IKEA HEMNES 704.249.77 TV Stand instructions manual

The IKEA HEMNES 704.249.77 is a classic TV stand made from solid wood and wood-based materials, featuring a timeless design with clean lines and a durable finish. It includes a spacious top surface, storage shelves or drawers, and cable management features. Below are key sections for safety, parts list, assembly instructions, care, and troubleshooting.

Parts & Hardware

Before assembly, check that you have all parts listed below. The hardware pack is typically found in a plastic bag inside one of the panels.

Safety Information

Read all instructions before starting assembly. Ensure a safe working environment.

1. Work Area: Assemble on a soft, clean surface (e.g., carpet or blanket) to avoid scratching parts.
2. Lifting: The assembled unit is heavy. Use two people for lifting and moving.
3. Children: Keep small parts and packaging materials away from children to prevent choking.
4. Tools: Use only the provided Allen key. Do not overtighten screws.
5. Stability: To prevent tip-over, secure the TV stand to the wall using the provided wall attachment device and hardware, especially if children are present.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the included restraint device.

Assembly Instructions

Follow the numbered steps in the included pictorial guide. This is a summary of key assembly phases.

1. Prepare: Identify all parts using the included guide. Lay them out in the order of assembly.
2. Frame Assembly: Connect side panels (A) to the bottom panel (B) using dowels and cam locks. Do not fully tighten until the structure is square.
3. Install Back Panel: Slide the back panel (C) into the grooves on the side and bottom panels. Secure with provided screws to add rigidity.
4. Install Shelves/Drawers: If your model has an adjustable shelf (E), insert it at the desired height. For drawers, assemble the drawer box and attach runners to the side panels before sliding in the drawer fronts (D).
5. Attach Top Panel: Place the top panel (B) onto the assembled frame. Secure from underneath using screws or cam locks as indicated.
6. Final Tightening & Leveling: Go back and ensure all cam locks are fully tightened with the Allen key. Check that the unit is level on the floor; adjust furniture glides if necessary.
7. Wall Attachment: THIS STEP IS CRITICAL. Use the included wall restraint bracket and screws to attach the top rear of the TV stand to a solid wall stud.

TIP: Assemble the unit close to its final location to avoid moving the heavy, assembled product.

Product Specifications

• Article Number: 704.249.77
• Designer: IKEA of Sweden
• Material: Solid wood, Particleboard, Fiberboard, Plastic, Steel
• Finish: Stain and lacquer (Black-Brown shown, other colors may vary)
• Dimensions (W x H x D): Approx. 47 1/4" x 19 5/8" x 17 3/4" (120cm x 50cm x 45cm). Confirm on product label.
• Max. TV Size Recommended: Up to 55 inches (check weight limit).
• Top Shelf Load Capacity: 66 lbs (30 kg) max, evenly distributed.
• Lower Shelf Load Capacity: 44 lbs (20 kg) max, per shelf.
• Weight of Product: Approx. 55 lbs (25 kg).

Care & Maintenance

Proper care will maintain the appearance and longevity of your TV stand.

Cleaning:

• Dust regularly with a soft, dry cloth.
• For stains, use a damp cloth with a mild cleaner. Wipe dry immediately.
• DO NOT use abrasive cleaners, scouring pads, or solvents as they can damage the finish.

Maintenance:

• Check and retighten cam locks and screws periodically, especially after moving the unit.
• Ensure the wall attachment remains secure.
• Avoid placing in direct sunlight or near heat sources to prevent fading or warping.

Mounting Your TV

This TV stand is designed to support a TV placed directly on its top surface.

1. Check Compatibility: Ensure your TV's feet/stand width is less than the depth of the TV stand top and fits securely without overhang.
2. Center the TV: Place the TV centrally on the stand for optimal weight distribution and stability.
3. Do Not Overhang: The TV should not extend beyond the edges of the stand.
4. Wall-Mounted TVs: If you are wall-mounting your TV above this stand, ensure the wall mount is installed into wall studs separately and does not rely on the TV stand for support.

WARNING! Never place a TV on a shelf other than the reinforced top surface. Do not place other heavy items on top of the TV.

Cable Management

The HEMNES TV stand includes features to help organize cables for a clean look.

1. Rear Access: The open back or pre-cut holes allow cables to pass through easily.
2. Routing: Route power cords, HDMI cables, and other wires down from the TV, through the designated openings, and to your devices on the shelves below.
3. Use Cable Ties: Use the included cable ties or your own to bundle cables together behind the stand, preventing tangles and tripping hazards.
4. Power Strip: Place a power strip on one of the lower shelves or in the cable management area (if provided) to connect all devices.

Weight Limits & Stability

Adhering to weight limits is crucial for safety and product integrity.

STABILITY RULE: Always place heavier items on lower shelves. The heaviest item (the TV) must be centered on the top. Never place a TV on a pull-out drawer or an open door.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions, including warranty duration and coverage for different materials.

General Coverage: Warranty covers manufacturing defects in materials and workmanship under normal household use.

Support: For warranty claims, spare parts, or missing components, contact IKEA Customer Support:
Phone: 1-888-888-4532
Website: www.ikea-usa.com
Visit your local IKEA store with your receipt and article number (704.249.77).

Troubleshooting

Important: If you are unsure about any assembly step or the stability of the assembled product, stop and contact IKEA for assistance.