IKEA IDANÄS 104.589.08 Bed Frame instructions manual

The IKEA IDANÄS 104.589.08 is a sturdy, modern bed frame designed for durability and style. It features a slatted bed base for mattress support, underbed storage options, and a clean Scandinavian design. This manual covers assembly, safety, care, and troubleshooting to ensure proper setup and long-lasting use.

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Bed frame sides (headboard and footboard), Side rails, Slatted bed base, Support legs, Connector bolts, washers, and Allen key.

Safety Information

Read all instructions before assembly. Use on stable, level floor.

1. Assembly requires two people due to size and weight.
2. Ensure all bolts are tightened securely; check periodically.
3. Do not exceed maximum weight capacity (see Specifications).
4. Keep small parts away from children during assembly.

WARNING! Improper assembly can cause injury or damage. Follow steps in order.

Assembly Instructions

Assemble in a clear space near final location.

1. Attach support legs to side rails (B1/B2) using bolts (F).
2. Connect headboard (A1) and footboard (A2) to side rails using bolts.
3. Install center support beam (D) across middle of frame.
4. Place slatted bed base (C) onto frame, ensuring slats rest on supports.
5. Tighten all bolts with Allen key (G). Do not overtighten.
6. Check stability; adjust legs if needed for leveling.

CAUTION! Lift with legs, not back. Use protective gloves if needed.

Specifications

• Model: IDANÄS 104.589.08
• Bed Size: Queen (60" x 80")
• Material: Particleboard, fiberboard, plastic, steel
• Finish: White, smooth
• Max Weight Capacity: 600 lbs (distributed)
• Underbed Clearance: 8 inches (with standard legs)
• Slat Type: Plywood, pre-assembled with fabric
• Tool Required: Allen key (included)
• Warranty: Limited 10-year against manufacturing defects

Adjusting & Leveling

If bed wobbles or is uneven, adjust support legs.

Leg Adjustment: Turn legs clockwise to raise, counterclockwise to lower. Use level tool on frame to check.

Slat Tension: Ensure slats are evenly spaced and centered on rails. Do not bend or force.

Re-tightening: Check bolts after first week of use, then every 6 months.

Mattress Compatibility

Compatible with most standard queen mattresses (innerspring, memory foam, hybrid).

1. Ensure mattress dimensions match bed frame (60" x 80").
2. Place mattress centered on slatted base.
3. Use a mattress protector to prevent wear on slats.
4. Do not use mattress thicker than 14 inches without checking clearance.

Tip: Allow new mattress to expand fully before making bed.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

1. Dust frame regularly with soft, dry cloth.
2. For stains, use mild soap and water; dry immediately.
3. Do not use abrasive cleaners or solvents.
4. Check bolt tightness every 6 months.

CAUTION! Avoid excessive moisture; do not steam clean.

Disassembly & Moving

To disassemble, reverse assembly steps.

1. Remove mattress and slatted base.
2. Loosen bolts in reverse order of assembly.
3. Keep all parts and hardware together in labeled bags.
4. When moving, protect frame edges with blankets or cardboard.

WARNING! Disassemble with two people. Do not stand on frame during disassembly.

Warranty Information

IKEA Limited Warranty: 10 years from date of purchase against manufacturing defects. Does not cover damage from improper assembly, accidents, or normal wear. Keep receipt as proof of purchase. For claims, contact IKEA customer service with model number and receipt.

Troubleshooting

Support: For missing parts or assistance, visit IKEA store or www.ikea.com.

Phone: 1-888-888-4532 (IKEA US customer service)