IKEA HOLMSUND 891.507.55 Chaise instructions manual

The IKEA HOLMSUND 891.507.55 is a modular chaise lounge section designed to be combined with other HOLMSUND sofa components. It features a removable cover (machine washable at 40°C), high resilience foam and pocket springs for comfort, and a solid wood frame. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Attaching to Other Sections 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Tools Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Number	Description	Quantity
101	Chaise frame (left or right orientation)	1
102	Seat cushion with pocket springs	1
103	Back cushion	1
104	Removable fabric cover	1 set
105	Connector bolts	4
106	Allen key	1
107	Legs with pre-attached screws	4

Note: The chaise is handed (left or right). Ensure you have the correct orientation for your sofa configuration.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Two-Person Lift: The frame is heavy. Always use two people to lift and move parts to avoid injury or damage.
Stable Surface: Assemble on a clean, soft, non-scratch surface (e.g., carpet or blanket).
Secure Connections: Tighten all bolts and screws firmly. Periodically check tightness.
Weight Limit: Maximum load: 330 lbs (150 kg) distributed evenly.

WARNING! Do not stand or jump on the chaise. Improper use may cause collapse and serious injury.

Step-by-Step Assembly

Estimated assembly time: 30-45 minutes. Follow steps in order.

Attach Legs: Turn frame upside down on protected surface. Screw all four legs into pre-drilled holes by hand, then tighten fully with the Allen key.
Return Frame Upright: Carefully flip the frame right-side up with assistance.
Place Seat Cushion: Insert the seat cushion (part 102) into the frame. Ensure it sits flat and even.
Place Back Cushion: Position the back cushion (part 103) against the back of the frame.
Install Fabric Cover: Stretch the removable cover over the cushions and frame. Secure all zippers and fasteners completely.
Final Check: Ensure all cushions are properly aligned and the cover is smooth.

Tip: Do not overtighten leg screws, as this may strip the wood.

Attaching to Other Sections

The HOLMSUND chaise connects to other HOLMSUND sofa sections (e.g., armless chair, corner section) to form a modular sofa.

Position the chaise adjacent to the other section, aligning the connector plates on the frames.
Insert the connector bolts (part 105) through the aligned holes.
Using the Allen key, tighten the bolts securely to join the sections firmly together.
Repeat for additional connection points. A complete sofa may require multiple bolts.

CAUTION! Ensure the combined sofa is on a level floor and does not rock. Re-tighten connectors after the first week of use.

Care & Maintenance

Proper care extends the life of your chaise.

Fabric Cover: Remove and machine wash at 40°C (104°F). Use mild detergent. Do not bleach. Tumble dry low. Iron on low heat if needed.
Frame & Cushions: Vacuum regularly. Spot clean with a damp cloth and mild soap. Do not soak cushions.
Rotation: Rotate and flip seat cushions every few months for even wear.
Sunlight & Heat: Avoid prolonged direct sunlight and proximity to heat sources to prevent fading and fabric damage.

WARNING! Never dry clean the cover or use harsh chemicals, as this may damage the fabric and void the warranty.

Specifications

Article Number: 891.507.55
Dimensions (WxDxH): 35" x 63" x 33" (89cm x 160cm x 84cm)
Seat Depth: 24" (61cm)
Seat Height: 17" (43cm)
Frame Material: Solid wood (pine, birch), Plywood, Particleboard
Fill Material: High resilience foam, Polyester wadding, Pocket springs (seat)
Cover Material: 100% polyester (Removable, machine washable)
Weight: 55 lbs (25 kg)
Max Load: 330 lbs (150 kg)

Troubleshooting

Issue	Possible Cause	Solution
Chaise feels wobbly	Legs not tightened; uneven floor	Tighten all leg screws. Place on a level surface or use furniture pads under shorter legs.
Cushions feel lumpy or uneven	Fill material settling; cover not fitted properly	Plump and rotate cushions. Remove and re-install the cover, ensuring it's fully seated.
Squeaking noise	Wood joints rubbing; loose connectors	Tighten all frame connectors and bolts. Apply a small amount of furniture wax to rubbing wood joints.
Cover shrinking after wash	Washed in hot water or high heat dried	Always follow care label (40°C wash, low heat dry). While damp, stretch cover gently back into shape.
Difficulty connecting to other sections	Misaligned connector holes	Loosen adjacent bolts slightly to align holes, then re-tighten all bolts.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included with your purchase or available at IKEA stores for full terms and duration.

For Missing Parts or Assembly Support: Visit the IKEA website or contact your local IKEA store.

IKEA Customer Support: Visit www.ikea.com or call the number listed for your country.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood, metal, and fabric can often be recycled separately.