IKEA IDANÄS 004.589.56 Bed Frame instructions manual

The IKEA IDANÄS 004.589.56 is a sturdy bed frame designed for durability and style, featuring a solid wood construction, slatted bed base for mattress support, underbed storage options, and a timeless Scandinavian design. Below are key sections for safety, assembly, care, and troubleshooting.

1. Parts & Components 2. Tools Required 3. Assembly Instructions 4. Safety Information 5. Care & Maintenance 6. Weight Capacity 7. Mattress Compatibility 8. Disassembly & Moving 9. Warranty Information 10. Troubleshooting

Parts & Components

Key components: Solid wood bed frame, slatted bed base, side rails, center support beam, wooden slats, assembly hardware, and instructions.

Part	Description
Bed frame panels	Solid wood headboard, footboard, and side panels
Slatted bed base	Adjustable wooden slats for mattress support
Center support beam	Provides additional stability for the bed frame
Assembly hardware	Includes screws, bolts, washers, and Allen key
Side rails	Connects headboard and footboard
Wooden slats	Supports mattress and allows ventilation
Underbed storage	Optional storage boxes or drawers (sold separately)
Protective caps	Covers screw heads for a finished look
Instruction manual	Step-by-step assembly guide
Warranty card	Product warranty information

Tools Required

All necessary tools are included in the package. Additional tools may be helpful.

Included Allen key for tightening bolts.
Optional: Phillips screwdriver for easier assembly.
Optional: Rubber mallet for gentle adjustments.
Optional: Measuring tape for positioning.

WARNING! Use only the provided hardware. Do not overtighten screws to avoid damaging the wood.

Assembly Instructions

Follow these steps carefully for proper assembly. Recommended assembly time: 45-60 minutes.

Unpack all parts and verify against the parts list.
Attach side rails to headboard using provided bolts.
Connect footboard to side rails in the same manner.
Install center support beam across the middle of the frame.
Place wooden slats across the frame, spacing them evenly.
Secure slats with included clips or screws.
Double-check all connections are tight and secure.
Place mattress on the assembled bed frame.

CAUTION! Assemble on a soft surface to avoid scratching the wood. Two people recommended for assembly.

Safety Information

Weight Limit: Maximum weight capacity 600 lbs (272 kg) distributed evenly.
Age Recommendation: Not recommended for children under 6 years.
Stability: Ensure all bolts are tightened regularly to maintain stability.
Placement: Keep away from direct heat sources and excessive moisture.
Mattress: Use with recommended mattress sizes only.
Assembly: Follow instructions precisely; do not skip steps.
Maintenance: Check tightness of connections every 3 months.
Moving: Disassemble before moving to prevent damage.

Care & Maintenance

Proper care will extend the life of your bed frame.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.

Wood Care: Use wood polish specifically for solid wood furniture every 6 months.

Inspection: Regularly check for loose bolts or screws and tighten as needed.

Protection: Use felt pads under bed legs to protect flooring.

Weight Capacity

The bed frame is designed to support standard mattress weights plus occupants.

Maximum distributed weight: 600 lbs (272 kg).
Includes combined weight of mattress, bedding, and sleepers.
Center support beam must be properly installed for weight distribution.
Do not exceed weight limit to prevent structural damage.

Tip: For heavier mattresses (e.g., memory foam), ensure slats are properly spaced and secured.

Mattress Compatibility

Compatible with most standard mattress types and sizes.

Supported sizes: Twin, Full, Queen, King (check specific model).
Compatible with: Innerspring, memory foam, latex, hybrid mattresses.
Ensure mattress dimensions match bed frame interior dimensions.
Use with box spring optional (not required with slatted base).
For foam mattresses: Ensure adequate ventilation between slats.
Mattress should not overhang bed frame edges.
Check mattress warranty for compatibility requirements.
Adjustable slats allow for custom firmness settings.

WARNING! Do not use with mattresses exceeding recommended thickness. Ensure proper support for mattress type.

Disassembly & Moving

To move or store the bed frame, follow disassembly instructions.

Reverse assembly steps: Remove mattress, then slats, then center support, finally disconnect side rails from headboard/footboard.

Keep all hardware in labeled bags for reassembly.

Warranty Information

IKEA limited warranty: 10 years against manufacturing defects. Warranty covers structural frame and slats. Does not cover normal wear, improper assembly, or accidental damage. Register warranty online at IKEA website. Keep receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Squeaking noises	Loose connections	Tighten all bolts and screws; apply wax to joints.
Bed frame wobbles	Uneven floor or loose hardware	Check floor level; tighten all connections; use shims if needed.
Slats slipping out	Clips not properly secured	Reinstall slats and ensure clips are firmly attached.
Difficulty assembling	Misaligned parts	Disassemble and restart from step 1; ensure parts are oriented correctly.
Cracks in wood	Over-tightening or impact	Do not overtighten; contact IKEA for replacement parts if cracked.

Customer Service: 1-888-888-4532; www.ikea.com

Spare Parts: Available through IKEA customer service or website.