The IKEA IDANÄS 204.588.42 is a freestanding wardrobe system designed for flexible storage solutions. It features a sturdy metal frame, adjustable shelves, multiple hanging rails, and optional sliding or hinged doors. Below are key sections for safety, parts identification, assembly, installation, use, care, and troubleshooting.
Key components: Main frame panels, back panel, shelves, hanging rails, door panels (if included), connectors, screws, cam locks, dowels, wall attachment hardware.
| Part Name | Description |
|---|---|
| Main Frame Panels | Side, top, and bottom panels forming the wardrobe structure |
| Back Panel | Fiberboard panel providing stability |
| Shelves | Adjustable shelves for folded items |
| Hanging Rails | Adjustable rails for clothes on hangers |
| Door Panels (Optional) | Sliding or hinged doors (purchased separately) |
| Connectors & Cam Locks | For securing panels together |
| Dowel Pins | For alignment during assembly |
| Wall Attachment Kit | Brackets and screws for securing to wall |
| Adjustable Feet | For leveling on uneven floors |
| Door Hardware | Hinges, handles, or sliding track (if applicable) |
Read all instructions before assembly. Ensure a safe workspace.
WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this wardrobe to the wall.
Unpack and verify all parts against the included parts list.
CAUTION! Do not discard any packaging until assembly is complete and all parts are verified.
Follow the numerical steps in the included pictorial guide. General sequence:
Tip: Do not fully tighten cam locks until the entire frame is squared up.
For hinged doors: Attach hinges to door panel first, then mount to the frame. Adjust hinge screws for proper alignment and closing.
For sliding doors: Install the upper track first, then the lower guide. Insert doors by tilting them into the upper track and lowering into the bottom guide. Use adjusting screws at the bottom to align doors vertically.
WARNING! Ensure doors are properly aligned and secured to prevent pinching or unexpected movement.
Shelves: Lift and reposition on shelf supports (pins or brackets). Ensure the shelf is level and fully seated on all supports.
Hanging Rails: To adjust height, lift the rail off its brackets, reposition brackets, and replace the rail. For double hanging, install a second set of brackets and a shorter rail below.
Clean exterior with a damp cloth and mild detergent. Wipe dry immediately. Do not use abrasive cleaners.
For interior, vacuum occasionally to remove dust. Tighten screws and cam locks periodically if the unit becomes loose.
CAUTION! Avoid excessive moisture. Do not place wet items directly on shelves.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Wardrobe wobbles | Uneven floor, loose connectors | Re-level adjustable feet. Check and tighten all cam locks and screws. |
| Doards not closing properly | Misaligned hinges or tracks | Adjust hinge screws or door guide screws for alignment. |
| Shelf sags | Overloaded or not fully seated | Reduce weight to under 15kg. Ensure shelf is correctly placed on all supports. |
| Difficulty assembling connectors | Parts misaligned | Disassemble step, ensure all dowels are fully inserted before tightening cam locks. |
| Back panel bulging | Not fully seated in grooves | Gently tap panel into the grooves around the entire perimeter before final securing. |
Missing Parts: Contact IKEA customer service with article number (204.588.42).
Service: Visit www.ikea.com or contact your local IKEA store for support.