IKEA HEMNES 503.717.72 with 3 Drawers Cabinet instructions manual

The IKEA HEMNES 503.717.72 is a three-drawer cabinet from the HEMNES series, constructed primarily from solid wood and wood-based materials. It features a classic design with a white finish, three spacious drawers with metal runners for smooth operation, and a sturdy frame. This manual provides essential information for safety, assembly, installation, use, care, and troubleshooting.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Installation & Leveling 5. Drawer Operation & Adjustment 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Key components include cabinet frame panels, drawer fronts, drawer boxes, metal drawer runners, back panel, and hardware package.

Component	Description	Quantity
Side Panels	Main left and right frame pieces	2
Top Panel	Cabinet top piece	1
Bottom Panel	Cabinet base piece	1
Drawer Fronts	White finished drawer faces	3
Drawer Boxes	Wooden drawer bodies	3
Drawer Runners	Metal slides for smooth operation	6 pairs
Back Panel	Fiberboard back for stability	1
Cam Locks & Pins	For panel connections	Set
Screws & Dowels	Various sizes for assembly	Set
Adjustable Feet	For leveling the cabinet	4

Safety Information

Read all instructions before beginning assembly. Ensure a clean, spacious work area.

Use Proper Tools: Assemble using the included Allen key. A hammer may be needed for dowels.
Lifting Safety: The cabinet and panels are heavy. Use two people to lift and maneuver parts to avoid strain or injury.
Child Safety: To prevent tip-over, the cabinet must be securely anchored to the wall using the provided wall attachment device and hardware.
Surface Protection: Assemble on a soft surface (e.g., carpet, blanket) to prevent scratching the finish.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided restraint device.

Assembly Instructions

Follow the numbered steps in the included pictorial guide. This is a summary of the key assembly phases.

Frame Assembly: Connect the side panels to the top and bottom panels using the cam locks and dowels. Ensure all connections are tight and square.
Back Panel Installation: Place the assembled frame face down. Insert the fiberboard back panel into the grooves and secure it with the provided nails or screws.
Drawer Runner Installation: Attach one part of each metal runner to the inside of the cabinet frame according to the spacing in the manual. Attach the matching part to the sides of each drawer box.
Drawer Assembly: Attach the drawer front to the drawer box using the screws from inside the box. Ensure it is centered and aligned before fully tightening.
Final Installation: Insert the drawers into the cabinet by engaging the runners. Test each drawer for smooth operation. Attach the adjustable feet to the bottom panel.

Tip: Do not fully tighten all cam locks until the entire frame is assembled and squared.

Installation & Leveling

Proper installation ensures stability and function.

Choose Location: Place the cabinet on a flat, solid floor against the intended wall.
Level the Cabinet: Adjust the four feet by twisting them to compensate for uneven floors. Use a spirit level on the top surface.
Wall Attachment (CRITICAL): Use the provided wall restraint bracket. Secure the bracket to a solid wall stud using the longer screws (not drywall anchors). Then, attach the cabinet to the bracket using the provided screws inside the top back of the cabinet.
Final Check: Gently try to tilt the cabinet forward. It should not move if properly secured.

CAUTION! Failure to secure the cabinet to the wall can result in serious injury or death from tip-over.

Drawer Operation & Adjustment

The drawers feature full-extension metal runners for easy access.

Opening/Closing: Pull drawer handle smoothly. To close, push gently until the drawer clicks shut.
Weight Limit: Do not exceed the recommended weight limit for each drawer (see specifications). Distribute weight evenly.
Alignment Adjustment: If a drawer is uneven or sticks, slightly loosen the screws holding the drawer front from inside the box, realign, and retighten.
Runner Maintenance: For smooth operation, runners generally do not need lubrication. If they become stiff, wipe clean with a dry cloth.

Care & Maintenance

Proper care will maintain the appearance and longevity of your cabinet.

Cleaning: Wipe with a damp cloth wrung out in a mild soap solution. Dry immediately with a clean, soft cloth.
Avoid: Abrasive cleaners, scouring pads, or harsh chemicals. Avoid prolonged exposure to direct sunlight or high humidity.
Scratches: Minor scratches on the white finish can sometimes be concealed with a matching wax filler pencil (not included).
Tightening: Periodically check and tighten any cam locks or screws that may loosen over time.

CAUTION! Do not use solvents or ammonia-based cleaners.

Specifications

Article Number: 503.717.72
Series: HEMNES
Color: White
Material: Solid wood, Particleboard, Fiberboard, Acrylic paint, Plastic
Dimensions (W x H x D): Approx. 36.5" x 37.75" x 18.5" (93 cm x 96 cm x 47 cm)
Drawer Dimensions (Internal, approx.): Varies per drawer; top drawer is typically shallower.
Max Load per Drawer: Refer to label inside drawer or manual (typically 20-30 lbs / 9-14 kg).
Weight of Product: Approx. 70 lbs (32 kg)
Required Tools for Assembly: Included Allen key, Hammer (for dowels), Screwdriver (for wall attachment).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or is difficult to open	Misaligned drawer front or runner	Realign drawer front by loosening attachment screws. Ensure runner parts are fully engaged and parallel.
Cabinet is wobbly	Uneven floor; feet not adjusted; frame not square	Adjust the four feet to level the cabinet. Check that all frame cam locks are fully tightened.
Drawer does not close fully	Object obstructing runner; drawer overloaded	Remove obstruction from drawer path. Remove some contents to reduce weight.
Gap between drawer fronts	Drawers misaligned during assembly	Loosen screws inside drawer box, adjust drawer front position evenly, then retighten.
Cam lock won't tighten	Dowel not fully inserted; cross-threaded	Disassemble the joint, ensure dowel is fully seated in both panels, and re-engage the cam lock straight.

Missing Parts? Contact IKEA for spare parts using the article number (503.717.72).

Warranty & Support

This IKEA product is covered by the IKEA Limited Warranty. Refer to the IKEA warranty brochure for specific terms and duration in your country.

For Assembly Support: Review the online assembly video at IKEA.com under this product page.

For Missing Parts or Product Support: Visit your local IKEA store or contact IKEA Customer Service online. Have the article number (503.717.72) and your receipt ready.

Important: The wall attachment device is included for safety. IKEA disclaims liability for any tip-over incident if the anchoring device is not installed and used as instructed.