IKEA IDANÄS 804.588.15 Nightstand instructions manual

The IKEA IDANÄS 804.588.15 is a modern nightstand featuring a clean design, durable construction, and practical storage. It includes a drawer for bedside essentials, an open shelf for books or decorative items, and a sturdy frame. Assembly is required. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Product Specifications 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

All components included in the package. Check contents before starting assembly.

Part Name	Quantity	Description
Side Panel (Left)	1	Main side panel with pre-drilled holes
Side Panel (Right)	1	Main side panel with pre-drilled holes
Top Panel	1	Tabletop surface
Bottom Shelf	1	Fixed lower shelf
Drawer Front	1	Drawer front panel
Drawer Sides	2	Left and right drawer sides
Drawer Back	1	Rear panel of drawer
Drawer Bottom	1	Drawer base panel
Cam Lock Nuts	8	Plastic locking fasteners
Screws	20	Various lengths for assembly
Wooden Dowels	10	For aligning panels
Drawer Glides	2	Metal slides for smooth operation
Allen Key	1	Tool for tightening screws

Safety Information

Read all instructions before assembly. Ensure safe handling and proper setup.

Work on a clean, flat surface to avoid damage to parts.
Keep small hardware away from children and pets.
Use provided tools only; do not overtighten screws.
Assemble with another person for stability with larger panels.

WARNING! Furniture can tip over if not properly anchored or overloaded. Secure to wall if included in kit. Do not stand or climb on the nightstand.

Assembly Instructions

Follow steps in order. Allow 30-45 minutes for assembly.

Prepare: Unpack all parts and hardware. Identify each piece using the parts list.
Frame Assembly: Insert wooden dowels into side panels. Attach bottom shelf to side panels using cam lock nuts. Tighten with Allen key.
Attach Top: Place top panel onto assembled frame. Secure from underneath with provided screws.
Drawer Assembly: Connect drawer sides to front and back panels using screws. Slide drawer bottom into grooves and secure.
Install Drawer Glides: Attach glides to inside of nightstand frame and outer sides of drawer. Test drawer movement.
Final Check: Ensure all screws are tight and drawer opens smoothly. Wipe clean with dry cloth.

Tip: Do not fully tighten screws until all parts are aligned. Use a soft mallet to tap dowels into place if needed.

Product Specifications

Product Name: IDANÄS Nightstand
Article Number: 804.588.15
Color: White/Birch effect
Dimensions (W x D x H): 18.1" x 15.7" x 23.6" (46 cm x 40 cm x 60 cm)
Drawer Interior Dimensions: 14.2" x 13.8" x 5.9" (36 cm x 35 cm x 15 cm)
Weight: 22 lbs (10 kg)
Max Load Drawer: 11 lbs (5 kg)
Max Load Top: 33 lbs (15 kg)
Material: Particleboard, Fiberboard, Plastic, Steel
Finish: Foil, Acrylic paint
Tools Required: Allen key (included)

Care & Maintenance

Proper care extends product life. Use recommended cleaning methods.

Wipe surfaces with a soft, damp cloth. Dry immediately.
Use mild soap solution for stubborn stains; avoid abrasive cleaners.
Do not place hot items or wet glasses directly on surface.
Periodically check and tighten screws to maintain stability.

CAUTION! Do not use solvents, ammonia-based cleaners, or scouring pads. Avoid excessive moisture and direct sunlight to prevent warping or fading.

Troubleshooting

Issue	Possible Cause	Solution
Drawer sticks or won't close	Misaligned glides or overloading	Realign glides; ensure drawer is level; reduce weight.
Wobbly frame	Loose screws or uneven floor	Tighten all cam locks and screws; place on level surface.
Missing hardware	Not included or lost during unpacking	Contact IKEA for replacement parts kit.
Scratches on surface	Assembly damage or improper handling	Use touch-up pen (available from IKEA); avoid dragging parts.
Difficulty inserting dowels	Misalignment or debris in holes	Clean holes; align panels carefully before pressing.

Note: If parts are damaged or defective, do not assemble. Contact IKEA support.

Warranty & Support

IKEA limited warranty applies. See warranty card for details.

Warranty Period: 10 years for structural frame; 1 year for moving parts (drawer glides).
Coverage: Manufacturing defects under normal household use.
Exclusions: Damage from improper assembly, accidents, misuse, or commercial use.
Support: Visit www.ikea.com for assembly videos, spare parts, or contact customer service at 1-888-888-4532.
Recycling: Disassemble and recycle materials according to local regulations.

Important: Keep your receipt as proof of purchase for warranty claims.