IKEA HJÄLPA 094.312.22 Shelf instructions manual

The IKEA HJÄLPA 094.312.22 is a versatile wall-mounted shelf unit designed for storage and display. Constructed from particleboard with a white foil finish, it features a clean, modern design suitable for various rooms. Below are key sections for safety, parts list, assembly instructions, mounting guidelines, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Mounting 6. Weight Capacity & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Name	Quantity	Description/Image Ref.
Shelf Board	2	Main horizontal shelves
Side Panel	2	Vertical side supports
Back Panel	1	Stabilizing rear panel
Cam Lock	4	Plastic connector with screw
Screw	8	Wood screws for assembly
Wall Anchor	2	For secure mounting to wall
Mounting Screw	2	For attaching shelf to wall
Allen Key	1	Tool for tightening cam locks
Instruction Manual	1	This document

Tools Required

Tools not included that you will need:

Phillips screwdriver
Hammer (for wall anchors if needed)
Pencil
Level
Stud finder (recommended)
Electric drill (optional, for easier mounting)

Safety Instructions

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using the provided wall attachment devices.

Two-Person Assembly: Some steps are easier and safer with two people.
Stable Surface: Assemble on a soft, clean surface to avoid scratches.
Check Wall Structure: Mount only to solid walls (wood studs, concrete, brick). Use appropriate anchors for your wall type.
Child Safety: Do not allow children to climb or hang on the shelves.
Weight Limit: Do not exceed the maximum load capacity (see Specifications).

CAUTION! Keep small hardware away from children to prevent choking.

Assembly Steps

Follow the numerical order shown in the included pictorial guide. Refer to part letters/numbers.

Attach Side Panels to Back Panel: Lay the back panel flat. Align the pre-drilled holes on the side panels with those on the back panel. Insert and hand-tighten the provided screws.
Install Cam Locks: Insert the plastic cam locks into the designated holes on the inside of the side panels. Turn them to the "open" position (arrow pointing to insertion hole).
Attach First Shelf: Position the lower shelf board so its metal pins align with the cam locks on the side panels. Gently tap into place. Using the Allen key, turn each cam lock 90° clockwise to the "locked" position. You should hear a click.
Attach Second Shelf: Repeat step 3 for the top shelf board.
Final Check: Ensure all cam locks are fully tightened and all screws are secure. The unit should feel rigid with no wobble.

Tip: Do not fully tighten any screw until all parts are loosely fitted together, then tighten all connections.

Wall Mounting

THIS STEP IS MANDATORY FOR STABILITY AND SAFETY.

Locate Studs: Use a stud finder to locate solid wood studs in your wall. Mark the center of two studs with a pencil. If studs are not in the correct position, you must use heavy-duty wall anchors suitable for your wall type (drywall, plaster, concrete).
Position Shelf: With help, hold the assembled shelf unit against the wall in its desired location. Use a level to ensure it is perfectly horizontal. Mark the positions of the two keyhole slots on the back panel onto the wall.
Install Wall Fixings: At your marks, drill pilot holes. Install the provided wall anchors or screws directly into studs.
Mount Shelf: Lift the shelf and hook the keyhole slots onto the screw heads. Pull downward slightly to lock into place.
Security Check: Gently try to lift and pull the shelf away from the wall. It should not move. Ensure it feels completely secure.

WARNING! An unsecured shelf can tip over, causing property damage or injury.

Weight Capacity & Specifications

Model: HJÄLPA 094.312.22
Color: White
Material: Particleboard, Foil, Plastic fittings
Dimensions (W x H x D): 60cm x 80cm x 30cm (approx. 23 5/8" x 31 1/2" x 11 3/4")
Maximum Load per Shelf: 15 kg (33 lbs) evenly distributed.
Total Unit Weight: 8.5 kg (18.7 lbs)
Wall Mounting Hardware Included: Yes

Care & Maintenance

To ensure long-lasting appearance and function:

Cleaning: Wipe with a damp, soft cloth. Wipe dry immediately. Do not allow moisture to seep into edges.
Avoid: Abrasive cleaners, scouring pads, solvents, or ammonia-based products.
Protect: Avoid prolonged direct sunlight and heat sources to prevent discoloration.
Check Tightness: Periodically (every 6-12 months) check that all screws and cam locks are tight. Re-tighten if necessary.

CAUTION! Never stand or sit on the shelves.

Troubleshooting

Issue	Possible Cause	Solution
Shelf is wobbly	Cam locks not fully tightened; screws loose; not mounted to wall.	Tighten all cam locks and screws with provided tools. SECURE THE SHELF TO THE WALL.
Parts don't align	Assembly step out of order; panel upside down.	Disassemble and restart, carefully following step order and diagram orientation.
Cam lock won't turn	Metal pin not fully inserted; cam lock cross-threaded.	Ensure shelf board is fully seated against side panel. Loosen, realign, and try again.
Cannot mount to wall	No studs in desired location; wrong anchor type.	Use appropriate heavy-duty drywall anchors (not included) rated for the shelf's weight. Consult a hardware store.
Surface scratch/damage	Contact during assembly or use.	Assemble on soft blanket. Minor scratches can be touched up with a matching wax crayon (available at hardware stores).

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty leaflet included in the packaging or at IKEA stores for full terms and conditions.

Need Help?

Assembly Support: Visit the product page on www.ikea.com for the digital version of this manual and assembly video.
Missing Parts: Contact your local IKEA store or visit the Returns & Exchanges desk.
General Inquiries: IKEA Customer Support: 1-800-434-4532 (US).

Recycling: At end of life, disassemble and recycle materials according to local regulations.