IKEA HEMNES 992.342.55 Bookcase instructions manual
The IKEA HEMNES 992.342.55 is a classic, solid wood bookcase with adjustable shelves, offering versatile storage for books, decorative items, and media. It features a timeless design, a sturdy construction, and a protective finish. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.
Parts & Hardware Included
Before assembly, verify all parts are present. Check the packaging materials thoroughly.
| Part Description | Quantity | Image Ref. |
|---|
| Side Panel (Left) | 1 | A |
| Side Panel (Right) | 1 | B |
| Top Panel | 1 | C |
| Bottom Panel / Plinth | 1 | D |
| Back Panel (Fiberboard) | 1 | E |
| Adjustable Shelves | 4 | F |
| Fixed Middle Shelf | 1 | G |
| Cam Lock Nuts | 10 | 1 |
| Screws (for back panel) | 20 | 2 |
| Wooden Dowels | 10 | 3 |
| Cam Lock Screws | 10 | 4 |
| Wall Attachment Device | 1 set | 5 |
NOTE: Some small parts may be packed within the panels or in separate plastic bags. Do not discard any packaging until assembly is complete.
Tools Required
You will need the following tools (not included):
- Phillips screwdriver (size #2 recommended)
- Hammer (for tapping dowels if needed)
- Level (optional, for final positioning)
- Pencil (for marking wall if attaching)
- Drill (for wall attachment, if applicable)
Safety Instructions
WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. This bookcase must be permanently attached to the wall using the provided anti-tip device.
- Two-Person Job: Assembly and moving require at least two people due to size and weight.
- Stable Surface: Assemble on a soft, clean surface (e.g., carpet, blanket) to prevent scratches.
- Check Parts: Do not use damaged or defective parts. Contact IKEA for replacements.
- Secure Assembly: Tighten all fittings firmly but do not overtighten.
- Wall Attachment: Always secure the bookcase to the wall, especially in homes with children or pets.
Step-by-Step Assembly
Follow the numerical steps in the included pictorial guide. This is a summary of key phases.
- Prepare the Panels: Lay out all panels with the finished side facing down on a protected surface.
- Connect Side and Bottom Panels: Insert wooden dowels (3) into the pre-drilled holes in the bottom panel (D). Align with side panels (A, B) and join. Secure using cam lock nuts (1) and screws (4) as shown.
- Attach Fixed Middle Shelf: Insert dowels into the ends of the fixed shelf (G). Align with the pre-drilled holes inside the side panels and attach using cam locks.
- Attach the Top Panel: Place the top panel (C) onto the assembled frame. Secure from the inside using the remaining cam locks and screws.
- Mount the Back Panel: Place the fiberboard back panel (E) into the groove. Secure it using the provided screws (2) around the entire perimeter. Do not overtighten.
- Insert Adjustable Shelves: Place the adjustable shelves (F) onto the shelf support pins. Ensure they are level and secure.
- Attach to the Wall: THIS STEP IS MANDATORY. Use the provided wall attachment device (5). Locate wall studs and secure the bookcase according to the separate wall attachment instructions.
Tip: Assemble the bookcase close to its final location to avoid moving the fully assembled unit.
Adjusting Shelves
The four shelves (F) are adjustable to accommodate items of various heights.
- Remove all items from the shelf you wish to adjust.
- Lift the shelf slightly up and then pull it forward to remove it from the support pins.
- Choose the desired height by selecting a pair of pre-drilled holes on the inner sides of the side panels.
- Insert the metal shelf support pins into the chosen holes.
- Place the shelf onto the pins, ensuring it is level and seated firmly on all four pins.
CAUTION! Do not overload shelves. Maximum load per shelf is 66 lbs (30 kg). Distribute weight evenly.
Care & Maintenance
To maintain the finish and appearance of your solid wood bookcase:
- Dusting: Use a clean, soft, dry cloth. A microfiber cloth is recommended.
- Cleaning: Dampen the cloth with a mild soap solution if needed. Wipe dry immediately.
- Avoid: Abrasive cleaners, scouring pads, solvents, or furniture polishes that contain silicone.
- Protect: Avoid placing in direct sunlight or near heat sources to prevent fading or warping.
- Spills: Wipe spills immediately with a dry cloth.
Product Specifications
- Article Number: 992.342.55
- Design: HEMNES series
- Material: Solid wood, Fiberboard, Acrylic paint, Foil
- Color: Black-Brown
- Dimensions (W x H x D): 35 3/8" x 77 1/2" x 15 3/4" (90 cm x 197 cm x 40 cm)
- Max. Load per Shelf: 66 lbs (30 kg)
- Weight: Approximately 88 lbs (40 kg)
- Package(s): 2
Troubleshooting
| Issue | Possible Cause | Solution |
|---|
| Bookcase wobbles | Floor uneven; fittings loose; not attached to wall | Use shims under plinth; tighten all cam locks and screws; secure to wall studs. |
| Shelves sag or are unstable | Overloaded; not properly seated on pins | Reduce weight to under 66 lbs per shelf. Remove and re-seat shelf on all four pins. |
| Cam lock won't tighten | Dowel not fully inserted; cross-threaded | Disassemble step, ensure dowel is flush. Re-engage cam lock straight. |
| Back panel bulging or loose | Screws not tightened evenly; panel warped | Loosen all screws, reposition panel in groove, retighten screws evenly from center outwards. |
| Difficulty inserting dowels | Holes misaligned; debris in hole | Align panels perfectly. Clean holes with a dry cloth. Do not force. |
Warranty & Support
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.
Missing Parts or Need Help?
- Online: Visit www.ikea.com for assembly guides, spare parts, or contact options.
- Phone: Contact your local IKEA customer support center.
- In Store: Bring your article number (992.342.55) to the Returns & Exchanges desk.
REMINDER: The wall attachment device is included for your safety. Its use is mandatory to prevent tip-over accidents.
IKEA HEMNES 992.342.55 Bookcase instructions manual © - All Rights Reserved 2025