IKEA HÖGÖN 204.114.30 Umbrella instructions manual

The IKEA HÖGÖN 204.114.30 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a durable polyester canopy, a sturdy aluminum and steel frame, a manual tilt mechanism for sun angle adjustment, a crank handle for easy opening and closing, and a weighted base for stability. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning & Stability 7. Tilt Adjustment 8. Safety Features 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Polyester canopy, Aluminum pole, Steel ribs, Crank handle, Tilt mechanism, Weighted base plate.

Feature	Description
Canopy	Water-resistant polyester fabric for sun and light rain protection
Frame	Powder-coated aluminum pole and steel ribs for durability
Crank Handle	For smooth opening and closing of the canopy
Tilt Mechanism	Manual lever to adjust canopy angle for optimal shade
Base Plate	Weighted design to provide stability (sand or weights may be added)
Vent	Top vent to allow wind passage and reduce uplift
Carry Handle	Integrated handle on pole for easier relocation
OPEN/CLOSE	Operated via the crank handle
TILT LOCK	Secures the canopy at the desired angle
POLE HEIGHT	Adjustable via locking pin (if model includes)

Assembly Instructions

Unpack all parts and check against the included parts list. Assemble on a clean, flat surface.

Attach the base: Place the weighted base plate on the ground. Insert the bottom end of the main pole into the base socket and secure with the provided bolt.
Assemble the canopy frame: Connect the steel ribs to the hub at the top of the pole as per the diagram. Ensure all connections click into place.
Attach the canopy: Drape the polyester canopy over the frame. Align the canopy grommets with the rib ends and fasten securely using the provided plastic tips or ties.
Install the crank handle: Insert the crank handle into its designated socket on the pole and secure it.
Final check: Ensure all bolts are tightened and the canopy is evenly tensioned.

WARNING! Assembly requires two people. Be careful of pinch points when connecting ribs. Do not overtighten bolts.

First-Time Setup

After assembly, position the umbrella for first use.

Choose location: Place on a stable, level surface such as a patio or deck.
Add stability: Fill the base with sand or the provided weight bags if extra stability is needed in windy conditions.
Open the canopy: Turn the crank handle clockwise slowly and evenly until the canopy is fully open and taut.
Test tilt function: Release the tilt lock lever, adjust the canopy to the desired angle, and re-engage the lock.

CAUTION! Ensure the base is properly weighted before opening the umbrella, especially on windy days.

Specifications

Canopy Diameter: 2.5 meters (approx. 8.2 feet).
Pole Material: Powder-coated aluminum.
Rib Material: Steel.
Canopy Fabric: Polyester, water-resistant.
Operation: Manual crank open/close, manual tilt.
Tilt Range: Up to 90 degrees.
Base: Weighted steel plate (approx. 15 kg empty).
Model Number: HÖGÖN 204.114.30.
Intended Use: Outdoor residential use only.

Controls and Operation

Primary controls are located on the pole.

Crank Handle: Turn clockwise to open the canopy, counter-clockwise to close. Operate slowly and evenly.
Tilt Lever: Pull to release, push to lock. Adjust the canopy angle while the lever is released.
Height Adjustment (if applicable): Pull the locking pin, adjust pole height, re-insert pin.

Opening: Ensure area is clear. Turn crank handle clockwise until fully open. Do not force.
Closing: Turn crank handle counter-clockwise until canopy is fully closed and ribs are secure.
Storing: Always close and tilt the canopy to its neutral position before covering or storing.

Positioning & Stability

Correct positioning is crucial for safety and longevity.

Always place on a firm, level surface.
In windy conditions (> 30 km/h), close the umbrella.
For permanent placement, consider adding extra weight to the base (sandbags, weights).
Do not attach anything (e.g., lights, decorations) to the canopy or ribs that could catch wind.

Tip: Periodically check that all bolts and connections are tight, especially after storms or strong winds.

Tilt Adjustment

The tilt function allows you to block the sun as it moves.

Locate the tilt lock lever on the pole, just below the canopy hub.
Pull the lever outward to disengage the lock.
Gently push the canopy to the desired angle. You can tilt it side-to-side.
Release the lever to lock the canopy in its new position. Ensure it clicks into place.
Do not force the tilt mechanism. If it is stiff, check for obstructions.

WARNING! Do not adjust the tilt while the umbrella is open in windy conditions. Ensure the tilt is locked before leaving the umbrella unattended.

Safety Features

Vented Canopy: Reduces wind uplift. Tilt Lock: Prevents accidental movement. Weighted Base: Provides inherent stability. Always use the provided tie-down straps or additional weights in windy areas.

Care & Maintenance

Clean canopy with mild soap, lukewarm water, and a soft brush. Rinse thoroughly and allow to dry completely before closing. Wipe metal parts with a damp cloth. Store in a dry place during winter or prolonged bad weather. Use a protective cover when not in use for extended periods.

CAUTION! Do not use abrasive cleaners or high-pressure water jets. Do not close the canopy when wet, as this can cause mildew.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at www.ikea.com. The warranty covers material and manufacturing defects under normal residential use. Damage from improper assembly, misuse, or exposure to extreme weather conditions is not covered. For spare parts or support, contact your local IKEA store or visit the IKEA website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Umbrella is wobbly	Loose connections / insufficient base weight	Tighten all bolts and connections. Add sand or weights to the base.
Canopy difficult to open/close	Obstructed mechanism / damaged ribs	Check for fabric caught in joints. Lubricate the crank mechanism with silicone spray if stiff. Inspect ribs for bends.
Canopy does not stay tilted	Tilt lock not engaged / worn mechanism	Ensure the tilt lever is fully pushed in to lock. If loose, contact IKEA for a replacement part.
Water pooling on canopy	Canopy not taut / fabric sagging	Open the umbrella fully. Gently tension the canopy by hand. Ensure ribs are correctly extended.
Rust on metal parts	Exposure to moisture	Clean with a damp cloth and dry thoroughly. Apply a touch-up paint (if provided) to small areas. Store indoors when not in use.

Spare Parts: Available through IKEA customer service.

Support: Visit www.ikea.com or contact your local IKEA store.