IKEA HÖLJES 603.257.94 Lighting instructions manual

The IKEA HÖLJES 603.257.94 is a modern LED lighting fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, multiple color temperature settings, and a sleek Scandinavian design. It includes a remote control for convenient operation, a mounting kit for ceiling or wall installation, and complies with international safety standards. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Remote Control 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Mounting bracket, Power adapter, Wall mounting screws, User manual.

FeatureDescription
LED PanelEnergy-efficient LED array with long lifespan
Remote ControlWireless control for brightness and color temperature
Mounting BracketFor secure ceiling or wall installation
Power AdapterConverts AC to DC for safe operation
Brightness ControlAdjustable from 10% to 100% intensity
Color TemperatureSwitch between warm white (2700K) and cool white (5000K)
ON/OFF SwitchManual power control on the fixture
Memory FunctionRemembers last brightness and color settings
Safety Cut-offAutomatic thermal protection
DimmableCompatible with standard wall dimmers (if supported)

Installation

Unpack and inspect all contents. Ensure you have the proper tools.

  1. Choose location: Select ceiling or wall location with adequate support.
  2. Mount bracket: Use provided screws to secure mounting bracket to surface.
  3. Connect wires: Follow wiring diagram (Live, Neutral, Ground) if hardwired, or plug in power adapter.
  4. Attach light fixture: Align fixture with bracket and secure with locking mechanism.
  5. Install remote batteries: Insert 2 AAA batteries into remote control.

WARNING! Turn off power at circuit breaker before installation. Ensure fixture is securely mounted to prevent falling.

First-Time Setup

After installation, restore power and configure settings.

  1. Power on: Turn on at switch or circuit breaker.
  2. Pair remote: Point remote at fixture and press POWER button to establish connection.
  3. Adjust brightness: Use +/- buttons on remote to set desired light level.
  4. Select color temperature: Press COLOR button to cycle through warm/cool white options.
  5. Test functions: Verify all remote controls work properly.

CAUTION! Do not look directly at LED light source. Avoid installing in damp locations unless rated for such use.

Specifications

Controls and Settings

Manual control via ON/OFF switch on fixture. Remote control for advanced functions.

Remote buttons: POWER, Brightness +/-, COLOR (cycles temperature), MEMORY (saves current setting), RESET.

Brightness: Adjust in 10% increments from 10% to 100%. Color Temperature: Toggle between warm white (2700K) and cool white (5000K). Memory Function: Saves current brightness and color setting for next power-on. Reset: Hold POWER + MEMORY for 5 seconds to restore factory defaults.

Connecting to Power

Two installation methods: Hardwired to electrical box or plug-in via power adapter.

  1. Hardwired: Connect fixture wires to household wiring (Live=Brown, Neutral=Blue, Ground=Green/Yellow).
  2. Plug-in: Connect power adapter to fixture DC jack, then plug adapter into wall outlet.
  3. Secure connections: Use wire nuts for hardwired installation, ensure no exposed wires.
  4. Test: Turn on power and verify operation.

Tip: For plug-in installation, ensure outlet is easily accessible and not overloaded.

Using the Remote Control

Remote operates up to 8 meters distance with clear line of sight.

  1. Power: Press to turn light on/off.
  2. Brightness: Press + to increase, - to decrease light intensity.
  3. Color: Press to toggle between warm and cool white light.
  4. Memory: Press to save current brightness and color setting.
  5. Reset: Hold POWER + MEMORY for 5 seconds to reset to factory defaults.

WARNING! Keep remote away from children. Replace batteries when control becomes unresponsive.

Smart Features

Memory Function: Automatically recalls last used brightness and color temperature when powered on. Thermal Protection: Automatically reduces brightness if fixture overheats, prevents damage. Flicker-Free: Stable light output without visible flicker, reduces eye strain.

Care & Cleaning

Turn off power and allow to cool before cleaning. Use soft, dry cloth to wipe surface. For stubborn dirt, use slightly damp cloth with mild detergent, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or spray directly on fixture. Never immerse in water.

Regulatory Information

CE marked: Complies with European safety standards. RoHS compliant: Contains no hazardous substances. Waste Electrical disposal: Do not dispose with household waste; recycle at designated facility. For support, visit www.ikea.com or contact local IKEA customer service. 5-year limited warranty included.

Troubleshooting

SymptomPossible CauseCorrective Action
Light doesn't turn onNo power / Loose connectionCheck circuit breaker; ensure power switch is on; verify all connections are secure.
Remote not workingBatteries / Distance / ObstaclesReplace batteries; reduce distance to under 8m; ensure clear line of sight.
Flickering lightLoose connection / Incompatible dimmerCheck all wire connections; if using dimmer, ensure it's LED-compatible.
Light dimmer than expectedThermal protection / SettingAllow fixture to cool; check brightness setting on remote.
Color not changingRemote pairing / Function lockRe-pair remote (hold POWER near fixture for 10 seconds); check for function lock.

Reset: Hold POWER + MEMORY on remote for 5 seconds to restore factory settings.

Service: Contact IKEA customer service or visit www.ikea.com for warranty claims.

IKEA HÖLJES 603.257.94 Lighting instructions manual © - All Rights Reserved 2025