen key and wrench fit the bolts properly before starting.
Team Lift: The headboard and side rails are heavy; lift with a partner.
Sequence: Follow the step numbers in the manual precisely.
Final Inspection: After assembly, check all connections and ensure no parts are missing or loose.

Specifications

Model: IDANÄS 104.596.77
Bed Size: Queen (60" x 80" / 152 cm x 203 cm)
Material: Solid birch wood, stained
Color: Dark brown
Max Load: 300 kg (661 lbs) evenly distributed
Height (from floor): 40 cm (15.7 inches)
Underbed Clearance: 25 cm (9.8 inches) for storage
Weight (packaged): 45 kg (99 lbs)
Warranty: 10-year limited warranty

Care & Maintenance

Proper care will extend the life of your bed frame.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
Wood Care: To maintain the finish, use a wood polish recommended for stained birch every 6-12 months.
Regular Checks: Periodically check and tighten bolts and screws, especially during the first few months of use.
Slat Inspection: Ensure wooden slats are intact and not cracked. Replace if damaged.
Moisture: Keep away from excessive humidity and direct heat sources to prevent warping.

CAUTION! Do not use wet cloths for cleaning; excess moisture can damage the wood.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed frame wobbles	Loose bolts/screws	Tighten all connections with the provided tools.
Squeaking noise	Wood rubbing or loose joints	Check and tighten all bolts. Apply a small amount of furniture wax to rubbing points.
Slats sliding out	Slats not properly seated	Re-position slats evenly and ensure they are within the frame guides.
Difficulty assembling parts	Parts misaligned	Disassemble the step, ensure parts are correctly oriented, and reassemble.
Missing parts	Packaging error	Contact IKEA customer service with your receipt and product number.

Note: If problems persist, disassemble and reassemble following the manual carefully.

Warranty & Support

IKEA IDANÄS bed frame comes with a 10-year limited warranty covering material and manufacturing defects under normal household use.

Warranty Conditions: Proof of purchase required. Does not cover damage from improper assembly, accidents, misuse, or commercial use.

Support: For missing parts, assembly help, or warranty claims:

Visit: www.ikea.com
Contact IKEA customer service: 1-888-888-4532
Visit your local IKEA store with your receipt.

Recycling: At end of life, disassemble and recycle materials according to local regulations.