IKEA HJÄLPA 394.833.99 Shelf instructions manual
The IKEA HJÄLPA 394.833.99 is a versatile wall-mounted shelf unit designed for storage and display. It features a clean, modern design, adjustable shelf positions, sturdy construction, and is intended for indoor use. Below are key sections for safety, parts list, assembly instructions, mounting guidelines, care, and warranty information.
Parts & Hardware
All components included in the package. Check against this list before starting assembly.
| Part Name | Quantity | Description/Image Ref. |
|---|
| Side Panel (Left) | 1 | Main vertical support with pre-drilled holes |
| Side Panel (Right) | 1 | Main vertical support with pre-drilled holes |
| Shelf Board | 3 | Rectangular shelves in various lengths |
| Back Panel | 1 | Stabilizing panel for wall attachment |
| Cam Lock Nuts | 8 | Plastic connectors for panels |
| Screws (Short) | 12 | For attaching shelves to side panels |
| Screws (Long) | 4 | For wall mounting back panel |
| Wall Anchors | 4 | For solid wall mounting (if needed) |
| Allen Key | 1 | Tool for tightening cam locks |
| Instruction Manual | 1 | This document |
Tools Required
Tools not included that you will need for assembly and mounting.
- Phillips Screwdriver (or cordless drill with screwdriver bit).
- Pencil.
- Level.
- Stud Finder (if mounting to wall studs).
- Hammer (for wall anchors if not using studs).
- Tape Measure.
NOTE: Using the correct tools ensures proper assembly and safety.
Assembly Instructions
Follow steps in order. Assemble on a soft, clean surface to avoid scratches.
- Prepare Parts: Lay out all parts and hardware. Identify left/right side panels.
- Connect Side Panels to Back Panel: Align back panel with side panels. Insert cam lock nuts into side panel holes, turn 90° clockwise to lock.
- Attach Shelves: Position shelves between side panels at desired height. Use short screws to secure shelves from underneath or through side panel holes as indicated.
- Tighten All Connections: Use the provided Allen key to ensure all cam locks are fully tightened. Do not overtighten.
- Check Stability: Gently rock the unit to ensure it is rigid before attempting to mount on the wall.
CAUTION! Do not stand or sit on the shelves. Assemble with a partner for larger units.
Wall Mounting
CRITICAL: This unit must be securely attached to the wall to prevent tipping.
- Locate Studs: Use a stud finder to locate solid wood studs in your wall. Mark their centers with a pencil.
- Position Unit: Hold the assembled shelf against the wall in the desired location. Use a level to ensure it is perfectly horizontal. Mark the mounting hole positions from the back panel onto the wall.
- Drill Pilot Holes: If mounting into studs, drill pilot holes slightly smaller than the long screws at your marks. If no stud is available, use the provided wall anchors: drill holes of the specified size for the anchors, insert anchors flush with the wall.
- Secure to Wall: Align the back panel with the holes. Insert the long screws through the back panel and into the studs or wall anchors. Tighten firmly but do not strip.
- Final Check: Pull gently on the unit to confirm it is firmly attached to the wall. Re-tighten screws if there is any movement.
WARNING! Failure to properly secure the unit to the wall can result in serious injury or damage from tipping.
Weight Limits & Usage
- Max Load per Shelf: 15 kg (33 lbs) evenly distributed.
- Total Max Load: 45 kg (99 lbs).
- Intended Use: For storing books, decorative items, small electronics, and other household goods.
- Not Designed For: Use as a workbench, step ladder, or to support televisions unless specifically stated. Do not place in damp areas (e.g., bathrooms) unless treated for moisture.
- Adjustable Shelves: Shelves can be repositioned by removing screws and reattaching at different pre-drilled holes.
Care & Maintenance
Clean with a soft, damp cloth. Wipe dry immediately.
DO NOT use abrasive cleaners, scouring pads, or chemical solvents as they may damage the finish.
Periodically check the tightness of all screws and wall mounts, especially in households with children.
Safety Information
To reduce the risk of serious injury or damage:
- Tip-Over Hazard: ALWAYS secure this furniture to the wall using the provided hardware and instructions.
- Heavy Items: Place heavier items on lower shelves.
- Children: Do not let children climb or hang on the shelves.
- Inspect: Before use, inspect for damaged parts. Do not assemble or use if any part is broken or missing.
- Correct Surface: Use only on flat, level, and stable floors.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|
| Shelf is wobbly | Cam locks not fully tightened; screws loose | Re-tighten all cam locks and shelf screws with the Allen key and screwdriver. |
| Unit not level on wall | Wall markings were not level; uneven floor | Detach from wall, re-mark using a level, and re-mount. Use shims if floor is uneven. |
| Screws won't tighten | Stripped screw head or hole; incorrect screw used | Do not force. Ensure you are using the correct screw. If hole is stripped, you may need a larger anchor or to mount into a stud. |
| Parts don't align | Assembly step skipped; panels reversed | Disassemble and restart from Step 1, ensuring left/right panels are correct per diagram. |
| Missing part | Package incomplete | Contact IKEA customer service with your product number (394.833.99) for replacement parts. |
Warranty & Support
IKEA limited warranty applies. For product support, spare parts, or assembly questions:
- Visit: www.ikea.com
- Contact your local IKEA store.
- Refer to your IKEA warranty card for specific terms and duration.
- Keep your receipt as proof of purchase.
This product is designed and intended for household use only.
IKEA HJÄLPA 394.833.99 Shelf instructions manual © - All Rights Reserved 2025