IKEA HOVSTA 003.963.41 Picture Frame instructions manual

The IKEA HOVSTA picture frame (article number 003.963.41) is a versatile and stylish frame designed to display your favorite photos, artwork, or certificates. It features a classic design with a clean border, available in various sizes, and is constructed from durable materials. Below are key sections for safety, assembly, usage, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Mounting & Hanging 5. Inserting & Changing Pictures 6. Care & Cleaning 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Frame front with glass/acrylic, Frame back (hardboard), Stand-up leg(s) or hanging hardware, Mounting clips or springs.

Part NameQuantityDescription
Frame Front1Main frame with transparent cover (glass or acrylic)
Frame Back1Hardboard backing panel
Stand-up Leg1 or 2For tabletop display (if included)
Hanging Hardware1 setD-rings, screws, wall anchors (if included)
Mounting Clips/Springs4 or moreSmall metal clips to secure backing
Instruction Sheet1This manual

Note: Tools (screwdriver, hammer) are not included.

Safety Information

Read all instructions before assembly and use.

  1. Glass Warning: If frame includes glass, handle with care to avoid breakage and injury.
  2. Small Parts: Keep mounting clips and screws away from children and pets.
  3. Wall Mounting: Ensure wall is suitable for weight; use appropriate anchors for wall type.
  4. Placement: Do not place in direct sunlight or high humidity to prevent damage.

WARNING! Glass can break. Avoid impact. Use two people for large frames.

Assembly Instructions

Follow steps in order. Work on a clean, soft surface to prevent scratches.

  1. Prepare: Lay frame front face down on a soft cloth or towel.
  2. Insert Picture: Place your photo/artwork against the backing board, ensuring it is centered.
  3. Secure Backing: Position the backing board over the picture. Attach mounting clips or springs around the frame edges to hold backing firmly.
  4. Attach Stand/Leg: If using as tabletop frame, attach stand-up leg(s) to back according to design (snap-on or screw-in).
  5. Final Check: Ensure all clips are secure and picture is straight behind the glass/acrylic.

Tip: For frames with acrylic, remove protective film from both sides before assembly.

Mounting & Hanging

For wall mounting, use included hardware or suitable alternatives.

  1. Locate Stud/Use Anchors: Use a stud finder for solid mounting. For drywall, use wall anchors provided.
  2. Attach Hanging Hardware: If D-rings are included, screw them into the back of the frame at equal distances from top.
  3. Mark Wall: Hold frame against wall at desired height. Mark positions for screws/anchors through D-rings.
  4. Install Wall Fasteners: Drill holes (if needed) and install screws/anchors into wall.
  5. Hang Frame: Hang frame on screws, ensuring it is level.

CAUTION! Ensure frame is securely mounted to prevent falling.

Inserting & Changing Pictures

To change the displayed image:

  1. Lay frame face down on soft surface.
  2. Carefully remove mounting clips/springs using a flat tool if needed.
  3. Remove backing board and old picture.
  4. Insert new picture, ensuring it is centered within the frame opening.
  5. Replace backing board and re-secure all clips/springs.

Note: For frames with a rear loading slot, slide picture in from the back without disassembling.

Care & Cleaning

Proper care ensures long-lasting appearance.

CAUTION! Do not spray cleaner directly onto frame; apply to cloth first.

Specifications

Troubleshooting

IssuePossible CauseSolution
Frame won't stand upLeg not attached correctly or missingCheck leg attachment; ensure it is snapped or screwed in fully.
Picture appears crookedPicture not centered during assemblyDisassemble and re-center the picture behind the opening.
Backing falls outMounting clips not secure or missingEnsure all clips are in place and pressed firmly into frame groove.
Frame wobbles on wallWall fasteners not secure or uneven hangingRe-tighten screws/anchors; use a level to ensure D-rings are even.
Dust under glassDust trapped during assemblyDisassemble, clean glass and picture, reassemble in a dust-free area.

Warranty & Support

IKEA products come with a limited warranty. Refer to the IKEA warranty terms for your country.

For missing parts or assembly help: Contact IKEA customer service or visit the IKEA store where purchased.

Online Resources: Assembly videos and guides may be available at www.ikea.com.

Recycling: Dispose of packaging and product responsibly according to local regulations.

IKEA HOVSTA 003.963.41 Picture Frame instructions manual © - All Rights Reserved 2025