IKEA HÅRSLINGA 195.169.61 Floor Lamp instructions manual

The IKEA HÅRSLINGA 195.169.61 is a modern floor lamp featuring a tripod base, a slender metal frame, and a fabric shade. It provides ambient lighting suitable for living rooms, bedrooms, or reading corners. The lamp requires assembly and uses an E27 bulb (max 15W LED or equivalent, not included). Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Assembly Instructions 5. Installation & Placement 6. Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Tripod metal base, adjustable metal frame, fabric shade, integrated on/off switch on cord, E27 socket.

Feature	Description
Tripod Base	Provides stable support on flat surfaces
Metal Frame	Slender, adjustable height design
Fabric Shade	Soft, diffused light output
E27 Socket	For standard screw-type bulbs (max 15W LED)
On/Off Switch	Located on the power cord for easy access
Power Cord	Standard length for placement near outlet

Package Contents

Unpack and verify all parts are present before assembly.

Tripod base (3 legs)
Central metal pole (main frame)
Fabric lamp shade
Hardware pack (screws, bolts, washers)
Instruction manual

NOTE: Light bulb and batteries (if applicable for remote models) are not included.

Safety Information

Read all instructions before assembly and use.

Use only with E27 bulb, max 15W LED or equivalent. Do not exceed wattage.
Ensure lamp is placed on a stable, flat surface to prevent tipping.
Keep away from flammable materials, water, and heat sources.
Unplug before changing bulb or cleaning.
Do not use if cord or plug is damaged.

WARNING! Risk of electric shock or fire if misused. Not for outdoor use.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Phillips screwdriver (not included).

Attach tripod legs to central hub using provided bolts. Tighten securely.
Insert metal pole into hub and secure with set screw.
Attach lamp socket assembly to top of pole, following wiring diagram if included.
Place fabric shade over socket assembly and secure with retaining ring or clips.
Route power cord along frame to keep it tidy.

CAUTION! Ensure all connections are tight and stable before use.

Installation & Placement

Choose location near power outlet, on flat surface.

Place assembled lamp in desired location, ensuring tripod legs are fully extended.
Plug power cord into grounded wall outlet.
Insert appropriate E27 bulb (max 15W LED recommended).
Switch on using cord switch.

Tip: Avoid placing in high-traffic areas where cord may become a tripping hazard.

Operation

Simple on/off operation via switch on cord.

To turn on: Press switch to "I" or "On" position.
To turn off: Press switch to "O" or "Off" position.
Adjust lamp position by gently tilting frame if design allows.

NOTE: Lamp may become warm during extended use. This is normal.

Care & Maintenance

Unplug lamp before any maintenance.

Cleaning: Wipe metal parts with dry, soft cloth. Use vacuum brush attachment for fabric shade.
Bulb Replacement: Allow bulb to cool. Unscrew old bulb, screw in new E27 bulb (max 15W LED).
Storage: Disassemble if needed, store in dry place.

CAUTION! Do not immerse in water or use abrasive cleaners.

Specifications

Model: HÅRSLINGA 195.169.61
Type: Floor Lamp
Base: Tripod, metal
Frame: Adjustable metal
Shade: Fabric
Bulb: 1 x E27 max 15W LED (not included)
Switch: On/off on cord
Cord Length: Standard (check local packaging)
Voltage: 120V AC, 60Hz (or local standard)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out / not plugged in	Replace bulb; ensure plug is securely in outlet.
Lamp flickers	Loose bulb / faulty connection	Tighten bulb; check socket and cord connections.
Lamp unstable	Legs not fully extended / uneven floor	Extend all tripod legs; place on flat surface.
Overheating	Bulb wattage too high	Use only recommended bulb (max 15W LED).
Switch not working	Faulty switch / internal wiring	Unplug and contact customer support.

Reset: Unplug for 30 seconds, then plug back in.

Warranty & Support

IKEA limited warranty applies (check local terms). For assistance, visit www.ikea.com or contact your local IKEA store. Keep receipt for warranty claims.

Recycling: Dispose of electronic components according to local regulations.